Failure Analysis of Seawater Inlet Pipe

A seawater inlet pipe failed in service. The visual examination showed that the backing bar was present inside the pipe and the failure was characterized by leaks at approximately 4–8 o’clock position near that backing bar. The finite element analysis of fluid in the seawater inlet pipe showed that the eddy zone was formed near the backing bar. The leaks and crater-like surfaces were noticed on the inner pipe surface at which the finite element analysis modeled the possibility of the formation of eddy zone.     

Simultaneous optimal integration of water utilization and heat exchange networks using holistic mathematical programming

A systematic holistic mathematical programming (HMP) is proposed to formulate a mixed integer nonlinear programming (MINLP) model for one-step optimization of water-allocation and heat exchange network (WAHEN) designs with single- or multi-contaminant water streams. The proposed model formulation and solution strategy are believed to be superior to the available ones in the following aspects. First, a comprehensive representation combining two separate superstructures is adopted to capture the structural characteristics of the integrated WAHEN. Then, a hybrid optimization strategy integrating stochastic and deterministic components is developed for the resulting MINLP model and, also, an interactive iteration method is adopted based on sensitivity analysis to guide the search toward a potential global optimum. Finally, evolutionary strategies and manipulations are executed to enhance WAHEN configurations. Two illustrative examples are presented to demonstrate the validity and advantages of the proposed approach.     

Perceptual audio data concealment and watermarking scheme using direct frequency domain substitution

A method is described for perceptually transparent data concealment and watermarking in audio. The proposed system replaces redundant and imperceptible frequency components with hidden data. A psychoacoustic model is used to identify suitable frequency locations for data hiding. Such a method is complicated by the windowing and overlapping requirements used for signal conditioning. The proposed system uses data flipping in place of windowing and incorporates a novel data detection scheme with adaptive weighting to increase the robustness of the watermark transmission. The resistance of the watermarking system to filtering, amplitude scaling and additive white noise is measured and results presented.     

Beyond plain weave fabrics – I. Geometrical model

In response to the large variety of weaving styles offered by the textile industry, a new general approach for the geometrical modeling of 2D biaxial orthogonal woven fabric reinforcements for composite materials is proposed here. New geometrical parameters are introduced in order to describe general families of twill and satin woven patterns, and a new classification of woven fabrics is proposed based on these parameters. Generation of the 3D internal geometry of the woven fabric families is achieved based on new geometrical functions that consider the actual configuration of the composite material in all its complexity. The proposed geometrical model is intended as the foundation for further analytical or numerical modeling of the mechanical properties of the composite materials reinforced with these fabrics.     

Solid-state photoelectrochemical device based on poly(3-hexylthiophene) and an ion conducting polymer electrolyte, amorphous poly(ethylene oxide) complexed with I3/I redox couple

The photoelectrochemical properties of a solid-state photoelectrochemical cell (PEC) based on poly(3-hexylthiophene), P3HT, and an ion-conducting polymer electrolyte, amorphous poly(ethylene oxide), POMOE, complexed with I₃⁻/I⁻ redox couple has been constructed and studied. The current–voltage characteristics in the dark and under white light illumination, transient photocurrent and photovoltage studies, photocurrent action spectra for front and back side illuminations and an open-circuit voltage and short-circuit current dependence on light intensity have been studied. An open-circuit voltage of 130 mV and a short-circuit current of 0.47 μA cm⁻² were obtained at light intensity of 100 mW/cm². IPCE% of 0.024% for front side illumination (ITO/PEDOT) and IPCE% of 0.003% for backside illumination (ITO/P3HT) were obtained.     

Nuclear magnetic resonance studies of ionomers. 6. Polyurethane-polyphosphonate blends

Blending of a poly(ether urethane) with a polyphosphonate obtained by phase transfer catalyzed polycondensation of 4,4′-biphenol and chloromethylphosphonic dichloride generates a phase-separated material. One phase contains the soft segment of the polyurethane. This has been excluded from a high-T_g phase that contains ionic species formed mainly by proton transfer and elimination reactions between the hard segment of the polyurethane and the polyphosphonate. Two glass transitions appear in the blend: one close to the T_g of the polyphosphonate and one belonging to the excluded soft segment of the polyurethane. The low temperature T_g decreases with the increasing content of the polyphosphonate, whereas the high temperature transition increases slightly, indicating an increasing purity of the soft segment and the presence of ionic interactions in the hard segment. The presence of ionic interactions is confirmed by NMR analysis of the blend. Comparison of the spectra of the blends with those of the pure components, along with two-dimensional experiments, indicate a reaction involving the chloromethyl groups of the polyphosphonate and the nitrogens of the polyurethane.     

Use of attenuated total reflection infrared spectroscopy for analysis of partitioning of solutes between thin films and solution

The paper examines attenuated total reflection (ATR) spectroscopy as a tool for quantifying the partitioning of small molecular species between a solution and a thin film, while the film is directly exposed to the solution for equilibration. For the case of a thin film having a thickness substantially smaller than the decay length of the evanescent wave, we developed suitable linear relationships that relate the measured absorption of the characteristic band to the concentration of the species under study in the film and in solution. In the application of ATR-Fourier transform infrared spectroscopy, the method is particularly suitable for films a few tens to hundreds of nanometers thick and for solutes that preferentially partition into the film. As an example, the partitioning isotherm of 1-pentanol between water and a thin polyamide film separated from a reverse osmosis membrane was determined experimentally, and the limitations of the method are discussed.     

Dynamic mechanical properties of polystyrene-polydimethylsiloxane blends

It was found that commercial silicone grease incorporated accidentally into polystyrene bars yields a major dynamic mechanical loss peak at ca. ?128°C. This finding was followed up with a study of various polydimethylsiloxanes and silicone rubber, in which up to three peaks were found. In order of increasing temperature (at 1 Hz) these are the glass transition (T_g; ca. ?128°C), crystallization (T_c; ca. ?110°C) and melting peaks (T_m; ca. ?50°C). Hydrocarbon-based greases were also investigated. The results indicate that the methods employed may be of use for the investigation of the dynamic mechanical properties of small amounts of material of varying particle sizes, such as powders of cross-linked polymers, that need not be compatible with, or soluble in, the host matrix. The sensitivity of the method is such at a 1 percent by weight contamination of silicone grease in polystyrene gives a loss tangent peak of at least 0.002 above background, and emphasizes the necessary care to be taken during sample preparation to exclude unwanted substances.     

Organocatalytic Application of Direct Organo-Functionalized Mesoporous Catalysts Prepared by Microwave

The organic functional groups such as primary and quaternary amine, sulfonic acid, and amino acid, especially l-proline, have been tried to immobilize onto mesoporous materials by the direct synthesis method using microwave. Microwave induced direct functionalization enabled to get well ordered mesoporous structures and stable organic tethered groups with enhanced hydrothermal stability due to more hydrophobic surfaces as well as enhanced activity. The method is also useful for overcoming several shortcomings in the post-synthesis grafting method which suffers from pore blocking at the aperture, and difficulties in controlling the as obtained from the direct co-condensation method had their functional groups spatially loadings, as well as the dispersion of active sites. The organo-functionalized mesoporous silica dispersed on the surface which could play roles as single site catalysts. Direct tethering of organic functional groups was preferably synthesized by microwave, gave morphological control and illustrated superiority in some organocatalytic application such as Knoevenagel and Henry reactions base catalytic reaction, Claisen–Schmidt condensation, and diethyl malonate addition reactions.