Influence of aluminium electrode preparation on PCE values of polymeric solar cells based on P3HT and PCBM

The main goal of the paper was investigation of influence of aluminum electrode preparation via thermal evaporation (TE) and the magnetron sputtering (MS) on power conversion efficiency (PCE) of polymeric solar cells. The photovoltaic properties of such three kinds devices based on poly(3-hexylthiophene-2,5-diyl) (P3HT) as ITO/P3HT/Al, ITO/P3HT:PCBM (1:1, w/w)/Al and ITO/PEDOT:PSS/P3HT:PCBM (1:1, w/w)/Al were investigated. For the constructed devices impedance spectroscopy were analyzed. For devices lack of PEDOT:PSS layer or lack of PCBM, photovoltaic parameters were very low and similar to the parameters obtained for device with Al electrode prepared by magnetron sputtering. The devices comprising PEDOT:PSS with P3HT:PCBM showed the best photovoltaic parameters such as a V_OC of 0.60 V, J_SC of 4.61 mA/cm², FF of 0.21, and PCE of 5.7 × 10^?1%.     

Fabrication of nanoporous TiO2 by electrochemical anodization

The formation of self-organized porous titania is achieved by electrochemical anodization under a potentiostatic regime. Anodic titanium oxide (ATO) was fabricated by a three-step self-organized anodization of the Ti foil in an ethylene glycol electrolyte containing 0.38 wt% of NH₄F and 1.79 wt% of H₂O. Anodizing was carried out at the constant cell potential ranging from 30 to 70 V at the temperature of 20 °C. It was found that nanoporous TiO₂ arrays can be obtain only after a short duration of the third step (10 min). The influence of anodizing potential on the structural parameters of porous anodic titania including pore diameter, interpore distance, wall thickness, porosity and pore density was extensively studied. The linear dependencies between interpore distance, pore diameter and wall thickness upon the anodizing potential were found. The regularity of pore arrangement was monitored qualitatively by fast Fourier transforms (FFTs) of top-view FE-SEM images. It was found that the best arrangement of nanopores is observed at 40 V. This finding was confirmed by the analysis of pore circularity. The highest circularity of pores was observed once again at 40 V.     

Viscosity effects in the photopolymerization of two‐monomer systems

Photopolymerization kinetics and viscosity behavior of five different two‐monomer systems forming hydrogen bonds and composed of mixtures of a high viscosity monomer (HVM) and a low viscosity monomer (LVM) at various molar ratios were investigated at six polymerization temperatures. The monomers used were mono‐ or dimethacrylates. Detailed viscosity measurements of the monomer mixtures showed significant negative deviations from the theoretical values (characterized by excess logarithm viscosities) indicating that interactions between the molecules of the same type (in individual monomers) are stronger than those between two molecules of different types (HVM and LVM). The photopolymerization kinetics were analyzed from the point of view of the appearance, viscosity and temperature behavior of the most reactive composition (MRC), the one showing the highest value of the maximum polymerization rate within a range of the HVM: LVM ratios. It was found that MRC appearance is determined mainly by the initial viscosity of the two‐monomer system, whereas the functionality of the monomers (and network formation) is much less important (MRC is observed even in linear systems). The initial viscosity of all the monomer mixtures showing MRC lay in the range of 0.06–2 Pa s, which is narrow compared to the range of viscosities of the monomers (approximately 10^?3–10³ Pa s). © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Unusual Temperature Dependence of Heterogeneous Nucleation of Water Vapor on Ag Particles

Copyright 2013 American Association for Aerosol Research     

Thermal stability of poly(2-ethylhexyl acrylates) used as plasticizers for medical application

This article discusses thermal analysis of different molecular weight poly(2-ethylhexyl acrylates) synthesized by radical polymerization of 2-ethylhexyl acrylate. The main aim of this work was to investigate the thermal properties and degradation process of synthesized acrylic homopolymers and forming of thermal degradation products during their pyrolysis. As investigated method pyrolysis combined with gas chromatography was used. Poly(2-ethylhexyl acrylates) are used as plasticizers for pressure-sensitive adhesives applied in medical area.     

The Influence of Structural Parameters on the Reactivity of Model Complexes for Compound II: A Mini Review

The present brief review aims at elucidation of the parameters affecting the properties and reactivity of high valent iron(IV) oxo porphyrin complexes, being models of compound II reactive intermediate known from biochemistry of cytochromes and peroxidases. The stress is put on the influence of the axial ligand and porphyrin ring substituents, with special attention on implications for their catalytic activity.     

2-azaallylic rearrangement in homogeneous systems

In this work we present mechanism of the base-catalyzed 2-azaallylic rearrangement in homogeneous media. Detailed 2-azaallylic rearrangement studies have shown that tautomerism of derivatives of benzylidenebenzhydrylamines and N-fluorenylidenebenzylamines is not adequately encomposed by the Hammet equation and the equilibrium constant in the case of studied derivatives depends on the electronic as well as steric factors of the azaallylic system substituents. The presence of steric interactions which influence the equilibrium state has been additionally confirmed by means of crystallographic and molecular mechanics data as well as NOE studies. This revised version was published online in August 2006 with corrections to the Cover Date.     

N‐Oligo(3‐hydroxybutyrate)‐functionalized polypyrroles: towards bio‐erodible conducting copolymers

New copolymer materials have been prepared by chemical grafting of oligomeric 3‐hydroxybutyric acid (OHB) onto polypyrrole (PPy) derivatives. The influence of grafting density and molecular weight of OHB brushes on the physicochemical properties of prepared copolymers was investigated. PPy substrates were prepared by FeCl₃‐driven oxidative homopolymerization of N‐(2‐carboxyethyl)pyrrole or its copolymerization with pyrrole. The grafting method employed involved controlled anionic polymerization of β‐butyrolactone on pyrrole‐tethered potassium carboxylate active sites. Obtained PPy‐g‐OHB copolymers of varying grafting density and pendant polyester chain length were characterized and the observed structure–property relationships discussed. The impact of real time exposure to phosphate‐buffered saline environment was investigated and the residue products were characterized. Cross‐correlation of spectroscopic, thermal, electrical and elemental analysis data afforded comprehensive evaluation of the structure of prepared materials and their behaviour in hydrolytic medium. Erosion and degradation pathways have been identified, indicating ways to consciously tailor the physicochemical properties of these new biomimetic materials. © 2016 Society of Chemical Industry