In Situ Hydroxyapatite Synthesis Enhances Biocompatibility of PVA/HA Hydrogels

Bone tissue engineering tries to simulate natural behavior of hard tissues. This study aimed to produce scaffolds based on polyvinyl alcohol (PVA) and hyaluronic acid (HA) with hydroxyapatite (HAp) incorporated in two different ways, by in situ synthesis and physical mixing of pre-prepared HAp. In situ synthesis resulted in calcium deficient form of HAp with lower crystallinity. The proliferation of human osteoblast-like cells MG-63 proved to be better in the scaffolds with in situ synthesized HAp compared to those with physically mixed pre-prepared HAp. For scaffolds with PVA/HA/HAp ratio 3:1:2, there was significantly higher initial adhesion (p = 0.0440), as well as the proliferation in the following days (p < 0.001). It seemed to be advantageous improve the properties of the scaffold by in situ synthesizing of HAp directly in the organic matrix.     

Temporal trends of synthetic musk compounds in mother's milk and associations with personal use of perfumed products

We analyzed two nitro musks (musk xylene and musk ketone) and five polycyclic musks (HHCB, AHTN, ADBI, ATII, and AHDI) in mother's milk from primiparae women (N = 101) living in Uppsala County, Sweden, 1996-2003. Possible temporal trends in musk concentrations and associations with lifestyle/medical factors, such as use of perfumed products during pregnancy were studied. HHCB showed the highest median concentration (63.9 ng/g lipid) followed by AHTN (10.4 ng/g) and musk xylene (MX) (9.5 ng/g). Concentrations of the other substances were, in most cases, below the quantification limit (2.0-3.0 ng/g). Women with a high use of perfume during pregnancy had elevated milk concentrations of HHCB, and elevated concentrations of AHTN were observed among women reporting use of perfumed laundry detergent. This strongly suggests that perfumed products are important sources of musk exposure both among the mothers and the nursed infants. Concentrations of AHTN and MX declined significantly between 1996 and 2003, suggesting a decline in the industrial use of the compounds in consumer products, or alterations in the consumer use pattern of perfumed products. No temporal trend in HHCB concentrations was seen. The lack of toxicity data makes it difficult to generalize about the safety of musk exposure of breast-fed infants.     

Serum concentrations of neutral and phenolic organohalogens in pregnant women and some of their infants in The Netherlands

As part of a large European Union (EU)-funded comparative toxicology and human epidemiology study, EU-Compare, a selection of organohalogen compounds (OHCs) was analyzed in maternal serum, collected at the 35th week of pregnancy, and in cord serum of a number of their infants to determine maternal concentrations and to investigate the extent of transplacental transfer of these compounds. Eight neutral OHCs were analyzed: one polychlorinated biphenyl (PCB: CB-153),4,4'-DDE, five polybrominated diphenyl ethers (PBDEs: BDE-47, BDE-99, BDE-100, BDE-153, and BDE-154), and hexabromocyclododecane (HBCDD). Five phenolic OHCs were analyzed: three hydroxylated PCBs (40H-CB-107, 40H-CB-146, and 40H-CB-187), one hydroxylated PBDE (60H-BDE-47), and pentachlorophenol (PCP). All OHCs, except 60H-BDE-47, were present in maternal and cord serum. The historically identified OHCs showed the highest concentration: 4,4'-DDE (median value 89 ng/g lipid in maternal serum and 68 ng/g lipid in cord serum) and PCP (median value 970 pg/g serum in maternal serum and 1500 pg/g serum in cord serum). HBCDD and the PBDEs were present at much lower concentrations. We conclude that OHCs are present in the serum of pregnant women, and all compounds tested are transferred over the placenta. Because transfer is occurring at a critical stage of infant development, investigation of the health impact is urgent.     

Thermoelastic study of a functionally graded annular fin with variable thermal parameters using semiexact solution

Abstract

In this paper, the thermoelastic behavior of a functionally graded material (FGM) annular fin is investigated. The material properties of the annular fin are assumed to vary radially. The heat transfer coefficient and internal heat generation are considered to be functions of temperature. A closed form solution of nonlinear heat transfer equation for the FGM fin is obtained using the homotopy perturbation method (HPM) which leads to nonuniform temperature distributions within the fin. The temperature field is then coupled with the classical theory of elasticity and the associated thermal stresses are derived analytically. For the correctness of the present closed form solution for the stress field, the results are compared with the ANSYS-based finite element method (FEM) solution. The present HPM-based closed form solution of the stress field exhibits a good agreement with the FEM results. The effect of various thermal parameters such as the thermogeometric parameter, conduction-radiation parameter, internal heat generation parameter, coefficient of variation of thermal conductivity, and the coefficient of thermal expansion on the thermal stresses are discussed. The results are presented in both nondimensional and dimensional form. The dimensional stress analysis discloses the suitability of FGM as the fin material in practical applications.     

Aroma profiles of five basil (Ocimum basilicum L.) cultivars grown under conventional and organic conditions

A headspace solid-phase microextraction (HS-SPME) method coupled to gas chromatography–ion trap mass spectrometry (GC–ITMS) has been developed and applied for profiling of volatile compounds released from five Ocimum basilicum L. cultivars grown under both organic and conventional conditions. Comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC×GC–TOFMS) was employed for confirmation of identity of volatiles extracted from the basil headspace by SPME.     

Groundwater-surface water interactions and agricultural nutrient transport in a Great Lakes clay plain system

Nutrient export from agricultural land to surface waters is a significant environmental concern within the Great Lakes Basin (GLB). A field-based watershed-scale study was completed to investigate spatial and temporal variations of phosphorus and nitrate to assess nutrient transport pathways and groundwater-surface water interactions in an agriculturally dominated clay plain system. This was conducted in the 127 km² Upper Parkhill Watershed, near Lake Huron in southwestern Ontario, Canada. Data collection occurred from June 2018 to May 2019 via continuous sensor deployment and discrete sampling of stream water, groundwater, hyporheic zone, and tile drainage water. Samples were analyzed for various nutrient species (total, total dissolved, soluble reactive, and particulate phosphorus, and nitrate-N) to examine the hydrological dynamics of principal transport pathways of agriculturally-derived nutrients. Total phosphorus and nitrate concentrations in stream water ranged from 0.007 to 0.324 mg/L and 0.32 to 13.13 mg NO₃^?-N/L, respectively. Tile drainage water total phosphorous concentrations varied from 0.006 to 0.066 mg/L. Groundwater total dissolved phosphorus concentrations ranged from <0.003 to 0.085 mg/L. Transport of phosphorus through tile drainage was observed to be greater than through groundwater over the study period. No distinct relationship was observed between nutrient concentrations in the hyporheic zone and the vertical hydraulic gradient within this zone in the studied stream reach. Preliminary correlations were discerned between water quality observations and recognized land management practices. Given the elevated stream nutrient concentrations, these results are consequential for the continual improvement of strategies and programs devised to conserve water resources within the GLB.     

Schnellmethode zur Bestimmung des ?lanteils in Lecithin

Zusammenfassung Eine Schnellmethode zur routinemäßigen Bestimmung des Ölanteils in Handelsleeithin und ähnlichen Phospholipidproben wurde ausgearbeitet. Sie beruht auf der Beobachtung, dam 1 g Phospholipid an 45 g mit Wasser desaktiviertem Kieselgel unter den Versuchsbedingungen vollständig adsorbiert werden.Die Lecithinprobe wird in ätherischer Lösung durch eine mit desaktiviertem Kieselgel gefüllte Säule filtriert und mit etwas Äther nacheluiert. Das gesamte Äther-Eluat wird i. Vak. eingedampft und der Rückstand gewogen. Dieser Rückstand entspricht dem Ölanteil, der aus Mono-, Di- und Triglyceriden, freien Fettsäuren, Sterinen und deren Derivaten besteht. Eine Bestimmung dauert etwa 20 min.

---

A rapid method for determination of oil in lecithins

Summary A rapid method for routine determination of oil in commercial lecithins and similar phospholipid samples has been worked out. This based on the observation that under the described experimental conditions 1 g of phospholipids is completely adsorbed on 45 g silica gel which has previously been disactivated by the addition of 15% water.The lecithin sample is filtered in ethereal solution through a column filled with disactivated silica gel which is subsequently washed with a little ether. The combined ether eluates are evaporated to drynessin vacuo and the residue weighed. This residue is the oil part of the sample and is constituted of mono-, di-, and triglycerides, free fatty acids, sterols and their derivatives. The duration for one such determination is about 20 min.

---

---

Vorgetragen anläßlich des 11. ISF-Kongresses in Göteborg, Juni 1972.     

Hygrothermal effects on properties of highly conductive epoxy/graphite composites for applications as bipolar plates

The hygrothermal effects on mechanical, thermal, and electrical properties of highly conductive graphite-based epoxy composites were investigated. The highly conductive graphite-based epoxy composites were found to be suitable for applications as bipolar plates in proton exchange membrane (PEM) fuel cells. The hygrothermal aging experiments were designed to simulate the service conditions in PEM fuel cells. Specifically, the composite specimens were immersed in boiling water, aqueous sulphuric acid solution, and aqueous solution of hydrogen peroxide. The water uptake, changes in surface appearance and dimensions, glass transition behavior and thermal stability, and electrical and mechanical properties were evaluated. The water uptake at short time increased linearly with the square root of time as in linear Fickian diffusion. The presence of graphite significantly reduced both the rate and extent of water uptake. No discernible changes in specimen dimensions, surface appearance, and morphology of the composites were observed. The electrical conductivity and mechanical properties remained almost unchanged. The wet specimens showed slight reduction of glass transition temperature (T_g) due to plasticization of epoxy networks by absorbed water, while the re-dried specimens showed small increase of T_g. The composites maintained high electrical conductivity of about 300–500 S cm⁻¹ and good mechanical properties and showed thermal stability up to 350 °C.     

Chlorinated phenols in human milk

The paper deals with the contamination of human milk with chlorinated phenols. The average and median concentrations of the chlorophenols investigated ranged from 0.75 to 9.74 g.kg^–1 and from being not detectable to 5.62 g.kg^–1, respectively, for the different compounds. The highest average and median levels were found for pentachlorophenol and 2,4,5-trichlorophenol. The concentrations determined were below the permissible levels.