Measurements of birefringent media properties using optical vortex birefringence compensator

We present some applications of the optical vortex birefringence compensator, based on the C polarization type singularities generated using two Wollaston compensators. The theory and experimental results of birefringent media properties measurements are presented. The possibility of the simultaneous measurement of both the azimuth angle and the phase retardance has been analyzed and experimentally verified.     

Phase Transitions in <Emphasis Type="Italic">Quasi</Emphasis>-One-Dimensional System with Unconventional Superconductivity

The paper is devoted to a study of superconducting properties of population-imbalanced fermionic mixtures in quasi-one-dimensional optical lattices. The system can be effectively described by the attractive Hubbard model with the Zeeman magnetic field term. We investigated the ground-state phase diagram of the model as a function of the chemical potential and the magnetic field. The ground state of the system exhibits the conventional BCS-type superconductivity as well as the unconventional so-called Fulde-Ferrell-Larkin-Ovchinnikov state, in which the total momentum of Cooper pairs is non-zero. We determine the orders of transitions as well as the behavior of order parameters with a change of the model parameters.     

Relaxation oscillations in a laser with a Gaussian mirror

We present an analysis of the relaxation oscillations in a laser with a Gaussian mirror by taking into account the three-dimensional spatial field distribution of the laser modes and the spatial hole burning effect. In particular, we discuss the influence of the Gaussian mirror peak reflectivity and a Gaussian parameter on the damping rate and frequency of the relaxation oscillation for two different laser structures, i.e., with a classically unstable resonator and a classically stable resonator.     

Materials Displaying Neural Growth Factor Gradients and Applications in Neural Differentiation of Embryoid Body Cells

The critical growth factor density required to support neural lineage generation from mouse embryonic stem cells is assessed by constructing a surface density gradient of immobilized nerve growth factor (NGF) from a plasma polymer film base. A chemical surface gradient varying from high hydroxyl group density to high aldehyde group density is prepared through diffusion‐controlled plasma polymerization of two monomers (ethanol and propionaldehyde) under a moving mask. NGF density gradients are then produced by reductive amination with the aldehyde groups on the plasma polymer surface. Mouse embryoid body derived (mEB) cell differentiation on the gradient surface is evaluated by immunofluorescence staining against Nestin. mEB cell density and the percentage of Nestin‐positive cells increase with increasing NGF density up to a critical value corresponding to 52.9 ng cm^?2, above which cell attachment and differentiation do not increase further. This gradient‐based screening approach allows the growth factor surface densities to be optimized for biomaterials intended for cell differentiation or expansion, which is highly relevant to creating efficient manufacture processes for cell therapies.     

Direct Holographic Patterning of ZnO

Zinc oxide thin films are holographically patterned on submicronic scale by direct photodissolution method. The photodissolution process in solution is highly sensitive in the UV range (355 nm). 1D and 2D nanostructures are successfully obtained by this photoresist‐free process. The kinetic of the reaction is studied by recording the transmitted intensity through the evolution of the ZnO film thickness along the reaction time. Application of an electrical potential strongly increases the dissolution rate (1.5 μm min^?1) and decreases the pattern formation time. As a first demonstration of the potential of all‐in liquid direct ZnO heterostructuring, selective growth of ZnO nanorods is performed by chemical bath deposition using holographically patterned ZnO films as a substrate.     

Ion–molecule reactions in mixtures of ethane with carbon tetrafluoride

Ion–molecule reactions have been measured for the ethane–carbon tetrafluoride mixtures of different compositions using a quadrupole mass spectrometer with a high-pressure ion source. Concentration of ethane in these mixtures ranged from 10% to 90% (at 10% increment). The following primary and secondary ions: CH₃⁺, F⁺, C₂H₃⁺, C₂H₄⁺, C₂H₅⁺, C₂H₆⁺, C₃H₅⁺, C₃H₇⁺, C₄H₇⁺, C₄H₉⁺, C₄H₁₀⁺, C₄H₁₁⁺ and CF₃⁺ were observed. Relative ion current intensities for primary and secondary ions are presented as a function both of total mixture pressure and concentration of carbon tetrafluoride in the mixture. Primary ions were produced by electrons with the energy of 300 eV. Potential of repeller electrode inside the ion source collision chamber was fixed at 5 V for all measurements. The total mixture pressure was changed from 0.7 to 26.6 Pa. Schemes of ion–molecule reactions were proposed.     

Planar Silicene: A New Silicon Allotrope Epitaxially Grown by Segregation

2D sheets of graphene‐like silicon, namely planar silicene, are synthesized. This new silicon allotrope is prepared on Au(111) thin films grown on a Si(111) substrate in the process of surface segregation. Owing to its almost perfectly flat geometry it shares the atomic structure with graphene rather than with low‐buckled silicene. Scanning tunneling microscopy measurements clearly display an atomically resolved planar silicene honeycomb lattice. Ab initio density functional theory calculations fully support the experimental findings and predict a pure sp² atomic configuration of Si atoms. The present work is the first experimental evidence of epitaxial planar silicene.     

Analysis of the Transient State in a Series Circuit of the Class $$RL_{\beta }C_{\alpha }$$

Results of analysis of transient states in a series circuit of the class \({RL}_{\beta }{C}_{\alpha }\), supplied by an ideal voltage source, have been described in the paper. This circuit consists of a coil \({L}_{\beta }\) and a supercapacitor \({C}_{\alpha }\) described by fractional-order differential equations. A method for determining the current and voltage waveforms in the analyzed circuit, based on the decomposition of rational functions into partial fractions, has been described. This method allows to determine transient waveform shapes in the system for any kind of voltage excitation. Two cases of the problem solutions have been considered. The first case concerns a situation where poles of rational functions are real, and the second where rational functions have complex poles. Effective relations enabling the determination of transient waveforms in a closed form have been given. Analytical formulae describing transient state waveforms in the system for different types of voltage excitations: constant, monoharmonic, periodic and arbitrary being an element of a Hilbert space, have been determined, too. The obtained results have been illustrated by an example.     

Multicolour micropatterning of thin films of dry gels

Micropatterning of surfaces with several chemicals at different spatial locations usually requires multiple stamping and registration steps. Here, we describe an experimental method based on reaction-diffusion phenomena that allows for simultaneous micropatterning of a substrate with several coloured chemicals. In this method, called wet stamping (WETS), aqueous solutions of two or more inorganic salts are delivered onto a film of dry, ionically doped gelatin from an agarose stamp patterned in bas relief. Once in conformal contact, these salts diffuse into the gelatin, where they react to give deeply coloured precipitates. Separation of colours in the plane of the surface is the consequence of the differences in the diffusion coefficients, the solubility products, and the amounts of different salts delivered from the stamp, and is faithfully reproduced by a theoretical model based on a system of reaction-diffusion partial differential equations. The multicolour micropatterns are useful as non-binary optical elements, and could potentially form the basis of new applications in microseparations and in controlled delivery.     

Effect of internal curing by using superabsorbent polymers (SAP) on autogenous shrinkage and other properties of a high-performance fine-grained concrete: results of a RILEM round-robin test

The article presents the results of a round-robin test performed by 13 international research groups (representing fifteen institutions) in the framework of the activities of the RILEM Technical Committee 225-SAP “Applications of Superabsorbent Polymers in Concrete Construction”. Two commercially available SAP materials were used for internal curing of a high-performance, fine-grained concrete in combination with the addition of extra water. The concrete had the same mix composition in all laboratories involved but was composed of local materials. All found a considerable decrease in autogenous shrinkage attributable to internal curing. Also, with regard to the shrinkage-mitigating effect of both particular SAP materials, the results were consistent. This demonstrates that internal curing using SAP is a robust approach, working independently of some variations in the concretes’ raw materials, production process, or measuring technique. Furthermore, the effects of internal curing on other properties of concrete in its fresh and hardened states were investigated. These are consistent as well and expand considerably the existing data basis on properties of concrete materials containing SAP.