Epoxidized soybean oil modified using fatty acids as tougheners for thermosetting epoxy resins: Part 1

A series of bio-rubber (BR) reactive tougheners for thermosetting epoxy resins was prepared by grafting renewable saturated fatty acids of different chain lengths (C6-C14) onto epoxidized soybean oil (ESO) at varying molar ratios. The tunable nature of the BR systems derives from the architecture and functionality of naturally occurring molecules. Control of BR reactivity and molecular weight by varying the degree of grafting and the chain length of the fatty acid was demonstrated. The BR-toughened samples were prepared by blending BRs with diglycidyl ether of bisphenol A (DGEBA), Epon 828, and stoichiometrically curing the mixture using an aromatic amine hardener, diethyl toluene diamine (Epikure W). Fracture surface morphology studies showed that tuning of phase separated particle sizes was possible depending on the BR type and weight fraction. The resulting toughening effect was evaluated by measuring the fracture toughness of control and toughened polymer samples. The use of BRs significantly improved the critical strain energy release rate and critical stress intensity factor values of thermosetting polymer samples without significantly reducing T_g and modulus. In addition to toughening and adding renewable content to petroleum-based thermosetting epoxy systems these new tougheners have low viscosity compared to common alternatives and aid ease of processing.     

Effect of Fe-Zn alloy layer on the corrosion resistance of galvanized steel in chloride containing environments

In this study, the effect of Fe-Zn alloy layer that is formed during galvanizing process on the corrosion behavior of galvanized steel has been investigated. The galvanostatic dissolution of galvanized steel was carried out in 0.5 M NaCl solution to obtain the Fe-Zn alloy layer on the base steel. The alloy layer was characterized to be composed of FeZn₁₃, FeZn₇ and Fe₃Zn₁₀ intermetallic phases, which constitute the zeta, delta1 and gamma layers of galvanized steel, respectively. It was observed that the alloy layer has similar cathodic polarization behavior but different anodic polarization behavior compared to galvanized steel. The anodic current plateau of alloy layer was up to 100 times lower than that of galvanized coating. Corrosion test performed in wet-dry cyclic condition has shown that the alloy layer has lower corrosion rate as compared to galvanized steel. From the results of corrosion test of alloy layer and base steel, it was concluded that Zn²⁺ has positive effect on the protectiveness of the zinc corrosion products. The measurement of surface potential over the alloy/steel galvanic couple has confirmed the galvanic ability of alloy layer to protect both the alloy layer itself and the base iron during initial stage of atmospheric corrosion.     

Optics clustered to output unique solutions: a multi-laser facility for combined single molecule and ensemble microscopy

Optics clustered to output unique solutions (OCTOPUS) is a microscopy platform that combines single molecule and ensemble imaging methodologies. A novel aspect of OCTOPUS is its laser excitation system, which consists of a central core of interlocked continuous wave and pulsed laser sources, launched into optical fibres and linked via laser combiners. Fibres are plugged into wall-mounted patch panels that reach microscopy end-stations in adjacent rooms. This allows multiple tailor-made combinations of laser colours and time characteristics to be shared by different end-stations minimising the need for laser duplications. This setup brings significant benefits in terms of cost effectiveness, ease of operation, and user safety. The modular nature of OCTOPUS also facilitates the addition of new techniques as required, allowing the use of existing lasers in new microscopes while retaining the ability to run the established parts of the facility. To date, techniques interlinked are multi-photon/multicolour confocal fluorescence lifetime imaging for several modalities of fluorescence resonance energy transfer (FRET) and time-resolved anisotropy, total internal reflection fluorescence, single molecule imaging of single pair FRET, single molecule fluorescence polarisation, particle tracking, and optical tweezers. Here, we use a well-studied system, the epidermal growth factor receptor network, to illustrate how OCTOPUS can aid in the investigation of complex biological phenomena.     

Phase Transitions on Fixed Connected Graphs and Random Graphs in the Presence of Noise

In this paper, we study the phase transition behavior emerging from the interactions among multiple agents in the presence of noise. We propose a simple discrete-time model in which a group of non-mobile agents form either a fixed connected graph or a random graph process, and each agent, taking bipolar value either +1 or -1, updates its value according to its previous value and the noisy measurements of the values of the agents connected to it. We present proofs for the occurrence of the following phase transition behavior: At a noise level higher than some threshold, the system generates symmetric behavior (vapor or melt of magnetization) or disagreement; whereas at a noise level lower than the threshold, the system exhibits spontaneous symmetry breaking (solid or magnetization) or consensus. The threshold is found analytically. The phase transition occurs for any dimension. Finally, we demonstrate the phase transition behavior and all analytic results using simulations. This result may be found useful in the study of the collective behavior of complex systems under communication constraints.     

CNFET Based Ultra-Low-Power Schmitt Trigger SRAM for Internet of Things (IoT) Applications

Wireless Personal Communications - This paper presents Carbon Nanotube FET (CNFET) based ultra-low-power Schmitt trigger SRAM designs which can operate at voltage levels as low as 200 mV, with high...     

Fuzzy and Deep Belief Network Based Malicious Vehicle Identification and Trust Recommendation Framework in VANETs

Wireless Personal Communications - This work aims to implement a clustering scheme to separate vehicles into a cluster that is based on various parameters, such as the total number of relay nodes,...     

CP2EH: a comprehensive privacy-preserving e-health scheme over cloud

The Journal of Supercomputing - In the Attribute-Based Encryption (ABE) scheme, patients encrypt their electronic health record (EHR), attach the appropriate attributes with it, and outsource them...     

Chemically deposited nickel oxide as counter electrode for dye sensitized solar cell

Nickel oxide (NiO) thin films have been synthesized by simple and inexpensive chemical bath deposition at low temperature. The synthesized thin films were annealed at 623 K and used for further characterization. Structural and morphological properties of the NiO thin film were characterized using X-ray diffraction and scanning electron microscope (SEM), respectively. The structural study shows the simple cubic formation of NiO thin films with average crystallite size of 9 nm. Honeycomb like surface morphology with porous structure was observed from the SEM study. NiO thin film electrode has been used as a counter electrode in dye sensitized solar cell. Finally, photovoltaic parameters such as short circuit current density (J_sc), open circuit voltage (V_oc), Fill Factor (FF) and efficiency (η) have been studied.