Community response to environmental noise and the impact on cardiovascular risk score

Objective

The objective of our study was to investigate and evaluate the relationship between road traffic noise and cardiovascular risk.

Methods

The study sample (n = 659; 36.9% male, 63.1% female university students, mean age 22.83 ± 1.58 years) included a group exposed to road traffic noise (n = 280, L_eq,24 h = 67 ± 2 dB(A)) and a control group (n = 379, L_eq,24 h = 58.7 ± 6 dB(A)). Subjective response was determined by a validated noise annoyance questionnaire. The ten year risk of developing a coronary heart disease event was quantified as an evaluation of cardiovascular risk (SCORE60, Framingham 10-year risk estimation and projection to the age of 60, relative risk SCORE chart).

Results

Cardiovascular risk scores were significantly higher in the exposed group based on the Framingham scores projected to the age of 60, SCORE60 (AOR = 2.72 (95% CI = 1.21-6.15)) and the relative risk SCORE chart (AOR = 2.81 (1.46-5.41)).

Conclusions

These findings highlight the association between road traffic noise and cardiovascular risk.     

High-Rate Uncorrelated Bit Extraction for Shared Secret Key Generation from Channel Measurements

Secret keys can be generated and shared between two wireless nodes by measuring and encoding radio channel characteristics without ever revealing the secret key to an eavesdropper at a third location. This paper addresses bit extraction, i.e., the extraction of secret key bits from noisy radio channel measurements at two nodes such that the two secret keys reliably agree. Problems include 1) nonsimultaneous directional measurements, 2) correlated bit streams, and 3) low bit rate of secret key generation. This paper introduces high-rate uncorrelated bit extraction (HRUBE), a framework for interpolating, transforming for decorrelation, and encoding channel measurements using a multibit adaptive quantization scheme which allows multiple bits per component. We present an analysis of the probability of bit disagreement in generated secret keys, and we use experimental data to demonstrate the HRUBE scheme and to quantify its experimental performance. As two examples, the implemented HRUBE system can achieve 22 bits per second at a bit disagreement rate of 2.2 percent, or 10 bits per second at a bit disagreement rate of 0.54 percent.     

Combined exposure to cyanobacterial biomass, lead and the Newcastle virus enhances avian toxicity

Under environmental conditions, wild birds can be exposed to multiple stressors including natural toxins, anthropogenic pollutants and infectious agents at the same time.This experimental study was successful in testing the hypothesis that adverse effects of cyanotoxins, heavy metals and a non-pathogenic immunological challenge combine to enhance avian toxicity. Mortality occurred in combined exposures to naturally occurring cyanobacterial biomass and lead shots, lead shots and Newcastle vaccination as well as in single lead shot exposure. Mostly acute effects around day 10 were observed. On day 30 of exposure, there were no differences in the liver accumulation of lead in single and combined exposure groups. Interestingly, liver microcystin levels were elevated in birds co-exposed to cyanobacterial biomass together with lead or lead and the Newcastle virus. Significant differences in body weights between all Pb-exposed and Pb-non-exposed birds were found on days 10 and 20. Single exposure to cyanobacterial biomass resulted in hepatic vacuolar dystrophy, whereas co-exposure with lead led to more severe granular dystrophy. Haematological changes were associated with lead exposure, in particular. Biochemical analysis revealed a decrease in glucose and an increase in lactate dehydrogenase in single and combined cyanobacterial and lead exposures, which also showed a decreased antibody response to vaccination.The combined exposure of experimental birds to sub-lethal doses of individual stressors is ecologically realistic. It brings together new pieces of knowledge on avian health. In light of this study, investigators of wild bird die-offs should be circumspect when evaluating findings of low concentrations of contaminants that would not result in mortality on a separate basis. As such it has implications for wildlife biologists, veterinarians and conservationists of avian biodiversity.     

Microwave sintering of fine grained HAP and HAP/TCP bioceramics

The effect of microwave sintering conditions on the microstructure, phase composition and mechanical properties of materials based on hydroxyapatite (HAP) and tricalcium phosphate (TCP) was investigated. Fine grained monophase HAP and biphasic HAP/TCP biomaterials were processed starting from stoichiometric and calcium deficient nanosized HAP powders. The HAP samples microwave (MW) sintered for 15 min at 900 °C, with average grain size of 130 nm, showed better densification, higher density and certainly higher hardness and fracture toughness than samples conventionally sintered for 2 h at the same temperature. By comparing MW sintered HAP and HAP/TCP samples, it was concluded that pure HAP ceramics have superior mechanical properties. For monophase MW sintered HAP samples, the decrease in the grain size from 1.59 μm to 130 nm led to an increase in the fracture toughness from 0.85 MPa m^1/2 to 1.3 MPa m^1/2.     

Modeling gas absorption accompanied by chemical reaction in bubble column and foam-bed slurry reactors

The published data in the literature and the reported models on foam-bed reactors have been reanalyzed. It is observed that the models have been developed assuming negligible conversion in the storage section although the storage constitutes 65–85% of the total volume of liquid/slurry charged into the reactor. For confirmation of the reported information, in the present work, experiments have been performed in foam-bed and bubble column slurry reactors for carbonation of hydrated lime slurry using carbon-dioxide gas under identical conditions. A comparison of the relative performances of the two reactors has been made. Storage section is found to be the main section governing the performance of the foam-bed slurry reactor. New mathematical models have been developed for both the reactors. The model predictions agree well with the experimental data.     

Furanocoumarins in vegetables: influence of farming system and other factors on levels of toxicants

Furanocoumarins are toxic chemicals that occur naturally in edible food plants such as celery, parsnip, carrot, etc. belonging to the Apiaceae family. Lower levels of these phytochemicals are also found in citrus fruits and other crops representing the Rutaceae family. Since their presence in the human diet represents a food safety issue of concern, more knowledge is needed to reduce consumer exposure. This paper provides an overview of various factors influencing the levels of furanocoumarins in vegetables and processed commodities. Special attention is paid to the comparison of crops from organic and conventional farming systems with regard to levels of furanocoumarins and their changes during storage and processing. Copyright © 2007 Society of Chemical Industry     

Titania supported Co-Mn-Al oxide catalysts in total oxidation of ethanol

Catalytic activity of the Co-Mn-Al mixed oxide catalysts (Co:Mn:Al molar ratio of 4:1:1) supported over titania was examined in total oxidation of ethanol. The prepared catalysts were characterized by chemical analysis (AAS), surface area measurements, and temperature programmed techniques (TPR, TPD). In ethanol oxidation, the catalysts activity gradually increased with increasing active phase content. Low concentration of Co-Mn-Al oxides in the catalyst negatively affected formation of reaction byproducts: carbon monoxide production steeply increased when Co + Mn metals concentration were lower than 5 wt.%. On the other hand, formation of the second main reaction intermediate, acetaldehyde was limited, when acidity of the catalyst was not high, i.e. concentration of Co-Mn metals over titania was low.     

Optical and electrical transport properties of polyaniline–silver nanocomposite

Polyaniline–silver nanocomposite has been synthesized successfully by the chemical oxidative polymerization of aniline with ammonium peroxydisulphate as an initiator in presence of negatively charged silver nanoparticles. Silver nanoparticles are prepared by standard citrate reduction method. TEM, SEM, XRD, FTIR, TGA, DSC, optical absorption and photoluminescence studies are done for the morphological, structural, thermal and optical characterization of the polyaniline nanocomposite. From the TEM and SEM image, it is observed that nanoparticles are well dispersed in the polyaniline matrix. XRD pattern shows that polyaniline is amorphous, but peaks present in XRD pattern in polymer nanocomposites are for silver nanoparticles. TGA and DSC results show that polyaniline silver nanocomposite is more crystalline and more thermally stable. A surface plasmon absorption band is obtained from the optical absorption at 380 nm, which indicates that silver nanoparticles are present in the polyaniline matrix. The optical band gap of nanocomposite decreases with increasing content of silver nanoparticles. An enhancement in photoluminescence has been observed in polyaniline–silver nanocomposite than that in pure polyaniline. The electrical conductivity of polyaniline–silver nanocomposite increases with increase in silver nanoparticle content than that of pure polyaniline. This is a simple way by which optical and electrical properties of polyaniline may be enhanced by doping with suitable nanoparticles.