Role of choline formate ionic liquid in the polymerization of vinyl and methacrylic monomers

Polymerizations of vinyl and methacrylate monomers (2‐hydroxyethyl methacrylate, styrene, and methyl methacrylate) were carried out in a choline formate ionic liquid at room temperature without the addition of peroxide‐based initiators. Choline formate acted as both an initiator and a solvent and produced high‐molecular‐weight polymers. Gel permeation chromatography and electron paramagnetic resonance measurements indicated that the polymerizations predominantly occurred by a free‐radical mechanism. This method of polymerization provides an alternate route to eliminate the use of toxic initiators and solvents. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Studies on the engineering properties of LCP‐Vectra B 950/PP blends with the variations of EAA content

Polypropylene (PP) was melt blended with Vectra B‐950 [a thermotropic liquid crystalline polymer (LCP)], in a single screw extruder in presence of different doses of ethylene acrylic acid (EAA) copolymer, as modifier. The effect of incorporation in different proportions of EAA at a fixed dose of 5% LCP, on mechanical, thermal, morphological, and rheological properties of such blends was studied and the same were compared with that of pure PP and amongst themselves. Mechanical analysis (tensile properties) of the prepared blends exhibited improvements in ultimate tensile strength (UTS), modulus, toughness, hardness, and impact strength of PP matrix with the incorporation of EAA. The improvement in mechanical properties is associated with the formation of LCP fibrils as evidenced by scanning electron microscopy (SEM). A strong interaction through H‐bonding between the segments of Vectra B‐950 and EAA was established by FTIR study. Differential scanning calorimetry (DSC) studies indicated substantial increase in melting point of the blends, and thermogravimetric analysis (TGA) showed that the thermal stability of PP was improved with the addition of LCP and EAA. Rheological properties showed that LCP and EAA drop down the melt viscosity of PP and thus facilitate processibility of blends. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

A Three-Phase AC-to-DC Power Transistor Converter-Controlled DC Motor Drive

A three-phase ac-to-dc power transistor converter that is suitable for speed control of a dc motor and for a variable dc power supply is investigated. The availability of power transistors of fairly high power rating has made the task of ac-to-dc conversion relatively easy due to simplification of the converter circuit configuration. The external performance characteristics of the power transistor converter-controlled separately excited dc motor are obtained by employing the equal pulsewidth modulation (EPWM) control technique with 18 pulses per half-cycle of the supply voltage and are verified experimentally. There is good agreement between experimental and theoretical results. The external performance is also evaluated under constant torque operation. The use of inductance-capacitance (LC) filters for reducing the effect of predominant supply harmonics is briefly discussed. Experimental oscillograms of some typical waveforms are illustrated to verify the basic principles of operation.     

Sequential mixing as effective method in the reduction of percolation threshold of multiwall carbon nanotube in poly(methyl methacrylate)/high‐density poly(ethylene)/MWCNT nanocomposites

This work demonstrates sequential heating protocol to be an effective method in the reduction of percolation threshold of multiwall carbon nanotube (MWCNT) in (70/30 w/w) poly(methyl methacrylate) (PMMA)/high‐density poly(ethylene) (HDPE)/MWCNT nanocomposites. Here, the percolation threshold (P_c) value was reduced to 0.08 wt % of MWCNT, which is the lowest among the ever reported values of P_c for the PMMA system. Moreover, a co‐continuous morphology of the minor HDPE phase was evident throughout the major PMMA phase in a highly asymmetric composition (70/30 w/w) of the blend constituents. The AC conductivity as well as the dielectric permittivity values were increased with increase in loading of MWCNT in the nanocomposites. The detailed analysis of electrical and morphological properties is discussed in depth in the article. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40235.     

Green microalga Chlorella vulgaris as a potential feedstock for biodiesel

BACKGROUND: A major bottleneck in microalgal biodiesel production is lipid content, which is often low in microalgal species. The present study examines Chlorella vulgaris as a potential feedstock for biodiesel by identifying and evaluating the relationships between the critical variables that enhance the lipid yield, and characterizes the biodiesel produced for various properties. RESULTS: Factors affecting lipid accumulation in a green microalga, Chlorella vulgaris were examined. Multifactor optimization raised the lipid pool to 55% dry cell weight against 9% control. When C. vulgaris cells pre‐grown in glucose (0.7%)‐supplemented medium were transferred to the optimized condition at the second stage, the lipid yield was boosted to 1974 mg L^?1, a value almost 20‐fold higher than for the control. The transesterified C. vulgaris oil showed the presence of ～82% saturated fatty acids, with palmitate and stearate as major components, thus highlighting the oxidative stability of C. vulgaris biodiesel. The fuel properties (density, viscosity, acid value, iodine value, calorific value, cetane index, ash and water contents) are comparable with the international (ASTM and EN) and Indian (IS) biodiesel standards. CONCLUSION: C. vulgaris biomass with 55% lipid content and adequate fuel properties is potentially a renewable feedstock for biodiesel. Copyright © 2011 Society of Chemical Industry     

Time‐dependent dosing of Fe2+ for improved lipopeptide production by marine Bacillus megaterium

BACKGROUND: Lipopeptide production is strongly influenced by trace metals. The availability of free Fe²⁺ in the media throughout the process of fermentation was found to be very critical. Since free Fe²⁺ was reported to be sequestered by the lipopeptide as it was produced, intermittent feeding of Fe²⁺ was strategized and optimized for enhanced lipopeptide production by marine Bacillus megaterium in glucose mineral salts medium (GMSM). RESULTS: Studies with the single‐dose Fe²⁺ (0.48 mmol L^?1) supplementation after 8 h of fermentation resulted in lipopeptide concentration of 3.3 ± 0.1 g L^?1. Lipopeptide production was further enhanced to 4.2 ± 0.15 g L^?1 by adopting a multi‐dose Fe²⁺ feeding strategy. The maximum product yield (Y_P/S) of 0.24 ± 0.02 g g^?1 with specific product formation rate (q_p) of 0.124 ± 0.01 g g^?1 h^?1 was achieved when 0.48 mmol L^?1 Fe²⁺ was fed intermittently at different times as per the designed strategy. CONCLUSION: Lipopeptide concentration was improved 4.7‐fold by single‐dosing and 5.8‐fold by multiple dosing of Fe²⁺, when compared with GMSM without Fe²⁺ supplementation. Copyright © 2012 Society of Chemical Industry     

Optical properties of ZnS nanoparticles produced by mechanochemical method

Nanosized zinc sulfide (ZnS) has been synthesized by the mechanochemical route using zinc acetate and sodium sulfide as source materials in a high energy planetary ball mill (HEPBM) with 300 rpm for 2 h. The mechanochemically synthesized powders have been analyzed by X-ray diffraction (XRD) for phase analysis, Field Emission Scanning Electron Microscope (FESEM) for the morphological characterization, UV–vis–NIR spectrophotometer for determining band gap energy and Fluorescence spectroscopy for determining the emission wavelength. The crystallite size of the synthesized ZnS nanoparticles calculated by the Debye–Scherer's formula is in the range 7–9 nm. FESEM morphology shows the fibrous structure of ZnS samples. The value of optical band gap has been found to be in the range 5.2–5.3 eV. Room temperature photoluminescence (PL) spectrum of the samples exhibits a blue light emission using UV excitation wavelength of 280 nm.     

Non-catalytic vanadium removal from vanadyl etioporphyrin (VO-EP) using a mixed solvent of supercritical water and toluene: A kinetic study

Reaction kinetics and mechanisms of the decomposition of vanadyl etioporphyrin (VO-EP), the most common metal compounds present in heavy crude, were studied in a mixed solvent of supercritical water (SCW) and toluene without the addition of any catalyst, H₂ or H₂S to remove vanadium. The aim of this study was to remove vanadium an environmentally benign way from VO-EP at a high extent and in a short reaction time. The experiments were conducted in an 8.8 mL batch reactor fabricated from Hastelloy C-276. The capability of SCW to remove vanadium from VO-EP was discovered at temperatures of 410–490 °C and a water partial pressure (WPP) of 25 MPa. Experimental results revealed that the overall VO-EP conversion was 90.51% at a temperature of 490 °C, WPP of 25 MPa and reaction time of 180 min. Under the same reaction conditions, approximately 80.26% vanadium was removed by reaction with SCW. The global reaction followed first order kinetics, with Arrhenius parameters of activation energy 8.93 kcal/mol and a pre-exponential factor 5.66 s^?1. A kinetic model of demetallation that well-fit the experimental results, was proposed. The reaction kinetics may be critically explained in terms of free radical mechanism. The obtained results suggest that SCW is capable of removing vanadium from VO-EP.     

Anomalous electrical transport properties of PVA–Ag composite films below room temperature

The direct current (dc) and alternate current (ac) electrical transport property of polyvinyl alcohol–silver (PVA–Ag) composites has been investigated within a temperature range of 77 ≤ T ≤ 300 K and in the frequency range of 20 Hz to 1 MHz in the presence as well as in the absence of a transverse magnetic field up to 1 T. The dc conductivity follows variable range hopping model. The magnetoconductivity of the samples undergoes a change from negative to positive values with the incorporation of Ag in PVA matrix, which can be interpreted by the dominancy of the forward interference effect prevailing over the wave function shrinkage effect. The ac conductivity follows a power law of frequency, whereas the temperature dependence of frequency exponent “s” can be explained by correlated barrier hopping model. The dielectric behavior of the samples has been governed by the grain and interfacial grain boundary resistance and capacitance. Two activation behaviors are observed from the analysis of grain and interfacial grain boundary contributions. POLYM. COMPOS., 33:1941–1950, 2012. © 2012 Society of Plastics Engineers