Entropy production due to free convection in partially heated isosceles triangular enclosures

A numerical analysis of the entropy production has been performed due to natural convection heat transfer and fluid flow in isosceles triangular enclosures with partially heated from below and symmetrically cooled from sloping walls. Governing equations are solved by finite difference method. Governing parameters on flow and temperature fields are Rayleigh number (10³  Ra  8.8 × 10⁵), dimensionless length of heater (0.25  (ℓ′ = ℓ/L)  1.0), dimensionless location of heater (0.25  (c′ = c/L)  0.75) and inclination angle of slopping walls (30°  β  60°). Heat transfer results are presented in terms of local and mean Nusselt numbers (Nu) while entropy production results are shown with entropy production number (N_s) and Bejan number (Be). Isotherms, streamlines, contours of entropy production due to heat transfer and fluid friction irreversibility are plotted. It is observed that entropy production number increases but Bejan number decreases with increasing of Rayleigh number. However, both entropy production due to heat transfer and fluid friction irreversibility are affected by higher inclination angle of triangle and length of heater.     

Mechanical properties of a reinforced composite polymer electrolyte membrane and its simulated performance in PEM fuel cells

The hygro-thermo-mechanical properties and response of a class of reinforced perfluorosulfonic acid membranes (PFSA), that has potential application as an electrolyte in polymer fuel cells, are investigated through both experimental and numerical modeling means. A critical set of material properties, including Young's modulus, proportional limit stress, break stress and break strain, is determined for a range of temperature and humidity levels in a custom-built environmental test apparatus. The swelling strains are also determined as functions of temperature and humidity level. To elucidate the mechanical response and the potential effect these properties have on the mechanical durability, mechanics-based simulations are performed using the finite element method (ABAQUS). The results indicate that the relatively high strength of the experimental membrane, in combination with its relatively low in-plane swelling due to water absorption, should have a positive influence on membrane durability, potentially leading to longer life times for polymer electrolyte membrane fuel cells (PEMFC).     

功率密度对VHF-PECVD制备μc-Si:H的影响

在不同功率密度下用甚高频化学气相沉积(VHF-PECVD)法制备了一系列微晶硅(μc-Si:H)薄膜,并对薄膜的微观结构进行了研究.重点研究了在较低的功率密度下,功率密度的改变对薄膜沉积速率和结晶状况的影响.结果表明,随着功率密度的提高,沉积速率逐渐加大,进一步提高功率密度时,沉积速率趋于饱和;与此同时,薄膜的孵化层厚度和形核密度随功率密度而变化.     

Investigation of Enhancement Band Using Double Screen Frequency Selective Surfaces with Koch Fractal Geometry at Millimeter Wave Range

Numerical and theoretical investigations are presented for a double screen frequency selective surface (DSFSS) with perfectly conducting Koch fractal patch elements. The work was developed in two steps, in the first step two Koch fractal FSS screens were designed using the commercial software Ansoft Designer^TM. In the second these FSS were cascaded and separated by an air gap layer, forming the so-called DSFSS, to improve the bandwidth behavior. Thereafter, a numerical cascading technique is used to analyze the effect of the air gap on the DSFSS. The results were compared and a good agreement was observed.     

Constructing Conductive Interfaces between Nickel Oxide Nanocrystals and Polymer Carbon Nitride for Efficient Electrocatalytic Oxygen Evolution Reaction

Combining transition metal oxide catalysts with conductive carbonaceous material is a feasible way to improve the conductivity. However, the electrocatalytic performance is usually not distinctly improved because the interfacial resistance between metal oxides and carbon is still large and thereby hinders the charge transport in catalysis. Herein, the conductive interface between poorly conductive NiO nanoparticles and semi‐conductive carbon nitride (CN) is constructed. The NiO/CN exhibits much‐enhanced oxygen evolution reaction (OER) performance than corresponding NiO and CN in electrolytes of KOH solution and phosphate buffer saline, which is also remarkably superior over NiO/C, commercial RuO₂, and mostly reported NiO‐based catalysts. X‐ray photoelectron spectroscopy and extended X‐ray absorption fine structure spectrum reveal that a metallic Ni–N bond is formed between NiO and CN. Density functional theory calculations suggest that NiO and CN linked by a Ni–N bond possess a low Gibbs energy for OER intermediate adsorptions, which not only improves the transfer of charge but also promotes the transmission of mass in OER. The metal–nitrogen bonded conductive and highly active interface pervasively exists between CN and other transition metal oxides including Co₃O₄, CuO, and Fe₂O₃, making it promising as an inexpensive catalyst for efficient water splitting.     

Performance of disturbance augmented control design in turbulent wind conditions

This paper investigates the use of disturbance models in the design of wind turbine individual pitch controllers. Previous work has used individual pitch control and disturbance models with the Multiblade Coordinate Transformation to design controllers that reduce the blade loads at the frequencies associated with the rotor speed. This paper takes a similar approach of using a disturbance model within the H_∞ design framework to account for periodic loading effects. The controller is compared with a baseline design that does not include the periodic disturbance model. In constant wind speeds, the disturbance model design is significantly better than the baseline design at canceling blade loads at the rotor frequencies. However, these load reduction improvements become negligible even under low turbulent wind conditions. The two controllers perform similarly in turbulent wind conditions because disturbance augmentation improves load reduction only at the multiples of the rotor frequency in the yaw and tilt moment channels whereas turbulence creates strong collective bending moments. In addition, turbulent wind contains energy across a broad frequency spectrum and improvements at multiples of the rotor frequency are less important in these conditions. Therefore inclusion of periodic disturbance models in the control design may not lead to the expected load reduction in fielded wind turbines.     

Vacuum-processed polyethylene as a dielectric for low operating voltage organic field effect transistors

We report on the fabrication and performance of vacuum-processed organic field effect transistors utilizing evaporated low-density polyethylene (LD-PE) as a dielectric layer. With C₆₀ as the organic semiconductor, we demonstrate low operating voltage transistors with field effect mobilities in excess of 4 cm²/Vs. Devices with pentacene showed a mobility of 0.16 cm²/Vs. Devices using tyrian Purple as semiconductor show low-voltage ambipolar operation with equal electron and hole mobilities of ～0.3 cm²/Vs. These devices demonstrate low hysteresis and operational stability over at least several months. Grazing-angle infrared spectroscopy of evaporated thin films shows that the structure of the polyethylene is similar to solution-cast films. We report also on the morphological and dielectric properties of these films. Our experiments demonstrate that polyethylene is a stable dielectric supporting both hole and electron channels.     

Performance evaluation of random power capture on mobile communications

Power assignment schemes are man‐made methods to enhance the capture effect of radio communications. In a previous study, Wen and Yang investigated the combined capture effect of the fixed power assignment scheme, Rayleigh fading, and near–far effect on the performance of packet radios. The performance analysis was limited to an infinite population environment. This assumption is reasonable for a conventional packet radio system with a vast service area. However, for a cellular mobile system, a finite population model should be used. In this paper, we analyse the combined natural and man‐made capture effect on the performance of a cellular system with finite population in each cell. A random power assignment scheme is adopted to produce the man‐made capture. The system throughput and delay are carried out by a Markov model. Some numerical calculations are used to demonstrate the degree of performance improvement. Copyright © 2001 John Wiley & Sons, Ltd.