Fade and quench-resistant emission in calcium phosphate nanoreactors

The fluorescence emission and photodegradation properties of fluorescein dye inside fluid-filled spherical nanoreactors ～ 150 nm in diameter and surrounded by a few nanometres thick layer of calcium phosphate are considered in detail. Steady state, stopped flow, and laser pulsed fluorescence spectroscopies, absorption spectroscopy, dynamic light scattering and electron microscopy were used to characterize the materials as a function of encapsulated dye concentration, particle concentration, illumination time, and pH. Fluorescein tends to form stable J-aggregates inside the nanoreactors. The molecular collision rate constants between the dye aggregates and between the dyes and soluble quenchers are greatly reduced inside the nanoreactors and are responsible for the observed resistance to photodegradation and reduced emission quenching. A model for dye behaviour in nanoreactors is suggested. Nanoreactors can be concentrated to a high suspension concentration, yielding exceptionally strong luminescence affected only by inner filter effects absent particle-particle crosstalk. These and similar nanoreactors can be utilized as building blocks for three-dimensional photo-optical devices, and as versatile and resilient supramolecular chromophores or tracers in complex fluids, cells and microfluidic systems where high resolution visualization is needed.     

Acetyldiaminobutanoic acid,a potential lathyrogenic amino acid in leaves of Acacia angustissima

Acacia angustissima has potential in agroforestry systems for forage production in tropical environments. However, feeding trials indicate that the leaves are potentially toxic. Signs of toxicity in sheep are similar to those presented by sheep fed flatpea (Lathyrus sylvestris) hay which contains a high concentration of the non‐protein amino acid 2,4‐diaminobutanoic acid (DABA). Cation exchange chromatography, high‐performance liquid chromatography (HPLC) and NMR were used to isolate and identify the non‐protein amino acid in A angustissima leaves. A quantitative HPLC method was used to determine the content of the non‐protein amino acid in leaves from 20 accessions. The non‐protein amino acid was identified as 4‐N‐acetyl‐2,4‐diaminobutanoic acid (ADAB), previously reported to occur in seeds. The average and range in ADAB content were 16.8 and 10.6–25.4 mg g^?1 respectively. This content of ADAB is higher than the levels of DABA in flatpea hay that are toxic to sheep. © 2001 Society of Chemical Industry     

A novel electron beam-based method for the immobilization of trypsin on poly(ethersulfone) and poly(vinylidene fluoride) membranes

A novel technique for the covalent immobilization of trypsin in a one-step reaction using low-energy electron beam is described. The enzyme immobilization was applied on poly(ethersulfone) and poly(vinylidene fluoride) microfiltration membranes. For this purpose, the membranes were dipped in an aqueous solution of trypsin followed by electron beam treatment.The effect of irradiation conditions on the immobilization was investigated, as well as the resulting membrane properties with respect to enzymatic activity, immobilized enzyme concentration, pure water flux, scanning electron microscopy, and porosimetry. This technique shall provide a simple, inexpensive method for enzyme immobilization on various polymer membranes and offer a tool for the application in enzymatic membrane reactors.     

The Interplay between Drivers of Erythropoiesis and Iron Homeostasis in Rare Hereditary Anemias: Tipping the Balance

Rare hereditary anemias (RHA) represent a group of disorders characterized by either impaired production of erythrocytes or decreased survival (i.e., hemolysis). In RHA, the regulation of iron metabolism and erythropoiesis is often disturbed, leading to iron overload or worsening of chronic anemia due to unavailability of iron for erythropoiesis. Whereas iron overload generally is a well-recognized complication in patients requiring regular blood transfusions, it is also a significant problem in a large proportion of patients with RHA that are not transfusion dependent. This indicates that RHA share disease-specific defects in erythroid development that are linked to intrinsic defects in iron metabolism. In this review, we discuss the key regulators involved in the interplay between iron and erythropoiesis and their importance in the spectrum of RHA.     

Statistical evaluation of dye desorption – mixed two- and three-level design and kinetic modeling

Abstract

Biosorption has been shown in the literature to be effective in the removal of dye from aqueous solution. To be fully useful, a desorption process is necessary, which has a direct impact on the process costs. The aim of this work was to evaluate the desorption of the azo dye Acid Yellow 23 adsorbed in a biosorbent obtained from Bombyx mori cocoons. Temperature and pH media were evaluated through a mixed two- and three-level design, using NaOH as desorbing agent. Kinetic desorption was also obtained at the optimized condition. The statistical evaluation of the experimental design showed that the pH has almost two times more influence on the dye desorption than the temperature, with only the linear parameters being statistically significant. Among four kinetic desorption models adjusted to the experimental data, the proposed n-order model was statistically determined as the best representation of the experimental data.     

Cold tolerance of Tineola bisselliella (Lepidoptera: Tineidae) eggs at slow cooling rate

Eggs of T. bisselliella were exposed to sub-zero temperatures at a cooling rate of 2°C/h to a minimum of −20°C. Observed mortality was closely approximated by predictions based on an adapted fixed temperature model. The eggs showed no acclimation during cooling. In combination with thermal conductivity models the mortality model provides a simple method to predict exposure times required to reach the desired level of mortality in the cold disinfestation treatment of a commodity or item. With large items, minimum dimension 50 cm, it is predicted that disinfestation will be achieved before the centre has reached −20°C.     

Clean development mechanism: a way to sustainable waste management in developing countries?

The Clean Development Mechanism established under the Kyoto Protocol allows investors in the developed world to invest in the developing world in return for emission credits. The CDM has two goals—to contribute to the reduction of emissions in the developed countries, and to promote sustainable development in the developing country. The objective of this paper is to analyze the project portfolio of 400 published CDM projects in the sector “waste handling and disposal” according to their project and technology characteristics.     

Enhancing institutional dynamics for multiple uses of water amidst climate‐related risks: The case of Lake Buhi,Philippines

This study examined the current governance system for Lake Buhi, Philippines. It describes stakeholder patterns of decision‐making, their roles in the decision‐making process based on their legal mandates, the manner of interactions, the sources of conflict and how these various issues are currently resolved. Stakeholders represent diverse interests, including irrigation, hydropower generation, fishery management and navigation. This study uses data generated from ten key informant interviews of the different stakeholders, information from five round table discussions, and secondary data and reports of various agencies. The results indicate that Lake Buhi and its watershed present classic man‐in‐nature governance challenges. The interplay of internal and external uncertainties regarding multiple uses results in a complex system that is difficult to effectively manage. Climate‐related hazards aggravate the pressures from activities within the lake watershed, complicating water allocation issues. The institutional arrangements that have emerged to address these challenges, however, appear to be fraught with overlaps, fragmentation and a lack of communication. It is thought these deficiencies could be addressed by establishing a lake basin council with representation from all the involved organizations, as well as any stakeholder groups not represented by organizations. The system of governance over the lake must address issues concerning water uses and access to the resource. The capacity of the organizations to participate in such an arrangement is weak, however, and capacity building is needed. The availability and sharing of data and information among stakeholders are also weak and must be strengthened if the work of the lake basin council is to be based on the best available information.     

Different preparative modes for the incorporation of additives in NR/SBR blends

Rubber goods usually require a combination of properties that cannot be provided by one elastomer only and then two or more polymer components have to be mixed to meet specific requirements. In such cases, the additives normally employed in rubber formulations are unevenly distributed, depending on the affinity of each compound to each polymeric phase. Thus, the dispersion of each one of these ingredients in the different rubbers will influence the rate and degree of vulcanization and, in consequence, the performance of the final composite. In this work, natural rubber (NR) and styrene butadiene rubber (SBR) were mixed in a 1 : 1 ratio. The compositions were obtained according to ASTM D 3182, by using four different preparative modes for the incorporation of the additives. After vulcanization, morphological, and dynamic mechanical thermal analysis, tensile strength, hardness, and tear resistance of each composition were investigated. The results show that the best properties were found when the NR/SBR mixture was prepared in such a way as to favor the vulcanization of the SBR phase while preserving the NR phase from excessive vulcanization. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 483–489, 2004