Preparation of nanoclay incorporated PAN fibers by electrospinning technique and its application for oil and organic solvent absorption

In this work, polymer nanofibers (PAN/n-OMMT clay) were successfully produced by using an electrospinning process. The PAN/n-OMMT nanofibers were studied as an oil and solvent absorbent material due to their super hydrophobicity and super oleophilic properties. The generated composite nanofibers were found to have a very high oil and solvent absorption capacity in the case of 3% n-OMMT clay loading. It showed excellent absorption capacity up to 160 times its own weight for motor oil. The findings reported in this work might provide a fast and facile approach for the removal of oils and organic solvents on water surfaces.     

Investigation of the hydrogen production of a laser FUSION driver thorium breeder using various coolants

In this present work, hydrogen production and neutronic calculations of a Laser Inertial Confinement Fusion Fission Energy (LIFE) driven thorium breeder using various coolants have been investigated. In the neutronic calculations for fusion driver power of 500 MW_th has been examined with MCNP code. The 95 vol% Flibe or natural lithium 5 vol% TRISO coated ThC fuels have used in the neutronic calculations. Tritium breeding ratio (TBR) has been calculated as 1.08 and 1.19, respectively, for Flibe and natural lithium coolants. The energy multiplication values have been computed as 3.17 and 1.62, respectively, for these coolants. The burnup values with flibe and natural lithium have been obtained as 6 GWd/tM and 22 GWd/tM over 11 and 23 years, respectively. Also, the hydrogen production of a laser fusion driver thorium breeder using steam methane reforming (SMR), high temperature electrolysis (HTE) and sulfur-iodine (S–I) thermochemical water splitting processes have been performed. The highest hydrogen production values with flibe coolant of SMR method have been obtained as ~200 kg/s over 11 years.     

First-Principles Calculations of Structural,Electronic, Optical,and Thermoelectric Properties of LuNiBi and LuNiSb Half-Heusler

Journal of Superconductivity and Novel Magnetism - The structural, electronic, optical, and thermo-electric properties of LuNiBi and LuNiSb Half-Heusler have been studied using a full potential...     

Increased fuel burn up in a CANDU thorium reactor using weapon grade plutonium

Weapon grade plutonium is used as a booster fissile fuel material in the form of mixed ThO₂/PuO₂ fuel in a Canada Deuterium Uranium (CANDU) fuel bundle in order to assure the initial criticality at startup.Two different fuel compositions have been used: (1) 97% thoria (ThO₂) + 3%PuO₂ and (2) 92% ThO₂ + 5% UO₂ + 3% PuO₂. The latter is used to denaturize the new ²³³U fuel with ²³⁸U. The temporal variation of the criticality k_∞ and the burn-up values of the reactor have been calculated by full power operation for a period of 20 years. The criticality starts by k_∞ = 1.48 for both fuel compositions. A sharp decrease of the criticality has been observed in the first year as a consequence of rapid plutonium burnout. The criticality becomes quasi constant after the second year and remains above k_∞ > 1.06 for 20 years. After the second year, the CANDU reactor begins to operate practically as a thorium burner.Very high burn up could be achieved with the same fuel material (up to 500,000 MW·D/T), provided that the fuel rod claddings would be replaced periodically (after every 50,000 or 100,000 MW·D/T). The reactor criticality will be sufficient until a great fraction of the thorium fuel is burnt up. This would reduce fuel fabrication costs and nuclear waste mass for final disposal per unit energy drastically.     

Investigation of two ultrafiltration membranes for treatment of olive oil mill wastewater

In this study, a promising treatment method is given for the olive oil mill wastewater (OMWW). Although the same steps of this method have been used in different studies before, flow scheme is novel. The membrane filtration of pretreated OMWW was investigated by using two ultrafiltration membranes in this study. Pretreatment steps were pH adjustment (pH = 2) and cartridge filter filtration, and pH adjustment (pH = 6) and cartridge filter filtration. Each step of cartridge filter filtration was batch process and effluent from the filter was recycled back to OMWW tank. Pretreated OMWW was sent to feed vessel of experimental set-up. Recovery of olive oil in the OMWW was realized collecting it from the top of pretreated OMWW. Ultrafiltration membranes used were JW and MW membranes supplied by Osmonics. The effects of main operating parameters (transmembrane pressure, feed flow rate, pH and membrane type) on the permeate flux and membrane fouling were examined. The effectiveness of the different membranes and operating conditions was evaluated using retention coefficients calculated from COD and TOC of experimental studies. The highest permeate flux (25.9 l/m² h) was obtained using MW membrane under operational conditions of Qf = 200 l/h flow rate and TMP = 4 bar, while the highest removals were obtained at Qf = 100 l/h flow rate and TMP = 1 bar. COD, TOC, SS, oil and grease concentrations of MW membrane effluent were 6400 mg/l, 2592 mg/l, 320 mg/l, and 270 mg/l, respectively.     

Properties of spray-dried food flavours microencapsulated with two-layered membranes: Roles of interfacial interactions and water

Engineering the interface of oil-in-water emulsion droplets with biopolymers that modify its permeability could provide a novel technique to improve flavour retention in dry powders. The objective of this study was to determine if volatile compounds were more retained in dry emulsions stabilized by pea protein isolate (PPI)/pectin complex than that stabilized by PPI alone. The retention of ethyl esters during spray-drying increased with decreasing volatility of the encapsulated compound and ranged from 28% to 40%. The addition of pectin to feed emulsions was quite effective in markedly improving the retention of the three studied flavour compounds. In our previous work (Gharsallaoui et al., 2010), we showed that pectin was able to improve physical integrity of emulsion oil droplets during spray-drying. However, the pectin positive effect on both the droplet stability and the flavour retention at the time of spray-drying can also be explained by a protein molecular structure protective effect. Indeed, the obtained FTIR results showed that pectin was able to preserve the β-sheet secondary structure of pea protein when pea globulins/pectin complexes are heated. The study of the release characteristics of a flavour compound from dried powders showed that pectin addition did not affect the release profile mainly accomplished by the diffusion mechanism.     

Poly(methyl methacrylate)/clay nanocomposites by photoinitiated free radical polymerization using intercalated monomer

A series of poly(methyl methacrylate)/montmorillonite (PMMA/MMT) nanocomposite were prepared by successfully dispersing the inorganic nanolayers of MMT clay in an organic PMMA matrix via in situ photoinitiated free radical polymerization. Methyl methacrylate monomer was first intercalated into the interlayer regions of organophilic clay hosts by “click” chemistry followed by a typical photoinitiated free radical polymerization. The intercalated monomer was characterized by FT-IR spectroscopy, elemental analysis and thermogravimetric analysis methods. The intercalation ability of the modified monomer and exfoliated nanocomposite structure were confirmed by X-ray diffraction spectroscopy (XRD), transmission electron microscopy (TEM) and atomic force microscopy (AFM). Thermal stability of PMMA/MMT nanocomposites was also studied by both differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA).     

Nanomechanical characterization by double-pass force-distance mapping

We demonstrate high speed force-distance mapping using a double-pass scheme. The topography is measured in tapping mode in the first pass and this information is used in the second pass to move the tip over the sample. In the second pass, the cantilever dither signal is turned off and the sample is vibrated. Rapid (few kHz frequency) force-distance curves can be recorded with small peak interaction force, and can be processed into an image. Such a double-pass measurement eliminates the need for feedback during force-distance measurements. The method is demonstrated on self-assembled peptidic nanofibers.     

One-pot preparation of fluorinated mesoporous silica nanoparticles for liquid marble formation and superhydrophobic surfaces

One-pot synthesis of fluorinated mesoporous silica nanoparticles (FMSNs) is reported. Uniform mesoporous nanoparticles are prepared by condensation of tetraethyl orthosilicate (TEOS) and fluoroalkyl containing organotriethoxy silane monomers, respectively. The method enables selective deposition of fluorine atoms on the surface of the particles. FMSNs are used to prepare stable liquid marbles with water. An organo-modified silica sol is used with FMSNs to prepare mechanically stable superhydrophobic surfaces (water contact angle of 161°). The mechanical stability of the surface is investigated with water dripping and adhesive tape tests. The prepared FMSNs are promising building blocks for robust, large-area, and multifunctional self-cleaning surfaces.