Nafion‐115/aromatic poly(etherimide) with isopropylidene groups/imidazole membranes for polymer fuel cells

Proton exchange membrane fuel cells (PEMFCs) with Pt/C gas diffusion electrodes and graphite single‐serpentine monopolar plates were constructed based on an aromatic poly(etherimide) with isopropylidene groups (PI)/imidazole (Im) and a popular Nafion‐115 matrix. The electrochemical properties of PEMFCs were tested at 25 and 60°C. The maximum power density of 171 mW/cm² and the maximum current density of 484 mA/cm² were detected for Nafion‐115/PI membrane. For both constructed PEMFCs the efficiency at 0.6 V was found about 41%. Immersion of Nafion‐115 in PI or PI/Im increased the thermal stability and mechanical properties of membranes. Thermal, mechanical properties and morphology of membranes were characterized by TGA, and AFM techniques including force spectroscopy. Interactions between the components in composite membranes were established by FT‐IR. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42436.     

Production of H<Subscript>2</Subscript>S and properties of sulfite reductase from selected strains of wine-producing yeasts

Correlation between H₂S productivity (p) and sulfite reductase activity (A) was estimated for seven wine-producing yeasts. It was described by a linear function p=f(A), the slope of which depended on the yeast strain. The most intensive H₂S synthesis by all the examined yeasts was observed within the early logarithmic growth phase, either in nitrogen abundance and SO₂ presence, or in nitrogen deficient and SO₂-free medium. Sulfite reductase from all the strains was optimally active at pH close to 7.4. The enzyme from cryophilic yeasts displayed maximum activity at approximately 16 °C, and from mesophiles at 22–26 °C. The preparations showed different affinities toward sulfite (K_m of 16.7–67.5 M). Values of activation energy in sulfite reduction depended on the yeast, and ranged from 14.07 to 67.04 kJ mol^–1.     

Characteristics of Polypeptide/Phospholipid Monolayers on Water and the Plasma-Activated Polyetheretherketone Support

Polyetheretherketone (PEEK) is a highly biocompatible polymer widely used in medicine as an implant production material. In this article, the PEEK surface was characterized in terms of its wettabillity properties after the physicochemical modifications by treatment with the low-temperature air plasma and covering with the Langmuir–Blodgett (LB) monolayers of polypeptide (cyclosporine A, CsA) and/or phospholipid (1,2-dipalmitoyl-sn-glycero-3-phosphocholine, DPPC). The LB deposition was preceded by the analysis of miscibility and morphology of monolayers at the air/water interface by means of the Langmuir technique and Brewster angle microscopy (BAM). Then, wettability of the polymer-supported films was evaluated by the contact angle measurements of three probe liquids of different characters (two polar—water and formamide, one apolar—diiodomethane). The measured contact angles allowed for determination of the surface free energy and its components based on the Lifshitz-van der Waals/acid–base (LWAB) approach. Some relations between the kind and magnitude of interactions within the model membranes on the water subphase and those of the PEEK-supported membranes with the liquids were found out. The results allowed obtaining the interesting models of biological coatings with potential applications.     

Serendipitous Identification of a Covalent Activator of Liver Pyruvate Kinase

Enzymes are effective biological catalysts that accelerate almost all metabolic reactions in living organisms. Synthetic modulators of enzymes are useful tools for the study of enzymatic reactions and can provide starting points for the design of new drugs. Here, we report on the discovery of a class of biologically active compounds that covalently modifies lysine residues in human liver pyruvate kinase (PKL), leading to allosteric activation of the enzyme (EC₅₀=0.29 μM). Surprisingly, the allosteric activation control point resides on the lysine residue K282 present in the catalytic site of PKL. These findings were confirmed by structural data, MS/MS experiments, and molecular modelling studies. Altogether, our study provides a molecular basis for the activation mechanism and establishes a framework for further development of human liver pyruvate kinase covalent activators.     

Biofunctionalized upconverting CaF<Subscript>2</Subscript>:Yb,Tm nanoparticles for <Emphasis Type="Italic">Candida albicans</Emphasis> detection and imaging

Versatile optimization of the synthesis method and composition of Yb3+ and Tm3+ co-doped CaF2 nanoparticles as well as a novel biofunctionalization method were developed and evaluated.Through multistep synthesis,the luminescence intensity of the Tm3+ activator was enhanced by more than 10-fold compared to standard one-step synthesis.The proposed methods were used to homogenously distribute the doping ions within the nanoparticle's volume and thus reduce luminescence quenching.Optimization of dopant ions concentration led to the selection of the most efficient visible and near-infrared up-converting nanoparticles,which were CaF2 doped with 10％ Yb3+ 0.05％ Tm3+ and 20％ Yb3+ 0.5％ Tm3+,respectively.To illustrate the suitability of the synthesized nanoparticles as bio-labels,a dedicated biofunctionalization method was used,and the nanoparticles were applied for labeling and imaging of Candida albicans cells.This method shows great promise because of extremely low background and high specificity because of the presence of the attached molecules.     

Influence of aluminium electrode preparation on PCE values of polymeric solar cells based on P3HT and PCBM

The main goal of the paper was investigation of influence of aluminum electrode preparation via thermal evaporation (TE) and the magnetron sputtering (MS) on power conversion efficiency (PCE) of polymeric solar cells. The photovoltaic properties of such three kinds devices based on poly(3-hexylthiophene-2,5-diyl) (P3HT) as ITO/P3HT/Al, ITO/P3HT:PCBM (1:1, w/w)/Al and ITO/PEDOT:PSS/P3HT:PCBM (1:1, w/w)/Al were investigated. For the constructed devices impedance spectroscopy were analyzed. For devices lack of PEDOT:PSS layer or lack of PCBM, photovoltaic parameters were very low and similar to the parameters obtained for device with Al electrode prepared by magnetron sputtering. The devices comprising PEDOT:PSS with P3HT:PCBM showed the best photovoltaic parameters such as a V_OC of 0.60 V, J_SC of 4.61 mA/cm², FF of 0.21, and PCE of 5.7 × 10^?1%.