The effects of pressure on the isothermal fluid behavior of bituminous coals

An investigation into the effects of pressure (helium gas) on the isothermal fluid behavior includes: (1) the effect of pressure on the rate of melting and coking as evidenced by the rate constants k(melt) and k(coke); (2) the effect of pressure on the energies of activation of melting and coking; (3) the effects of pressure on the characteristic times; (4) the effects of pressure on the maximum isothermal fluidity. Results from the effects of pressure on k(melt) revealed that it was generally the high total sulfur, low nitrogen, low reactives/mineral matter ratio, medium rank coals which show the greatest increase in k(melt), whereas the highest rank coals show the least decrease in k(coke). The energies of activation of melting and coking were not significantly affected by pressure. The investigation also reveals increases or decreases in the respective times of softening, maximum fluidity, resolidification and total time of fluid behavior under isothermal pressurized conditions. There appears the possibility that these shifts may be rank dependent. Additionally, the lower rank coals show the largest relative increase in their fluidities when subjected to pressure. Empirical relationships were derived in order to quantitatively predict the maximum isothermal fluidity for most (fluid) coals at a given pressure.     

Single- and multiobjective evolutionary optimization assisted by Gaussian random field metamodels

This paper presents and analyzes in detail an efficient search method based on evolutionary algorithms (EA) assisted by local Gaussian random field metamodels (GRFM). It is created for the use in optimization problems with one (or many) computationally expensive evaluation function(s). The role of GRFM is to predict objective function values for new candidate solutions by exploiting information recorded during previous evaluations. Moreover, GRFM are able to provide estimates of the confidence of their predictions. Predictions and their confidence intervals predicted by GRFM are used by the metamodel assisted EA. It selects the promising members in each generation and carries out exact, costly evaluations only for them. The extensive use of the uncertainty information of predictions for screening the candidate solutions makes it possible to significantly reduce the computational cost of singleand multiobjective EA. This is adequately demonstrated in this paper by means of mathematical test cases and a multipoint airfoil design in aerodynamics.     

International Working Group on Assurance Cases (for Security)

Critical systems are aptly named - from electric power to water and gas to the telephone system and the Internet, they're all critical to some aspect of our daily lives. We're a networked society and as such, it's important to both know whether critical systems are trustworthy and be able to communicate, review, and debate the level of trust achieved in them. In the safety domain, explicit safety cases are increasingly required by law, regulations, and standards. In this article, we outline what a small, international group of experts, spanning various disciplines in safety, security, reliability, and critical infrastructure, been doing with the International Working Group on Assurance Cases (for Security), what we hope to achieve, and where we go next.     

Systematic characterization of Cl2 reactive ion etchingfor improved ohmics in AlGaN/GaN HEMTs

Pre-metal-deposition reactive ion etching (RIE) was performed on an Al_0.3Ga_0.7N/AlN/GaN heterostructure in order to improve the metal-to-semiconductor contact resistance. An optimum AlGaN thickness for minimizing contact resistance was determined. An initial decrease in contact resistance with etching time was explained in terms of removal of an oxide surface layer and/or by an increase in tunnelling current with the decrease of the AlGaN thickness. The presence of a dissimilar surface layer was confirmed by an initial nonuniform etch depth rate. An increase in contact resistance for deeper etches was experienced. The increase was related to depletion of the two-dimensional (2-D) electron gas (2-DEG) under the ohmics. Etch depths were measured by atomic force microscopy (AFM). The contact resistance decreased from about 0.45 Ωmm for unetched ohmics to a minimum of 0.27 Ωmm for 70 Å etched ohmics. The initial thickness of the AlGaN layer was 250 Å. The decrease in contact resistance, without excessive complications on device processing, supports RIE etching as a viable solution to improve ohmic contact resistance in AlGaN/GaN HEMTs     

Adaptive cell division for ray tracing

In ray tracing the two most commonly used data structures are the octree and uniform cell division. The octree structure allows efficient adaptive subdivision of space, while taking care of the spatial coherence of the objects in it; however, the tree structure locating the next node in the path of a ray is complex and time consuming. The cell structure, on the other hand, can be stored in a three-dimensional array, and each cell can be efficiently accessed by specifying three indices. However, such a uniform cell division does not take care of object coherence. The proposed data structure combines the positive features of the above data structures while minimising their disadvantages. The entire object space is implicitly assumed to be a three-dimensional grid of cells. Initially, the entire object space is a single voxel which later undergoes “adaptive cell division.” But, unlike in the octree structure, where each voxel is divided exactly at the middle of each dimension, in adaptive cell division, each voxel is divided at the nearest cell boundary. The result is that each voxel contains an integral number of cells along each axis. Corresponding to the implicit cell division we maintain a three-dimensional array, with each array element containing the voxel number which is used to index into the voxel array. The voxel array is used to store information about the structure of each voxel, in particular, the objects in each voxel. While a ray moves from one voxel to another we always keep track of the cell through which the ray is currently passing. Since only arrays are involved in accessing the next voxel in the path of the ray, the operation is very efficient.     

Finite-element grid improvement by minimization of stiffness matrix trace

A new and simple method of finite-element grid improvement is presented. The objective is to improve the accuracy of the analysis. The procedure is based on a minimization of the trace of the stiffness matrix. For a broad class of problems this minimization is seen to be equivalent to minimizing the potential energy. The method is illustrated with the classical tapered bar problem examined earlier by Prager and Masur. Identical results are obtained.