Roof pond cooling of buildings in hot arid climates

The weather in Baghdad, Iraq is hot dry in the summer while water is plentiful and cheap. These are conditions which encourage the use of evaporative cooling. A building with one space in it was used to test the effect of a roof pond which was ventilated mechanically for summer cooling. Thermal measurements were taken for the room in normal conditions without a pond, with a lone pond and no mechanical ventilation, and then finally with mechanically forced ventilation. The results showed a marked improvement in the space temperature with a significant reduction during the peak time outside temperatures at 3 O’clock reaching 6.0 °C between the room without the pond and with a ventilated one and 6.5° at 18:00 during peak inside temperatures. The study also showed that improvements would be better in real-life conditions where exterior wall area is less than the test room.     

Effect of γ-irradiation on granule structure and physicochemical properties of starch extracted from two types of potatoes grown in Jammu & Kashmir,India

In this study red and white potato starches were treated with γ-irradiation of 0, 5, 10 and 20 kGy. Physicochemical, pasting and morphological properties of the irradiated starches were investigated. Apparent amylose content, pH, moisture, swelling power and syneresis decreased; whereas carboxyl content, water absorption capacity and solubility increased with increasing irradiation dose. Pasting properties also decreased significantly (p ≤ 0.05) upon increasing the irradiation dose. Observation under scanning electron microscope (SEM) showed surface cracking of the starch granules by γ-irradiation which increased with increase in irradiation dose. X-ray diffraction pattern remained the same upon irradiation but a decrease in relative crystallinity was observed with increasing irradiation dose.     

Development of questionnaire to assess manufacturing capability along different decision areas

Superior manufacturing capability provides long lasting competitive benefits to a company in the market. It is thus imperative to have an instrument to assess the manufacturing capability of companies. However, empirically tested and reliable tools for the purpose of evaluation of manufacturing capability along different decision areas are scarcely available in the literature. This paper develops questionnaires based on generally accepted principle of instrument design to assess the manufacturing capabilities along different decision areas for four categorization schemes of manufacturing decision areas reported in the literature. The reliability and validity of all four instruments are assessed through responses from managers of 32 manufacturing units and are found to be satisfactory for most of the factors. The criterion validity is found to be fairly good for all the four instruments.     

Seed Oil Based Zinc Bioactive Polymers: Synthesis, Characterization and Biological Studies

Zinc containing oil based polyesteramide resins were synthesized by condensation polymerization reaction between castor/soyabean oil derived castor/soyabean fatty amide diol (HECA/HESA), Zn (OH)₂ and adipic acid. The conventional spectroscopic techniques such as FTIR, ¹HNMR, ¹³CNMR have been used to establish the structure of the polymers. Standard laboratory methods were used to study the physicochemical characteristics like acid value, hydroxyl value, saponification value, iodine value, specific gravity, and viscosity. The thermal behaviour of the polymers was analyzed by using thermo gravimetric analysis (TGA) and differential scanning calorimetry (DSC). In vitro antifungal (anticandidial) activity of the polymers was studied against C. albicans ATCC-10261, C. glabrata ATCC-90030 and C. tropicalis ATCC-750, respectively. Antibacterial activity against Gram positive (S. subtillis) and Gram negative bacteria (E. coli and S. typhi) was also examined. For more accuracy, growth curve studies were carried out with the polymer SZ showing higher biological activity against E. coli by using conventional spectrophotometer. The result showed that the polymers have potent anticandidial and antibacterial activities.     

Serendipitous Identification of a Covalent Activator of Liver Pyruvate Kinase

Enzymes are effective biological catalysts that accelerate almost all metabolic reactions in living organisms. Synthetic modulators of enzymes are useful tools for the study of enzymatic reactions and can provide starting points for the design of new drugs. Here, we report on the discovery of a class of biologically active compounds that covalently modifies lysine residues in human liver pyruvate kinase (PKL), leading to allosteric activation of the enzyme (EC₅₀=0.29 μM). Surprisingly, the allosteric activation control point resides on the lysine residue K282 present in the catalytic site of PKL. These findings were confirmed by structural data, MS/MS experiments, and molecular modelling studies. Altogether, our study provides a molecular basis for the activation mechanism and establishes a framework for further development of human liver pyruvate kinase covalent activators.     

Effect of toluene proportion on the yield and composition of oils obtained by supercritical extraction of Moroccan oil shale

Supercritical extraction of Tarfaya's oil shale by toluene revealed that the solvent proportion has a significant effect on the yield and the composition of the obtained oils. The analyses carried out on the recovered oils allowed to establish the optimal operating conditions giving the highest oil yields. In addition, it was observed that these oils contain a large proportion of aromatics compounds.     

Seismic friction base isolation performance using demolished waste in masonry housing

The conversion of large amount of demolished waste into alternate source of building material will contribute not only as a solution to growing waste problem of waste disposal, but also it will conserve the natural resources of other building material and thereby reduce the cost of construction. The present work makes an effort to safe and economic use of recycled mortar as a supplementary material. Conventional and recycled brick prisms were casted with varying percentage of demolished waste added (0%, 10%, 20%, 30%) replacing cement and tested under compression testing machine. As the replacement is increasing, the strength is decreasing. A 1:4 scale single storey brick model was fabricated on shake table for dynamic testing using pure friction isolation system (friction material for coarse dry sand, μ = 0.36). Pure friction isolation technique can be adopted economically in developing countries where low-rise building prevails due to their low cost. The superstructure was separated from the foundation at plinth level, so as to permit sliding of superstructure during severe earthquake. The observed values of acceleration and displacement responses compare fairly with the analytical values of the analytical model except in displacement beyond 2.4 kN. It also concluded that 20% replacement of cement by demolished waste could be safely adopted without endangering the safety of the masonry structures under seismic load.To have an idea that how much energy is dissipated through this isolation, the same model with fixed base was tested and results were compared with the isolated free sliding model and it has been observed that more than 70% energy is dissipated through this pure friction isolation technique. In case of base isolation, no visible cracks were observed up to a table force of 4.25 kN (1300 rpm), whereas for fixed base failure started at 800 rpm and complete bond failure was observed at 1300 rpm.