The role of nanoclay partitioning and fibril formation on dyeability of blend nanocomposite fibres

The aim of the present work was to study the effect of microstructure and microfibril formation on dyeability of polypropylene/poly(butylene terephthalate)/organoclay blend nanocomposite fibres. The blend nanocomposite samples with the same blend ratio but varying in organoclay content were prepared via melt compounding by using a co‐rotating twin screw extruder. The microfibrillar morphology and nanoclay partitioning were studied using scanning electron microscopy and transmission electron microscopy together with rheological results. The presence of nanoclay in the form of tactoids in the polypropylene matrix accelerated the dye sorption but much greater ultimate dye uptake could be achieved for the sample in which the major part of the platelets were preferentially located inside the poly(butylene terephthalate) fibrils. Although increasing the organoclay concentration increased the ultimate dye uptake, it limited the fibril formation at higher organoclay concentration. The utilisation of a compatibiliser was found to have an enhancing effect on ultimate dye uptake. This could be explained in terms of the interfacial role of the compatibiliser in improving microfibril formation as well as partitioning a fraction of nanoclay platelets inside the polypropylene matrix.     

Fixed‐Bed Multi‐Tubular Reactors for Oxidative Dehydrogenation in Ethylene Process

An industrial‐scale reactor for ethylene production was modeled using the oxidative dehydrogenation of ethane (ODHE) in a multi‐tubular reactor system, examining a variety of parameters affecting reactor performance. The model showed that a double‐bed multi‐tubular reactor with intermediate air injection scheme was superior to a single‐bed design, due to the increased ethylene selectivity while operating under lower oxygen partial pressures. The optimized reactor length for 100 % oxygen conversion was theoretically determined for both reactor designs. The use of a distributed oxygen feed with a limited number of injection points indicated a significant improvement on the reactor performance in terms of ethane conversion and ethylene selectivity. This concept also overcame the reactor runaway temperature problem and enabled operations over a wider range of conditions to obtain enhanced ethylene production.     

Thermal,mechanical and acoustic damping properties of flexible open‐cell polyurethane/multi‐walled carbon nanotube foams: effect of surface functionality of nanotubes

This article demonstrates the properties of open‐cell flexible polyurethane foams incorporating multi‐walled carbon nanotubes. Three different types of highly functionalized nanotubes having carboxyl, hydroxyl and amide functional groups were synthesized. Neat polyurethane foam and three nanocomposite foams filled with 0.1 wt% of treated nanotubes were prepared. It was found that thermal stability, mechanical properties and acoustic damping were improved significantly by incorporation of small amounts of nanotubes. The nanotubes modified with carboxyl groups were found to have much more influence compared to the other two functional groups, possibly due to better interfacial interaction and improved dispersion. Scanning electron microscopy revealed micro‐cells with average diameters less than 5 µm in the skeleton of foams filled with nanotubes modified with hydroxyl and carboxyl, the formation of which was attributed to the generation of gaseous materials through the reaction with isocyanate. Such micro‐cells were found to be influential in improving mechanical and acoustic damping. Copyright © 2010 Society of Chemical Industry     

Surface modification of silica-graphene nanohybrid as a novel stabilizer for oil-water emulsion

The surface modification of silica-graphene nanohybrid through treatment with a mixture of nitric and sulfuric acid vapors to prepare a novel stabilizer for decalin-water emulsion was investigated. The nanohybrid was prepared through chemical vapor deposition using silica aerogel and acetylene as catalyst and carbon precursor at atmospheric pressure and 600 °C. The physicochemical properties of the modified nanohybrid were characterized by FT-IR, XPS, Raman spectroscopy, and TEM. The surface modification of nanohybrid was at various duration times (24, 48, and 72 hours) to optimize the surface modification conditions. Zeta potential of ?39.9 mV revealed that the surface modification of nanohybrid after 72 hours had an excellent stability in aqueous phase due to the presence of exceptional functional groups. The emulsion average droplet size decreased by increasing the nanohybrid concentration. The negative value of the zeta potential showed the proposed nanohybrid can be applied as an appropriate stabilizer for emulsion.     

Numerical Prediction of Temperature Profile during Gas Lifting

Abstract

Because locating the best valve position in the annulus and predicting the optimum injection gas volume, among other factors, depends on the temperature profile, an accurate knowledge of the operating temperature is desirable. This study examines the Joule-Thompson effect and changing fluid properties through the tubing in related equations and presents the temperature profile inside the tubing and annulus.     

Relationship between dye sorption and morphology in polypropylene/poly (butylene terephthalate) microfibrillar blend nanocomposite fibers

In this research work, the relation between microstructural enhancement and dyeing behavior of immiscible blend nanocomposite fibers was investigated using scanning electron microscopy, transmission electron microscopy, X-ray diffraction patterns, and rheometric mechanical spectrometer along with quantitative analysis of dye sorption. A novel microfibrillar morphology blend fiber, in which poly (butylene terephthalate) nanocomposite fibrils uniformly distributed in the cross section of polypropylene matrix, was successfully developed using melt compounding process. Preferred location of nanoclay had improving effect on poly (butylene terephthalate) fibril formation such that there was an organoclay concentration above that fiber with fine microfibrillar morphology could hardly be produced. It was demonstrated that nanoclay melt intercalation and partitioning controlled the activation energy of dyeing. The maximum sorption rate was achieved by utilizing compatibilizer to transfer part of nanoclay platelets into the polypropylene matrix.     

Mathematical modeling of onset of convection in a porous layer with viscosity variation

IntroduthenIn a novel EOR (Enhanced Oil Recovery) method,diffusion-convechon may be employed as a drive toforce heavy, viscous oil to move. A ~ of gas isexpanded beneath oil, and gas is allowed tO diffuseupward. As oil dissolves gas, it becomes lighter.Therefore, an inverse density gradient is develOPed in oillayer gradually. When this density gradient exceeds acritical value, convechon is started. It may be concjudedthat develOPing a theory, which predictS the onset ofconvection, should…     

Numerical study of forced convective heat transfer of Nanofluids: Comparison of different approaches

Forced convective of a nanofluid that consists of water and Al₂O₃ in horizontal tubes has been studied numerically. Computed results were validated with existing well established correlation. Two-phase Eulerian model has been implemented for the first time to study such a flow field. A single-phase model and two-phase mixture model formulations were also used for comparison. The comparison of calculated results with experimental values shows that the mixture model is more precise. It is illustrated that the single-phase model and the two-phase Eulerian model underestimates the Nusselt number. Effects of nanoparticles concentration on the thermal parameters are also discussed.