An analytical solution to wellbore stability using Mogi-Coulomb failure criterion

Deep wellbores/boreholes are generally drilled into rocks for oil and gas exploration, monitoring of tectonic stresses purposes. Wellbore and tunnel in depth are generally in true triaxial stress state, even if the ground is under axisymmetric loading condition. Stability of such wellbores is very critical and collapse of wellbore must be avoided. Mogi-Coulomb failure criterion is a better representation of rock strength under true triaxial condition. In this paper, an analytical solution is proposed using Mogi-Coulomb failure criterion. The solution is obtained for rock mass exhibiting elastic-perfectly plastic or elastic-brittle-plastic behaviour considering in-plane isotropic stresses. The proposed solution is then compared with exact analytical solution for incompressible material and experimental results of thick-wall cylinder. It is shown that the results obtained by the proposed analytical solution are in good agreement with the experimental results and exact analytical solution. A reduction of about 13%–20% in plastic zone from the proposed closed-form solution is observed, as compared to the results from the finite element method (FEM) based Mohr-Coulomb criterion. Next, the influences of various parameters such as Poisson's ratio, internal pressure (mud weight), dilation angle, and out-of-plane stress are studied in terms of stress and deformation responses of wellbore. The results of the parametric study reveal that variation in the out-of-plane stress has an inverse relation with the radius of plastic zone. Poisson's ratio does not have an appreciable influence on the tangential stress, radial stress and radial deformation. Dilation angle has a direct relation with the deformation. Internal pressure is found to have an inverse relation with the radial deformation and the radius of plastic zone.     

Design,Performance Analysis of GaAs/6H-SiC/AlGaN Metal Semiconductor FET in Submicron Technology

Silicon - A unique structure of GaAs/6H-SiC/InGaN metal–semiconductor field-effect transistor has been proposed and demonstrated in this work. The proposed GaAs/6H-SiC/InGaNMetal...     

A Qualitative Review on Tunnel Field Effect Transistor- Operation,Advances, and Applications

Silicon - Tunnel Field Effect Transistor (TFET) has become one of the promising devices to be part of Integrated circuits as the technology advances to the nanoscale. A TFET has many advantages...     

Morphology‐dependent electrocatalytic activity of nanostructured Pt/C particles from hybrid aerosol–colloid process

An optimum nanostructure and pore size of catalyst supports is very important in achieving high catalytic performances. In this instance, we evaluated the effects of various carbon nanostructures on the catalytic performances of carbon‐supported platinum (Pt/C) electrocatalysts experimentally and numerically. The Pt/C catalysts were prepared using a hybrid method involving the preparation of dense, hollow, and porous nanostructured carbon particle via aerosol spray pyrolysis followed by microwave‐assisted Pt deposition. Electrochemical characterization of the catalysts showed that the porous Pt/C catalyst gave the best performance; its electrochemical surface area was much higher, more than twice than those of hollow or dense Pt/C. The effects of pore size on electrocatalysis were also studied. The results showed the importance of a balance between mesopores and macropores for effective catalysis with a high charge transfer rate. A fluid flow model showed that good oxygen transport contributed to the catalytic activity. © 2015 American Institute of Chemical Engineers AIChE J, 62: 440–450, 2016     

Demonstrating the effect of vertical and directional shear for resource mapping of wind power

The use of wind energy is growing around the world, and its growth is set to continue into the foreseeable future. Estimates of the wind speed and power are helpful to assess the potential of new sites for development and to facilitate electric grid integration studies. In the present paper, wind speed and power resource mapping analyses are performed. These resource mappings are produced on a 13 km, hourly model grid over the entire continental USA for the years of 2006–2014. The effects of the rotor equivalent wind speed (REWS) along with directional shear are investigated. The total dataset (wind speed and power) contains ≈152,000 model grid points, with each location containing ≈78,000 hourly time steps. The resource mapping and dataset are created from analysis fields, which are output from an advanced weather assimilation model. Two different methods were used to estimate the wind speed over the rotor swept area (with rotor diameter of 100 m). First, using a single wind speed at hub height (80 m) and, second, the REWS with directional shear. The demonstration study shows that in most locations the incorporation of the REWS reduces the average available wind power. In addition, the REWS technique estimates more wind power production at night and less production in the day compared with the hub height technique; potentially critical for siting new wind turbines and plants. However, the wind power estimate differences are dependent on seasonality, diurnal cycle and geographic location. More research is warranted into these effects to determine the level at which these features are observed at actual wind plants.© 2015 The Authors. Wind Energy published by John Wiley & Sons, Ltd.     

An analytical solution to the extended Navier–Stokes equations using the Lambert W function

Microchannel gas flows are of importance in a wide range of microelectro mechanical devices. In these flows, the mean free path of the gas can be comparable to the characteristic length of the microchannel, leading to strong diffusion‐enhanced transport of momentum. Numerical solutions to the extended Navier–Stokes equations (ENSE) have successfully modeled such microchannel flows. Analytical solutions to the ENSE for the pressure and velocity fields using the Lambert W function are derived. We find that diffusive contributions to the total transport are only dominant for low average pressures and low pressure drops across the microchannel. For large inlet pressures, we show that the expressions involving the Lambert W function predict steep gradients in the pressure and velocity localized near the channel exit. We extract a characteristic length for this boundary layer. Our analytical results are validated by numerical and experimental results available in the literature. © 2014 American Institute of Chemical Engineers AIChE J, 60: 1413–1423, 2014     

Examining the Suitability of the Reaction Engineering Approach (REA) to Modeling Local Evaporation/Condensation Rates of Materials with Various Thicknesses

The reaction engineering approach (REA) is examined here to investigate its suitability as the local evaporation rate to be used in multiphase drying. For this purpose, REA is first implemented to model the convective drying of materials with various thicknesses. The relative activation energy, as the fingerprint of REA, generated from one size of a material is used to model the convective drying of the same material with different thicknesses. Because the results indicate that REA parameters can model the drying of materials with various thicknesses, REA can be scaled down to describe the local evaporation rate (at the microscale as affected by local composition and temperature). The relative activation energy is used to describe the global drying rate in modeling the local evaporation rate. REA is combined with a system of equations of conservation of heat and mass transfer in order to yield the spatial reaction engineering approach (S-REA) as a nonequilibrium multiphase drying model. By using S-REA, the spatial profiles of moisture content, concentration of water vapor, temperature, and local evaporation rate can be generated, which can assist in comprehending the transport phenomena.     

Design and assessment of delay timer alarm systems for nonlinear chemical processes

In process and manufacturing industries, alarm systems play a critical role in ensuring safe and efficient operations. The objective of a standard industrial alarm system is to detect undesirable deviations in process variables as soon as they occur. Fault detection and diagnosis systems often need to be alerted by an industrial alarm system; however, poorly designed alarms often lead to alarm flooding and other undesirable events. In this article, we consider the problem of industrial alarm design for processes represented by stochastic nonlinear time‐series models. The alarm design for such complex processes faces three important challenges: (1) industrial processes exhibit highly nonlinear behavior; (2) state variables are not precisely known (modeling error); and (3) process signals are not necessarily Gaussian, stationary or uncorrelated. In this article, a procedure for designing a delay timer alarm configuration is proposed for the process states. The proposed design is based on minimization of the rate of false and missed alarm rates—two common performance measures for alarm systems. To ensure the alarm design is robust to any non‐stationary process behavior, an expected‐case and a worst‐case alarm designs are proposed. Finally, the efficacy of the proposed alarm design is illustrated on a non‐stationary chemical reactor problem. © 2017 American Institute of Chemical Engineers AIChE J, 63: 77–90, 2018     

Superconducting State Parameters of (Ni33Zr67)1?xMx (M = Ti, V, Co, Cu) Ternary Amorphous Superconductors

The theoretical investigations of the superconducting state parameters (SSP) viz. electron-phonon coupling strength λ, Coulomb pseudopotential μ ^∗, transition temperature T _C , isotope effect exponent α and effective interaction strength N _O V of (Ni₃₃Zr₆₇)_1−x M _x (M=Ti,V,Co,Cu) ternary amorphous superconductors have been reported using Ashcroft’s empty core (EMC) model potential. Five different types of local field correction functions proposed by Hartree (H), Taylor (T), Ichimaru-Utsumi (IU), Farid et al. (F) and Sarkar et al. (S) are used in the present investigation to study the screening influence on the aforesaid properties. The T _C obtained from Sarkar et al. (S) local field correction function are found in excellent agreement with available theoretical data. Quadratic T _C equation has been proposed, which provides successfully the T _C values of ternary amorphous alloys under consideration. Also, the present results are found to be in qualitative agreement with other such earlier reported data, which confirms the superconducting phase in the superconductors.