Radiation polymerization of acrylonitrile in a viscous system with styrene

Radiation polymerization of acrylonitrile in a viscous system with styrene was performed at ambient temperature by using γ‐rays. It is found that the overall rate of polymerization was accelerated after critical conversion due to the gel effect. As the molar fraction of styrene in monomer feed (f_St) is increased, both the total polymer conversion and molar fraction of acrylonitrile in the copolymer feed (F_AN) were decreased. The monomer reactivity ratios for acrylonitrile and styerne were determined to be r₁ (AN) = 0.25 and r₂ (St) = 2.0, respectively. The copolymers obtained were characterized by Fourier transformed infrared spectra (FTIR), X‐ray diffraction (XRD), scanning electron microscopy (SEM), ¹H‐NMR, and pyrolysis mass spectrometry (PMS). It was found that the slight addition of styrene to acrylonitrile strongly changes crystallinity, morphology, and thermal decomposition of the resulting polymer. ¹H‐NMR measurment of AN/St copolymer showed the appearance of aromatic proton signals and shifted the resonance of the methylene proton to lower chemical shifts. The mass spectra of AN/St copolymers showed fragments of pyrolysates corresponding to oligonitriles with styrene end groups. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 268–275, 2002; DOI 10.1002/app.10324     

Traffic classification and scheduling in ATM networks

Virtual paths (VPs) are an integral part of the resource management and control hierarchy of ATM (asynchronous transfer mode) networks. To improve the utilization of network resources and facilitate management and control, source types are organized into traffic classes. Each traffic class is transported by its own virtual path subnetwork. In this paper, we consider issues related to the design of traffic classes. We consider an ATM switch node to which cells arrive from a diverse set of source types. Traffic classes are assumed to be served according to a weighted round robin policy, while cells belonging to a given traffic class are served in first-come-first-served order. We consider the problem of determining the optimal set of traffic classes. Under suitable simplifying assumptions, it is shown that the above problem can be modeled as a set-partitioning problem. The structure of the problem at hand is then exploited to develop an efficient heuristic. Several examples are given to illustrate the developed methodology.Supported partially through NSF Grant NCR-891447 and AT&T Grant 5-23690.     

Modified tracking loop for DS spread spectrum systems

A nonconventional pseudo-noise (PN) code tracking loop for direct sequence (DS) spread spectrum systems is presented. It solves problems of component imbalance while maintaining hardware simplicity.<>     

Low-temperature unit-cell parameters of La1−x Pr x CaBaCu3O7 compounds

The suppression of the superconductivity by praseodymium in La_1−x Pr _x CaBaCu₃O₇ may be explained in terms of the difference in the electronic or crystal structure between these compounds. Three compositions with x=0.0, 0.5, 1.0 were, therefore, investigated by X-ray diffraction in order to determine the unit-cell dimensions at room temperature as well as at lower temperatures down to 5 K. The results showed no considerable changes in the orthorhombic unit-cell dimensions on decreasing the temperature to 5 K. Unit-cell volumes at low temperatures were 0.99 of the room temperature values. The intensity sequence of reflections in the diffraction pattern was the same for all samples throughout the range of temperature studied.     

Cracking orientation and induced anisotropy of a ceramic matrix composite under off-axis loading

The effect of matrix microcracking on the stiffnesses of a carbon-fibre/SiC-matrix woven composite is studied by means of an ultrasonic method. It provides the whole set of the stiffness tensor coefficients which are inaccessible by classical strain measurements and which are required to identify anisotropic damage. The induced anisotropy depends on the loading direction. If a tensile solicitation in a fibre direction leads to stiffnesses decreases without any rotation of principal axes, a tensile solicitation of 45° from a fibre direction creates microcracks with a predominant orientation that does not coincide with the elastic symmetry axes, and induce a fully anisotropic elastic degradation.     

MC-CDMA with exponential power profile in Nakagami fading channel

A refined study of multi-carrier code division multiple access transmission over a Nakagami fading channel is proposed. The channel power is modeled with an exponential power profile rather than the uniform profile prevalent in other papers. An expression for the bit error rate (BER) is then derived. Numerical results show that MC-CDMA performances depend on the power dispersion of interferers around the desired user power.     

New mechanisms in photo-assisted MOVPE of II-VI semiconductors

The first detailed comparison has been made of the metalorganic vapor phase epitaxy growth rates of CdTe, ZnTe, and ZnSe, measured in situ with laser reflectometry. The comparison also includes the photo-assisted growth with visible radiation from an argon ion laser. Using a standard Group II precursor (DMCd or DMZn.TEN) partial pressure of 1.5 × 10⁻⁴ atm, VI/II ratio of 1 and DIPM (M = Te, Se) the maximum growth rates are in the region of 10 to 15 AU/ s. Decrease in growth rates of ZnTe at higher temperatures or higher laser powers have been attributed to the desorption from the substrate of unreacted Te precursor. The behavior of DTBSe is quite different from DIPSe for both pyrolytic and photo-assisted growth. The maximum growth rate is around 1 AU/ s with very little photo-enhancement, except at 300°C. Secondary ion mass spectroscopy analysis of hydrogen concentration in the ZnSe layers shows high concentrations, up to 5.9 × 10¹⁹ atoms cm⁻³ for DTBSe grown ZnSe under pyrolytic conditions. These results show that the growth kinetics play an important part in the incorporation of hydrogen and passivation of acceptor doped material.     

Transport of arginine and ornithine into isolated mitochondria of Saccharomyces cerevisiae

In this work we have characterised the transport of L-arginine and L-ornithine into mitochondria isolated from a wild-type Saccharomyces cerevisiae strain and an isogenic arg11 knock-out mutant. The Arg11 protein (Arg11p) is a mitochondrial carrier required for arginine biosynthesis [Crabeel, M., Soetens, O., De Rijcke, M., Pratiwi, R. & Pankiewicz, R. (1996) J. Biol. Chem. 271, 25011-25019]. Reconstitution experiments have confirmed that it is an L-ornithine carrier also transporting L-arginine and L-lysine by order of decreasing affinity, but not L-histidine [Palmieri, L., De Marco, V., Iacobazzi, V., Palmieri, F., Runswick, M. & Walker, J. (1997) FEBS Lett. 410, 447-451]. Evidence is presented here that the mitochondrial inner membrane contains an L-arginine and L-ornithine transporting system distinct from Arg11p, in keeping with the arginine leaky phenotype of arg11 knock-out mutants. The newly characterised carrier, which we propose to name Bac1p (basic amino acid carrier), behaves as an antiporter catalysing the electroneutral exchange of the basic amino acids L-arginine, L-lysine, L-ornithine and L-histidine and displays the highest affinity for L-arginine (Km of 30 microM). L-Arginine uptake has a pH optimum in the range of 7.5-9 and is inhibited by several sulphydryl reagents, by pyridoxal 5'-phosphate and by cations.