Heat Shock Alters the Proteomic Profile of Equine Mesenchymal Stem Cells

The aim of this research was to determine the impact of heat stress on cell differentiation in an equine mesenchymal stem cell model (EMSC) through the application of heat stress to primary EMSCs as they progressed through the cell specialization process. A proteomic analysis was performed using mass spectrometry to compare relative protein abundances among the proteomes of three cell types: progenitor EMSCs and differentiated osteoblasts and adipocytes, maintained at 37 °C and 42 °C during the process of cell differentiation. A cell-type and temperature-specific response to heat stress was observed, and many of the specific differentially expressed proteins were involved in cell-signaling pathways such as Notch and Wnt signaling, which are known to regulate cellular development. Furthermore, cytoskeletal proteins profilin, DSTN, SPECC1, and DAAM2 showed increased protein levels in osteoblasts differentiated at 42 °C as compared with 37 °C, and these cells, while they appeared to accumulate calcium, did not organize into a whorl agglomerate as is typically seen at physiological temperatures. This altered proteome composition observed suggests that heat stress could have long-term impacts on cellular development. We propose that this in vitro stem cell culture model of cell differentiation is useful for investigating molecular mechanisms that impact cell development in response to stressors.     

Synthetic applications of nonmetal catalysts for homogeneous oxidations

Nonmetal oxidation catalysts have gained much attention in recent years. The reason for this surge in activity is 2-fold: On one hand, a number of such catalysts has become readily accessible; on the other hand, such catalysts are quite resistant toward self-oxidation and compatible under aerobic and aqueous reaction conditions. In this review, we have focused on five nonmetal catalytic systems which have attained prominence in the oxidation field in view of their efficacy and their potential for future development; stoichiometric cases have been mentioned to provide overview and scope. Such nonmetal oxidation catalysts include the alpha-halo carbonyl compounds 1, ketones 2, imines 3, iminium salts 4, and nitroxyl radicals 5. In combination with a suitable oxygen source (H2O2, KHSO5, NaOCl), these catalysts serve as precursors to the corresponding oxidants, namely, the perhydrates I, dioxiranes II, oxaziridines III, oxaziridinium ions IV, and finally oxoammonium ions V. A few of the salient features about these nonmetal, catalytic systems shall be reiterated in this summary. The first class entails the alpha-halo ketones, which catalyze the oxidation of a variety of organic substrates [figure: see text] by hydrogen peroxide as the oxygen source. The perhydrates I, formed in situ by the addition of hydrogen peroxide to the alpha-halo ketones, are quite strong electrophilic oxidants and expectedly transfer an oxygen atom to diverse nucleophilic acceptors. Thus, alpha-halo ketones have been successfully employed for catalytic epoxidation, heteroatom (S, N) oxidation, and arene oxidation. Although high diastereoselectivities have been achieved by these nonmetal catalysts, no enantioselective epoxidation and sulfoxidation have so far been reported. Consequently, it is anticipated that catalytic oxidations by perhydrates hold promise for further development, especially, and should ways be found to transfer the oxygen atom enantioselectively. The second class, namely, the dioxiranes, has been extensively used during the last two decades as a convenient oxidant in organic synthesis. These powerful and versatile oxidizing agents are readily available from the appropriate ketones by their treatment [figure: see text] with potassium monoperoxysulfate. The oxidations may be performed either under stoichiometric or catalytic conditions; the latter mode of operation is featured in this review. In this case, a variety of structurally diverse ketones have been shown to catalyze the dioxirane-mediated epoxidation of alkenes by monoperoxysulfate as the oxygen source. By employing chiral ketones, highly enantioselective (up to 99% ee) epoxidations have been developed, of which the sugar-based ketones are so far the most effective. Reports on catalytic oxidations by dioxiranes other than epoxidations are scarce; nevertheless, fructose-derived ketones have been successfully employed as catalysts for the enantioselective CH oxidation in vic diols to afford the corresponding optically active alpha-hydroxy ketones. To date, no catalytic asymmetric sulfoxidations by dioxiranes appear to have been documented in the literature, an area of catalytic dioxirane chemistry that merits attention. A third class is the imines; their reaction with hydrogen peroxide or monoperoxysulfate affords oxaziridines. These relatively weak electrophilic oxidants only manage to oxidize electron-rich substrates such as enolates, silyl enol ethers, sulfides, selenides, and amines; however, the epoxidation of alkenes has been achieved with activated oxaziridines produced from perfluorinated imines. Most of the oxidations by in-situ-generated oxaziridines have been performed stoichiometrically, with the exception of sulfoxidations. When chiral imines are used as catalysts, optically active sulfoxides are obtained in good ee values, a catalytic asymmetric oxidation by oxaziridines that merits further exploration. The fourth class is made up by the iminium ions, which with monoperoxysulfate lead to the corresponding oxaziridinium ions, structurally similar to the above oxaziridine oxidants except they possess a much more strongly electrophilic oxygen atom due to the positively charged ammonium functionality. Thus, oxaziridinium ions effectively execute besides sulfoxidation and amine oxidation the epoxidation of alkenes under catalytic conditions. As expected, chiral iminium salts catalyze asymmetric epoxidations; however, only moderate enantioselectivities have been obtained so far. Although asymmetric sulfoxidation has been achieved by using stoichiometric amounts of isolated optically active oxaziridinium salts, iminium-ion-catalyzed asymmetric sulf-oxidations have not been reported to date, which offers attractive opportunities for further work. The fifth and final class of nonmetal catalysts concerns the stable nitroxyl-radical derivatives such as TEMPO, which react with the common oxidizing agents (sodium hypochlorite, monoperoxysulfate, peracids) to generate oxoammonium ions. The latter are strong oxidants that chemoselectively and efficiently perform the CH oxidation in alcohols to produce carbonyl compounds rather than engage in the transfer of their oxygen atom to the substrate. Consequently, oxoammonium ions behave quite distinctly compared to the previous four classes of oxidants in that their catalytic activity entails formally a dehydrogenation, one of the few effective nonmetal-based catalytic transformations of alcohols to carbonyl products. Since less than 1 mol% of nitroxyl radical is required to catalyze the alcohol oxidation by the inexpensive sodium hypochlorite as primary oxidant under mild reaction conditions, this catalytic process holds much promise for future practical applications.     

Isolation and structure elucidation of phenolic compounds from Cyclopia subternata Vogel (honeybush) intact plant and in vitro cultures

In the presented work, an insight was made into the polyphenolic composition of intact plant material and in vitro cultures of indigenous South African plant Cyclopia subternata Vogel (honeybush). Ethyl acetate fractions of methanol extracts were separated by means of gravity column chromatography and/or semipreparative HPLC on two serially connected monolithic RP-18 columns. The structures of the isolated compounds were determined by means of 1D and 2D NMR techniques and additionally confirmed by LC-DAD-ESI-MS. Apart from the previously described honeybush components, that is mangiferin (1), scolymoside (2), hesperidin (3) and narirutin (4), three additional compounds: iriflophenone 3-C-β-glucoside (benzophenone) (5), phloretin 3′,5′-di-C-β-glucoside (dihydrochalcone) (6), and isorhoifolin (flavone) (7) were identified for the first time in the herb of C. subternata. Additionally, three isoflavone glucosides, namely calycosin 7-O-β-glucoside (8), rothindin (9) and ononin (10), which had not been previously reported in Cyclopia plants, were identified in the callus of the above species. As far as the authors are concerned, this is the first report on the presence of benzophenone and dihydrochalcone derivatives in Cyclopia genus.     

Transparent ZnS Ceramics by Sintering of High Purity Monodisperse Nanopowders

We report an efficient way of preparing transparent ZnS ceramics using the hot‐pressing technique. It has been found that the transparency is highly dependent on the purity and the grain size distribution of the starting ZnS powders. Highly pure and monodisperse ZnS powders have been obtained by posttreatment of the precipitated powders in a H₂S/N₂ flow for 2 h at 600°C. The obtained ZnS ceramics show fully dense and homogeneous microstructure with average grain size of ~1 μm and smooth grain boundaries, leading to an excellent transmission of around 70% in the mid‐ and far‐ IR regions. The preparation technique described in this study is highly reproducible.     

Prediction of the structures of proteins with the UNRES force field, including dynamic formation and breaking of disulfide bonds

The presence of disulfide bonds is essential for maintaining the structure and function of many proteins. The disulfide bonds are usually formed dynamically during folding. This process is not accounted for in present algorithms for protein-structure prediction, which either deduce the possible positions of disulfide bonds only after the structure is formed or assume fixed disulfide bonds during the course of simulated folding. In this work, the conformational space annealing (CSA) method and the UNRES united-residue force field were extended to treat dynamic formation of disulfide bonds. A harmonic potential is imposed on the distance between disulfide-bonded cysteine side-chain centroids to describe the energetics of bond distortion and an energy gain of 5.5 kcal/mol is added for disulfide-bond formation. Formation, breaking and rearrangement of disulfide bonds are included in the CSA search by introducing appropriate operations; the search can also be carried out with a fixed disulfide-bond arrangement. The algorithm was applied to four proteins: 1EI0 (alpha), 1NKL (alpha), 1L1I (beta-helix) and 1ED0 (alpha + beta). For 1EI0, a low-energy structure with correct fold was obtained both in the runs without and with disulfide bonds; however, it was obtained as the lowest in energy only with the native disulfide-bond arrangement. For the other proteins studied, structures with the correct fold were obtained as the lowest (1NKL and 1L1I) or low-energy structures (1ED0) only in runs with disulfide bonds, although the final disulfide-bond arrangement was non-native. The results demonstrate that, by including the possibility of formation of disulfide bonds, the predictive power of the UNRES force field is enhanced, even though the disulfide-bond potential introduced here rarely produces disulfide bonds in native positions. To the best of our knowledge, this is the first algorithm for energy-based prediction of the structure of disulfide-bonded proteins without any assumption as to the positions of native disulfides or human intervention. Directions for improving the potentials and the search method are suggested.     

Improved conformational space annealing method to treat β-structure with the UNRES force-field and to enhance scalability of parallel implementation

Successful application of physics-based protein-structure prediction methods depends on sophisticated computational approaches to global optimization of the conformational energy of a polypeptide chain. One of the most effective procedures for the global optimization of protein structures appears to be the Conformational Space Annealing (CSA) method. CSA is a hybrid method which combines genetic algorithms, essential aspects of the build-up method and a local gradient-based minimization. CSA evolves the population of conformations through genetic operators (mutations, i.e. perturbations of selected geometric parameters, and crossovers, i.e. exchange of selected subsets of geometric parameters between conformations) to a final population optimizing their conformational energy. Implementation of the CSA method with the united-residue force field (UNRES, in which each amino-acid residue is represented by two interaction sites, namely the united peptide group and the united side-chain) was enhanced by introducing new crossover operations consisting of (i) copying β-hairpins, (ii) copying remote strand pairs forming non-local β-sheets, and (iii) copying α-helical segments. A mutation operation, which shifts the position of a β-turn, was also introduced. The new operations promote β-structure, and are essential for searching the conformational space of proteins containing both α- and β-structure; without these operations, excessive preference of α-helical structures is obtained, even though these structures are high in energy. Parallelization of the CSA method has also been enhanced by removing most of the synchronization steps; the improved algorithm scales almost linearly up to 1,000 processors with over 75% average performance.     

Inelastic Neutron Scattering of Hydrogen and Butyronitrile Adsorbed on Raney-Co Catalysts

Inelastic Neutron Scattering (INS) spectroscopy was used to characterize the catalytic hydrogenation of butyronitrile on the surface of parent and LiOH-modified Raney-Co. At low pressure hydrogen is mainly adsorbed on 3-fold sites. Co-adsorbed butyronitrile and hydrogen react on the unmodified Raney-Co sample to several partially hydrogenated products that contain N-H bonds. The nature of the species suggests that bi-molecular condensation leading to N-Butylidene-1-butanamine is feasible.     

Self Assembly–Assisted Additive Manufacturing: Direct Ink Write 3D Printing of Epoxy–Amine Thermosets

The use of self‐assembling, pre‐polymer materials in 3D printing is rare, due to difficulties of facilitating printing with low molecular weight species and preserving their reactivity and/or functions on the macroscale. Akin to 3D printing of small molecules, examples of extrusion‐based printing of pre‐polymer thermosets are uncommon, arising from their limited rheological tuneability and slow reactions kinetics. The direct ink write (DIW) 3D printing of a two‐part resin, Epon 828 and Jeffamine D230, using a self‐assembly approach is reported. Through the addition of self‐assembling, ureidopyrimidinone‐modified Jeffamine D230 and nanoclay filler, suitable viscoelastic properties are obtained, enabling 3D printing of the epoxy–amine pre‐polymer resin. A significant increase in viscosity is observed, with an infinite shear rate viscosity of approximately two orders of magnitude higher than control resins, in addition to, an increase in yield strength and thixotropic behavior. Printing of simple geometries is demonstrated with parts showing excellent interlayer adhesion, unachievable using control resins.     

Synthesis and Surface Active Properties of Novel Carbohydrate-based Cationic Surfactants

The synthesis of new cationic carbohydrate surfactants is presented in this paper. The obtained surfactants have structures that are typical for saponins, which contain fatty amide hydrophobic chains and hydrophilic heads with cationic carbohydrate units. Their surface active properties and biodegradability have been studied. For two types, the biodegradability was above 85% and comparable to standard carbohydrate surfactants.