Investigations on printed elastic resistors containing carbon nanotubes

This paper presents the results of authors investigations on elaboration of a new thick film composition filled with carbon nanotubes (CNTs). The polymer composition consists of polymer vehicle, which is the solution of organic resin in certain combination of solvents, and functional phase—carbon nanotubes well dispersed in the vehicle. The pastes were applied with screen-printing on several substrates and temperature cured. The properties of obtained layers were characterized. Series of samples were prepared with different amount of CNTs to evaluate electrical properties. Changes in resistance were investigated during periodic mechanical and temperature stresses, realized through cyclical bending and rapid temperature change. Tensometric effect was also investigated. Investigations have proved that polymer composites based on carbon nanotubes exhibit high resilience to stress factors. Resistance change in function of temperature was also investigated to evaluate temperature coefficient of resistance (TCR). All this aspects are important for elastic resistors fabrication in printed electronics microcircuits. Resistance and noise measurements in cryostats have also been involved. 1/f type noise has been observed. Noise intensity, calculated in decade frequency bands, rises significantly with increasing temperature. Activation energies of thermally activated noise sources (TANS) have been revealed using low-frequency noise spectroscopy. Relatively large value of negative TCR has been obtained from resistance versus temperature curve. Calculated dimensionless sensitivity is similar to that observed in cryogenic temperature sensors. However, bulk noise intensity of resistive layer is larger than obtained for lead containing RuO₂ based resistive layers.     

Pr-doped ZBLA fluoride glasses for visible laser emission

Praseodymium doped Fluoride glasses were studied in order to fabricate compact solid state laser sources emitting in the visible range for lighting application and for quantum information processing. The objective of this study is focused on red, green and orange emissions. ZBLA bulk glasses (57%ZrF₄ - 34%BaF₂ - (5 − x)%LaF₃ - 4%AlF₃ - x%PrF₃) have been synthesized under dry argon atmosphere. Physicochemical and optical properties such as density, glass transition temperature, composition, transmission and refractive index have been investigated. Spectroscopic studies have been performed to optimize the rare earth doping level in order to reach the best compromise respecting a good optical quality, a highest lifetime and efficient emission intensity at 635, 605 and 520 nm. Spectroscopic measurements have been carried out on bulk samples with Pr³⁺ concentrations ranging from 0.1 to 3 mol% and first characterizations of ion exchanged Pr: ZBLA waveguides are reported.     

基于计算机的材料性能测试

 恩斯特马赫研究所(EMI)的弗劳恩霍费尔瞬时动力学研究所通过多功能动态材料试验台、碰撞和冲击装置、冲击管装置进行实验以及数值模拟，从事材料动态特性研究，并将所确定的动态材料数据用于未来新材料的优化设计。     

Early Stages of Recrystallization in Equal-Channel Angular Pressing (ECAP)-Deformed AA3104 Alloy Investigated Using Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) Orientation Mappings

Early stages of recrystallization in alloys containing complex structure of second phase particles are of considerable practical interest. They were observed for the AA3104 alloy in which large particles occur against the background of randomly distributed dispersoids. The samples were deformed by equal channel angular pressing and then slightly annealed to obtain the state of partial recrystallization. The highly deformed alloy contained a structure of flat grains with the spacing between high-angle grain boundaries ranging from 100 nm to 1 ??m. On annealing, the structure coarsened and got transformed into nearly equiaxed grains by both discontinuous and continuous recrystallization. The nucleation of new grains was observed in statically recrystallized bulk samples using scanning electron microscopy, and during in-situ recrystallization in a transmission electron microscope. Special attention was paid to the nucleation of new grains in areas close to large second phase particles, where a relatively high stored energy was expected to stimulate nucleation. A particular role in the rise of nuclei is attributed to migration of low angle boundaries. During recrystallization at 623 K (350?°C), in most of the observed cases, the growth of grains occurred by coalescence of neighbouring cells and by migration of high-angle grain boundaries. These processes led to nearly equiaxed grains of similar size. Orientation mappings showed that although orientations of new grains were widely scattered, they were not completely random.     

On the approximability of minmax (regret) network optimization problems

In this paper the minmax (regret) versions of some basic polynomially solvable deterministic network problems are discussed. It is shown that if the number of scenarios is unbounded, then the problems under consideration are not approximable within log1−?K for any ?>0 unless NP⊆DTIME(npolylogn), where K is the number of scenarios.     

Monitoring Process Variability for Stationary Process Data

Processes that arise naturally, for example, from manufacturing or the environment, often exhibit complicated autocorrelation structures. When monitoring such a process for changes in variance, accounting for that structure is critical. While charts for monitoring the variance of processes of independent observations and some specific autocorrelated processes have been proposed in the past, the chart presented in this article can handle a general stationary process. The performance of the proposed chart was examined through simulations for the first‐order autoregressive and first‐order autoregressive‐moving average processes and demonstrated with examples. Copyright © 2014 John Wiley & Sons, Ltd.     

Basis enrichment and solid–fluid coupling for model‐reduced fluid simulation

We present several enhancements to model‐reduced fluid simulation that allow improved simulation bases and two‐way solid–fluid coupling. Specifically, we present a basis enrichment scheme that allows us to combine data‐driven or artistically derived bases with more general analytic bases derived from Laplacian eigenfunctions. We handle two‐way solid–fluid coupling in a time‐splitting fashion—we alternately timestep the fluid and rigid body simulators, while taking into account the effects of the fluid on the rigid bodies and vice versa. We employ the vortex panel method to handle solid–fluid coupling and use dynamic pressure to compute the effect of the fluid on rigid bodies. Copyright © 2014 John Wiley & Sons, Ltd.     

Physiologic Insulin Resensitization as a Treatment Modality for Insulin Resistance Pathophysiology

Prevalence of type 2 diabetes increased from 2.5% of the US population in 1990 to 10.5% in 2018. This creates a major public health problem, due to increases in long-term complications of diabetes, including neuropathy, retinopathy, nephropathy, skin ulcers, amputations, and atherosclerotic cardiovascular disease. In this review, we evaluated the scientific basis that supports the use of physiologic insulin resensitization. Insulin resistance is the primary cause of type 2 diabetes. Insulin resistance leads to increasing insulin secretion, leading to beta-cell exhaustion or burnout. This triggers a cascade leading to islet cell destruction and the long-term complications of type 2 diabetes. Concurrent with insulin resistance, the regular bursts of insulin from the pancreas become irregular. This has been treated by the precise administration of insulin more physiologically. There is consistent evidence that this treatment modality can reverse the diabetes-associated complications of neuropathy, diabetic ulcers, nephropathy, and retinopathy, and that it lowers HbA1c. In conclusion, physiologic insulin resensitization has a persuasive scientific basis, significant treatment potential, and likely cost benefits.