Recently there has been tremendous progress made in the research of novel nanotechnology for future nanoelectronic applications. In particular, several emerging nanoelectronic devices such as carbon-nanotube field-effect transistors (FETs), Si nanowire FETs, and planar III-V compound semiconductor (e.g., InSb, InAs) FETs, all hold promise as potential device candidates to be integrated onto the silicon platform for enhancing circuit functionality and also for extending Moore's Law. For high-performance and low-power logic transistor applications, it is important that these research devices are frequently benchmarked against the existing Si logic transistor data in order to gauge the progress of research. In this paper, we use four key device metrics to compare these emerging nanoelectronic devices to the state-of-the-art planar and nonplanar Si logic transistors. These four metrics include: 1) CV/I or intrinsic gate delay versus physical gate length L/sub g/; 2) energy-delay product versus L/sub g/; 3) subthreshold slope versus L/sub g/; and 4) CV/I versus on-to-off-state current ratio I/sub ON//I/sub OFF/. The results of this benchmarking exercise indicate that while these novel nanoelectronic devices show promise and opportunities for future logic applications, there still remain shortcomings in the device characteristics and electrostatics that need to be overcome. We believe that benchmarking is a key element in accelerating the progress of nanotechnology research for logic transistor applications. 相似文献
Synthesis and optical transmission of MgB2 thin films on optically transparent glass are reported. In the 400–1000 nm regime as deposited films show high metallic reflectivity
and very little transmission. After deposition, the films were annealed ex situ and rendered superconducting with Tc of 38 K, approaching that of the bulk material. The reaction conditions where quite soft ∼10 min at 550°C. The optical absorption
coefficient, α and photon energy, E followed a Tauc-type behavior,
= _T (E - E_g )(\alpha E)^{1/2} = \beta _T (E - E_{\rm g} ). The band gap (Eg) was observed to peak at 2.5 eV; but, the slope parameter βT behaved monotonically with reaction temperature. Our results indicate that an intermediate semiconducting phase is produced
before the formation of the superconducting phase; also optical measurements provide valuable information in monitoring the
synthesis of MgB2 from its metallic constituents. In addition these films have interesting optical properties that may be integrated into optoelectronics. 相似文献
Tip wear of silicon probes used for an atomic force microscope (AFM) is a critical issue. Wear can result in an increase of
tip radius and adhesion between tip and sample, thus reducing the image resolution and introducing artifacts. In order to
reduce adhesion, friction, and wear so as to reduce tip related artifacts, liquid lubricant (Z-TETRAOL), self-assembled monolayers
(pentafluorophenyltriethoxysilane (PFPTES)), and fluorocarbon polymer (Fluorinert™) were applied on the silicon probe. A comprehensive
investigation of adhesion, friction, and wear of the uncoated/coated tips in both ambient air and various humidity levels
as well as the influence of the coatings on the image resolution was performed. Experiments showed that the coatings reduced
the adhesion, friction, and wear of the silicon tip, improved the initial image resolution, and exhibited less deterioration
as compared to that of uncoated tip in the long-term test. 相似文献
Healthy hair and skin is highly desired. Characterization of their morphological, frictional, and adhesive properties (tribological properties) is essential to enhance understanding of hair and skin and to advance the science. Literature on the tribological characterization of hair and skin is scarce to date. The paper presents nanotribological data and analysis on hair (Caucasian, Asian, and African hair at virgin, chemo-mechanically damaged, and treated conditions) and synthetic hair and skin, as well as roughness data of human skin replica. Roughness statistics are presented to characterize the vertical and spatial surface parameters. Average coefficient of friction values were determined for each ethnicity and hair type, and are discussed. The directionality dependence of friction is also discussed. Magnitude and spatial distribution of adhesive force are used to estimate thickness and distribution of the conditioner film. 相似文献
We report on the development of an electrostatic ion trap for high-resolution mass spectrometry. The trap works on purely electrostatic fields and hence trapping and storing of ions is not mass restrictive, unlike other techniques based on Penning, Paul, or radio frequency quadrupole ion traps. It allows simultaneous trapping and studying of multiple mass species over a large mass range. Mass spectra were recorded in "dispersive" and "self-bunching" modes of ions. Storage lifetimes of about 100 ms and mass resolving power of about 20,000 could be achieved from the fifth harmonic Fourier transform spectrum of Xe ions recorded in the self-bunching mode. 相似文献
Porous titanium (Ti) and its alloys are promising materials for orthopedic applications due to their low elastic modulus, high strength, excellent corrosion resistance, and biocompatibility. In this study, the porous Ti–xNb–5Ag (x = 25, 30 and 35 wt%) alloys were synthesized using the powder metallurgy approach. The effects of Nb content on the porosity, mechanical properties, and electrochemical corrosion behavior of the alloys were investigated. XRD analysis revealed that the porous alloys mainly consist of α-Ti, β-Ti, intermetallic compound (Ti4Nb), and oxides of TiO2 and NbO phases. Porous alloys possess the porosity ranging from 57 to 65%, due to the addition of NH4HCO3 (45 wt%). Increase in Nb content lead to a reduction in the elastic modulus and compression strengths of the sintered porous Ti–xNb–5Ag alloys. All three developed porous Ti–xNb–5Ag alloys show the optimum combination of elastic modulus and compression strength, which is suitable for orthopedic applications. These porous alloys exhibit excellent electrochemical corrosion resistance in the simulated body fluids, and the samples having low porosity exhibit higher corrosion resistance than high-porosity samples.
Since the very first resolution of racemic tartaric acid by Pasteur, the importance of resolution and methodology has been on a path of continuous understanding and expansion. The science and chemistry of achieving such targets has changed a lot. The advent of chromatography changed the direction by involving synthetic, semisynthetic, or naturally occurring chiral materials for a direct approach to resolution, where rapid and reversible association occurs to form diastereomers with different stabilities and partition coefficients responsible for overall enantioseparation. It has now reached a stage where the separation of excess enantiomers from nonracemic mixtures has been achieved in a totally achiral environment, which does not appear to be in line with the prevalent concepts of basic stereochemistry. Caution should be exercised when enantiomerically enriched mixtures – obtained by enantioselective synthesis – are chromatographed for purification in preparative organic synthesis. 相似文献
This paper presents a new design of multi micro manipulation system using ionic polymer metal composite (IPMC) micro grippers for robotic micro assembly where IPMC is used as a light weight actuator for developing the micro grippers. It has the potential of large displacement, low mass force generation and misalignment compensation ability during micro manipulation. These capabilities are utilized for handling of miniature parts like pegs. The analysis of IPMC micro gripper and manipulator are carried out for developing a multi micro manipulation system that can handle pegs in micro assembly operation for shifting one to another hole position in a large work space (100 mm × 100 mm). By developing a prototype, it is demonstrated that IPMC based micro grippers are capable of handling the peg-in-hole assembly tasks in a multi micro manipulation system. 相似文献
Background: The present study is to investigate the neuroprotective effect of ibuprofen by intranasal administration of mucoadhesive microemulsion (MMEI) against inflammation-mediated by dopaminergic neurodegeneration in 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) model of Parkinson’s disease (PD).Methods: Ibuprofen-loaded polycarbophil-based MMEI was developed by using response surface methodology (RSM). Ibuprofen with dose of 2.86 mg/kg/day was administered intranasally to male C57BL/6 mice for two consecutive weeks which were pre-treated with four intraperitoneal injections of MPTP (20?mg/kg of body weight) at 2?h intervals. Immunohistochemistry was performed.Results: Optimal MMEI was stable and non-ciliotoxic with 66.29?±?4.15?nm as average globule size and??20.9?±?3.98?mV as zeta potential. PDI value and transmission electron microscopy result showed the narrow globule size distribution of MMEI. The result showed that all three independent variables had a significant effect (p?<?0.05) on the responses. Rota-rod and open-field test findings revealed the significant improvement in motor performance and gross behavioral activity of the mice. The results from in vivo study and immunohistochemistry showed that nasal administration of Ibuprofen significantly reduced the MPTP-mediated dopamine depletion. Furthermore TH neurons count in the substantia nigra and the density of striatal dopaminergic nerve terminals were found to be significant higher for ibuprofen treated groups.Conclusion: Findings of the investigation revealed that Ibuprofen through developed MMEI was shown to protect neurons against MPTP-induced injury in the Substantia nigra pars compacta (SNpc) and striatum and hence, could be a promising approach for brain targeting of Ibuprofen through intranasal route to treat PD. 相似文献