Production of H<Subscript>2</Subscript>S and properties of sulfite reductase from selected strains of wine-producing yeasts

Correlation between H₂S productivity (p) and sulfite reductase activity (A) was estimated for seven wine-producing yeasts. It was described by a linear function p=f(A), the slope of which depended on the yeast strain. The most intensive H₂S synthesis by all the examined yeasts was observed within the early logarithmic growth phase, either in nitrogen abundance and SO₂ presence, or in nitrogen deficient and SO₂-free medium. Sulfite reductase from all the strains was optimally active at pH close to 7.4. The enzyme from cryophilic yeasts displayed maximum activity at approximately 16 °C, and from mesophiles at 22–26 °C. The preparations showed different affinities toward sulfite (K_m of 16.7–67.5 M). Values of activation energy in sulfite reduction depended on the yeast, and ranged from 14.07 to 67.04 kJ mol^–1.     

Characteristics of Polypeptide/Phospholipid Monolayers on Water and the Plasma-Activated Polyetheretherketone Support

Polyetheretherketone (PEEK) is a highly biocompatible polymer widely used in medicine as an implant production material. In this article, the PEEK surface was characterized in terms of its wettabillity properties after the physicochemical modifications by treatment with the low-temperature air plasma and covering with the Langmuir–Blodgett (LB) monolayers of polypeptide (cyclosporine A, CsA) and/or phospholipid (1,2-dipalmitoyl-sn-glycero-3-phosphocholine, DPPC). The LB deposition was preceded by the analysis of miscibility and morphology of monolayers at the air/water interface by means of the Langmuir technique and Brewster angle microscopy (BAM). Then, wettability of the polymer-supported films was evaluated by the contact angle measurements of three probe liquids of different characters (two polar—water and formamide, one apolar—diiodomethane). The measured contact angles allowed for determination of the surface free energy and its components based on the Lifshitz-van der Waals/acid–base (LWAB) approach. Some relations between the kind and magnitude of interactions within the model membranes on the water subphase and those of the PEEK-supported membranes with the liquids were found out. The results allowed obtaining the interesting models of biological coatings with potential applications.     

Serendipitous Identification of a Covalent Activator of Liver Pyruvate Kinase

Enzymes are effective biological catalysts that accelerate almost all metabolic reactions in living organisms. Synthetic modulators of enzymes are useful tools for the study of enzymatic reactions and can provide starting points for the design of new drugs. Here, we report on the discovery of a class of biologically active compounds that covalently modifies lysine residues in human liver pyruvate kinase (PKL), leading to allosteric activation of the enzyme (EC₅₀=0.29 μM). Surprisingly, the allosteric activation control point resides on the lysine residue K282 present in the catalytic site of PKL. These findings were confirmed by structural data, MS/MS experiments, and molecular modelling studies. Altogether, our study provides a molecular basis for the activation mechanism and establishes a framework for further development of human liver pyruvate kinase covalent activators.     

Biofunctionalized upconverting CaF<Subscript>2</Subscript>:Yb,Tm nanoparticles for <Emphasis Type="Italic">Candida albicans</Emphasis> detection and imaging

Versatile optimization of the synthesis method and composition of Yb3+ and Tm3+ co-doped CaF2 nanoparticles as well as a novel biofunctionalization method were developed and evaluated.Through multistep synthesis,the luminescence intensity of the Tm3+ activator was enhanced by more than 10-fold compared to standard one-step synthesis.The proposed methods were used to homogenously distribute the doping ions within the nanoparticle's volume and thus reduce luminescence quenching.Optimization of dopant ions concentration led to the selection of the most efficient visible and near-infrared up-converting nanoparticles,which were CaF2 doped with 10％ Yb3+ 0.05％ Tm3+ and 20％ Yb3+ 0.5％ Tm3+,respectively.To illustrate the suitability of the synthesized nanoparticles as bio-labels,a dedicated biofunctionalization method was used,and the nanoparticles were applied for labeling and imaging of Candida albicans cells.This method shows great promise because of extremely low background and high specificity because of the presence of the attached molecules.     

Influence of aluminium electrode preparation on PCE values of polymeric solar cells based on P3HT and PCBM

The main goal of the paper was investigation of influence of aluminum electrode preparation via thermal evaporation (TE) and the magnetron sputtering (MS) on power conversion efficiency (PCE) of polymeric solar cells. The photovoltaic properties of such three kinds devices based on poly(3-hexylthiophene-2,5-diyl) (P3HT) as ITO/P3HT/Al, ITO/P3HT:PCBM (1:1, w/w)/Al and ITO/PEDOT:PSS/P3HT:PCBM (1:1, w/w)/Al were investigated. For the constructed devices impedance spectroscopy were analyzed. For devices lack of PEDOT:PSS layer or lack of PCBM, photovoltaic parameters were very low and similar to the parameters obtained for device with Al electrode prepared by magnetron sputtering. The devices comprising PEDOT:PSS with P3HT:PCBM showed the best photovoltaic parameters such as a V_OC of 0.60 V, J_SC of 4.61 mA/cm², FF of 0.21, and PCE of 5.7 × 10^?1%.     

Clonal variation in reproductive response to temperature by a potential bulking control agent, Lecane inermis (Rotifera)

The novel idea of using rotifers Lecane inermis (Rotifera, Monogononta) as a tool to overcome activated sludge bulking generates an on-going need to study rotifer biology. The results of biological research on rotifers can serve to improve the method so that it can be most effective when applied in treatment plants. The aim of this study was to test the effect of temperature on four selected rotifer clones originating from different treatment plants. The rate of population development from a single individual (parthenogenetic female) during a 10-day experiment was measured at three temperatures: 8, 15 and 20 degrees C. The temperatures used reflect the annual temperature distribution in the majority of municipal wastewater treatment plants in the temperate zone. The growth rate coefficient (r) and doubling time (tD) were calculated for each clone. Under the most favourable conditions (20 degrees C), rvalues varied between 0.41 and 0.47 d and doubling time between 1.5 and 1.7 d. At a temperature of 15 degrees C, the doubling time was approximately two times longer (2.5-3.4 d). The strongest intraspecific variations were observed at the lowest temperature of 8 degrees C. At this temperature, one of the clones almost failed to proliferate, and another exhibited a doubling time of 7.9 d. The doubling times were a few times greater for the remaining two clones (60 d for Lk1, 33.3 d for Lk4). These results could be very useful in predicting the chances that the rotifers would survive in a biological reactor in a wastewater treatment plant at the temperatures used in these reactors.     

Assessment of cytotoxicity and immune compatibility of phytochemicals‐mediated biosynthesised silver nanoparticles using Cynara scolymus

The study was focused on the phytochemicals‐mediated biosynthesis of silver nanoparticles using leaf extracts and infusions from Cynara scolymus. To identify the antioxidant activity and total phenolic content, the 1,1‐diphenyl‐1‐picrylhydrazyl and Folin–Ciocalteau methods were applied, respectively. The formation and stability of the reduced silver ions were monitored by UV–vis spectrophotometer. The particle sizes of the silver nanoparticles were characterised using the dynamic light scattering technique and scanning electron microscope. The phase composition of the obtained silver nanoparticles was characterised by X‐ray diffraction. The silver nanoparticles suspension, artichoke infusion, and silver ions were separately tested towards potential cytotoxicity and pro‐inflammatory effect using mouse fibroblasts and human monocytes cell line, respectively. The total phenolic content and antioxidant activity of ethanol extract and infusion were found significantly higher as compared to aqueous extract and infusion. The UV–visible spectrophotometric analysis revealed the presence of the characteristic absorption band of the Ag nanoparticles. Moreover, it was found that with the increasing volume of plant extract, the average size of particles was increased. Biocompatibility results evidently showed that silver nanoparticles do not induce monocyte activation, however in order to avoid their cytotoxicity suspension at a concentration <2 ppm should be applied.Inspec keywords: pharmaceuticals, health and safety, renewable materials, toxicology, organic compounds, antibacterial activity, X‐ray diffraction, nanomedicine, nanoparticles, nanofabrication, suspensions, ultraviolet spectra, visible spectra, scanning electron microscopy, silver, particle sizeOther keywords: phytochemicals‐mediated biosynthesis, antioxidant activity, total phenolic content, dynamic light scattering technique, silver nanoparticles suspension, scanning electron microscopy, Cynara scolymus, 1,1 diphenyl‐1‐picrylhydrazyl method, cytotoxicity, immune compatibility, leaf extracts, UV‐vis spectrophotometry, particle size, Folin‐Ciocalteau methods, phase composition, X‐ray diffraction, artichoke infusion, pro‐inflammatory effect, mouse fibroblasts, human monocytes cell line, Ag     

Terahertz time domain spectroscopy of graphene and MXene polymer composites

The rising demand for faster and more efficient electronic devices forces electronics industry to shift toward terahertz frequencies. Therefore there is a growing need for efficient, lightweight, and easy to produce absorbing materials in the terahertz range for electromagnetic interference (EMI) shielding and related applications. This study presents a study on basic optical properties of two types polymer-based composites loaded with two-dimensional structures—graphene and MXene phases (Ti₂C). In said range, total EMI shielding efficiency (SE) and its components, the absorption coefficient (α ), refractive index, and complex dielectric function are investigated. The ratio of SE absorption component to reflection component (SE_ABS :SE_R ) of fabricated composites is equal or higher than 30:1 in over 80% of studied range. The fabricated composites exhibit low (<0.1) loss tangent in studied range. The addition of 1 wt% of graphene increases the composite α over 10-fold in respect to pure polymer–up to 60 cm⁻¹ for frequency higher than 2 THz.     

The Influence of Structural Parameters on the Reactivity of Model Complexes for Compound II: A Mini Review

The present brief review aims at elucidation of the parameters affecting the properties and reactivity of high valent iron(IV) oxo porphyrin complexes, being models of compound II reactive intermediate known from biochemistry of cytochromes and peroxidases. The stress is put on the influence of the axial ligand and porphyrin ring substituents, with special attention on implications for their catalytic activity.