Pervaporative removal of acrylonitrile from aqueous streams through polydimethylsiloxane membrane

This study describes the successful separation of acrylonitrile (ACN) from dilute aqueous streams using pervaporation process. The influences of ACN feed concentration, permeate pressure, operating temperature, feed flow rate and membrane thickness on the membrane separation performance were investigated. The results showed that with an increase in ACN concentration in the feed solution, the permeation flux of ACN increased while the enrichment factor decreased. It was also indicated that increasing the permeate pressure reduced the driving force for mass transfer and consequently the permeation flux dropped while the enrichment factor enhanced. Polydimethylsiloxane membranes used in this study showed very good properties in the separation process, leading to enrichment factors in the range of 70-140. Furthermore, the activation energy for pervaporation of both ACN and water calculated from Arrhenius plot indicated that the permeation of water through the membrane was more temperature dependant than ACN.     

The Effect of a Magnetic Field on the Melting of Gallium in a Rectangular Cavity

The role of magnetic field and natural convection on the solid–liquid interface motion, flow, and heat transfer during melting of gallium on a vertical wall is reported in this paper. The classical geometry consisting of a rectangular cavity with uniform but different temperatures imposed at two opposite side walls, insulated top, and bottom walls is considered. The magnetic field is imposed in the horizontal direction. A numerical code is developed to solve for natural convection coupled to solid–liquid phase transition and magnetic effects. The corresponding streamlines and isotherms predicted by the numerical model serve to visualize the complicated flow and temperature field. The interplay between the conduction and convection modes of heat transfer stimulated by the combination of the buoyancy-driven flow and the Lorentz force on the fluid due to the magnetic field are studied. The results show that the increase of Rayleigh number promotes heat transfer by convection, while the increase of Hartmann number dampens the strength of circulating convective currents and the heat transfer is then mainly due to heat conduction. These results are applicable in general to electrically conducting fluids and we show that magnetic field is a vital external control parameter in solid–liquid interface motion.     

Vernacular architecture: questions of comfort and practicability

A paradoxical situation exists where vernacular building traditions are in a state of decline and are being replaced by modern counterparts, but they are repeatedly cited in the academic literature as exemplary models of environmental practice. This paradox is examined through research on whether vernacular passive cooling systems in the hot and dry climates of present-day Iran are practicable for the provision of comfortable indoor temperatures. Investigating their technical thermal performance as well as user perceptions and behaviour, positive and negative attributes of the cooling systems are identified. If conclusions about the long-term viability of vernacular buildings are to be drawn, then social, cultural, economic and environmental attributes need to be taken into consideration. Despite rather widespread and persistent assumptions, vernacular building traditions are not necessarily able to survive and the choices made by local people regarding the continuation or abandonment of specific traditions are influenced by a variety of cultural and practical factors. This substantiates the necessity of an integrated and holistic approach that engages with these variables in order to acquire a better understanding of the conditions for the survival of vernacular traditions.

Le fait que les traditions architecturales vernaculaires se trouvent dans un état de déclin et sont remplacées par leurs équivalents modernes, alors même qu'elles sont citées à maintes reprises dans la littérature universitaire comme des modèles exemplaires de pratique environnementale, constitue une situation paradoxale. Ce paradoxe est étudié au travers de recherches visant à déterminer si les systèmes de refroidissement passif vernaculaires sous les climats chauds et secs de l'Iran d'aujourd'hui peuvent être mis en pratique pour assurer des températures intérieures confortables. L’étude de leurs performances thermiques techniques aussi bien que des perceptions et du comportement des utilisateurs permet d'identifier les attributs positifs et négatifs des systèmes de refroidissement. S'il faut tirer des conclusions concernant la viabilité à long terme des bâtiments vernaculaires, il est alors nécessaire de prendre en considération les attributs sociaux, culturels, économiques et environnementaux. En dépit de présomptions plutôt répandues et tenaces, les traditions architecturales vernaculaires ne sont pas nécessairement capables de survivre et les choix opérés par les populations locales quant à la poursuite ou l'abandon de traditions spécifiques sont influencés par divers facteurs culturels et pratiques. Ceci confirme la nécessité d'une approche intégrée et holistique qui, par ces variables, incite à acquérir une meilleure compréhension des conditions propres à assurer la survie des traditions vernaculaires.

Mots clés: confort adaptatif, performances des bâtiments, attentes, traditions locales, occupants, refroidissement passif, architecture vernaculaire, Iran     

One-pot synthesis of hematite-alumina hollow sphere composite by ultrasonic spray pyrolysis technique with high adsorption capacity toward PAHs

A hybrid nanocomposite of alumina and hematite was synthesized by ultrasonic spray pyrolysis technique. The study of microscopic images, mapping analysis, and XRD patterns revealed that the Al₂O₃ – Fe₂O₃ nanocomposite was composed of separated spherical particles with a thin layer ball-shaped structure that metal oxides are uniformly distributed in the wall of hollow sphere particles, led to a coherent and monotonous construction. A series of coefficients of equilibrium sorption of polycyclic aromatic hydrocarbons (PAHs) as hazardous materials were measured on the prepared composite material in a batch technique. The free or pure Al₂O₃ or Fe₂O₃ showed negligible removal efficiency for the mentioned analytes. The various significant variables, such as initial analyte concentration, solution pH, adsorbent dose, and contact time to remove analyte, were studied in the aqueous solutions. Adsorption data were modeled to Langmuir, Freundlich, and Temkin isotherms, and a good correlation found in the case of Langmuir isotherm and adsorption capacity for anthracene, phenanthrene, and naphthalene were 370, 333, and 322 mg g^?1, respectively. Investigation of the kinetic models proved a pseudo-second-order, and the prepared adsorbent can be reused more than 7 times without a significant decrease of adsorption performance.     

A study on in vitro release of five brands of phenytoin capsules, marketed in iran

In relation to the new pharmaceutical system in Iran, the in vitro release of five brands of 100 mg phenytoin sodium capsules, namely A,B,C,D & E were determined in distilled water. using three dissolution methods, i.e. Rotating basket, Magnetic basket and Levy beaker method. Also the average amount of phenytoin content of each brand was measured.

The results showed that although the dissolution rate of each product is different by each method, but the pattern of drug release is more or less similar.

The dissolution time for products C and D is much longer than those of products A,B & C with all methods, but the dissolution behaviour of capsules C & D is not equivalent to those of standard “slow release” phenytoin capsules. The release pattern of products A & E are similar to those of standard “fast release” phenytoin capsules. The dissolution of product B is poor and not acceptable.     

In-situ study of the carbon nanotube yarn drawing process

Recognizing the main factors affecting the spinning of carbon nanotube (CNT) yarns from vertically aligned brush-like CNTs (BCNTs) persists as a difficult challenge. Here, using in-situ drawing of as few as 20 CNTs from as-grown BCNT and measuring the force required for their separation from BCNT, we demonstrate that samples with different spinnability levels exhibit different separation force behaviors. Moreover, the average separation force per CNT differs among samples. Results show that the separation force in spinnable samples depends on the drawing location: it can be as high as 15 nN/CNT at the top of a sample and as low as 3 nN/CNT in the middle of a sample. In contrast, this force is around 10 nN/CNT for un-spinnable samples and is nearly constant throughout such samples. Detailed drawing site observations can pave the way to elucidation of the mechanisms of dry drawing processes of BCNT, which are vital for enhancing the strength of carbon nanotube yarns.     

Reducing the crystallinity of high molecular weight poly (ethylene oxide) using ultraviolet cross-linking for preparation of gas separation membranes

CO₂-selective cross-linked poly (ethylene oxide) (PEO) membranes were prepared by the UV irradiation of high molecular weight PEO in the presence of benzophenone as photo-initiator, which act as a hydrogen-abstracting agent. The main goal was to study the effects of the cross-linking process on the structural properties of hydrogel films intended for the gas separation applications. It was found that the gel fraction, and cross-link density enhanced, and the crystallinity, and the size of spherulites decreased by the cross-linking process. Moreover, the permeation performances for N₂, O₂, CH₄, and CO₂ and the relationship between the gas permeation performances and physical properties were investigated. The results indicated that the degree of cross-linking and crystallinity could be controlled by changing the initiator concentration, as by increasing the initiator content, the crystallinity percent and gas permeability of the membranes decreased, and the gas pair ideal selectivity of CO₂/N₂, CO₂/CH₄, CH₄/N₂, and O₂/N₂ increased.     

‐based optimal sparse sliding mode control for networked control systems

This paper is devoted to the problem of designing a sparsely distributed sliding mode control for networked systems. Indeed, this note uses a distributed sliding mode control framework by exploiting (some of) other subsystems' information to improve the performance of each local controller so that it can widen the applicability region of the given scheme. To do so, different from the traditional schemes in the literature, a novel approach is proposed to design the sliding surface, in which the level of required control effort is taken into account during the sliding surface design based on the control. We then use this novel scheme to provide an innovative less‐complex procedure that explores sparse control networks to satisfy the underlying control objective. Besides, the proposed scheme to design the sliding surface makes it possible to avoid unbounded growth of control effort during the sparsification of the control network structure. Illustrative examples are presented to show the effectiveness of the proposed approach.     

The use of new intelligent techniques in designing retaining walls

Engineering with Computers - The stability of retaining walls against overturning is analyzed in this study using artificial intelligence methods. Five input parameters including wall height, wall...