A model of energy management analysis,case study of a sugar factory in Turkey

This study presents a case study of energy management in a sugar factory in Turkey. The main idea of the study is to analyse energy consumption, the quantity of material production, and figure out a suitable energy efficiency for the case study of a sugar factory subsequently. Firstly, a material production and energy consumption audit were performed for the sugar factory. Secondly, energy efficiency was calculated from the energy data. The SPSS (Statistical Package for the Social Sciences) statistical software was used to ensure the accuracy of the data. The factory’s energy consumption was calculated as 43,590.25 toe (tons of oil equivalent) over the last year. These results were used for CUSUM (Cumulative Sum Deviation Method) graphics. This research poses the consumption of energy, cost of energy and the relationship between energy usage and material production of sugar. The unit of energy cost was 688.22 [$/toe] for the last year. This result showed that the factory decreased the unit of energy by optimisation. The results indicated that the investigated sugar factory should pay attention to the energy management issue in order to comply with the Energy Efficiency of Turkish Law and Directives.     

Magnetic Properties of Zn1?x Ni x O (0.25≤x≤ 0.50) Prepared by Solid-State Reactions

In this study the origin of ferromagnetism in ZnO-based bulk systems has been investigated using Ni-doped ZnO samples, Zn_1−x Ni _x O with 0.25≤x≤0.50, prepared by solid-state reactions. The structural characterizations indicated that the Ni²⁺ ions almost uniformly distributed in all the samples, and the samples have hexagonal wurtzite structure; however, when x is increased toward 0.50, a new NiO phase is formed. A ferromagnetism (FM) has been observed for all the samples at and below the room temperature. In other words, the room temperature results of (M–H) curves show that the FM observed is intrinsic for all the Ni-doped ZnO samples. However, the saturated magnetizations decrease gradually with increasing Ni concentration. This indicates that, in addition to FM, the excessive doping of Ni in ZnO also causes an antiferromagnetic (AFM) contribution which increases with increasing Ni amount. This result is also supported by the magnetization against temperature measurements. Furthermore, the trend of the ac-susceptibility (χ) versus temperature curves, measured under an ac-magnetic field of 100 Oe, also support our conclusion about the antiferromagnetic contribution to ferromagnetism in our samples.     

Selective separation of cobalt and nickel by supported liquid membranes

The selective separation of cobalt from acidic media, containing both equimolar and nonequimolar mixtures of cobalt and nickel, was examined by supported liquid membranes using Alamine 336 as mobile carrier dissolved in various diluents. The membrane support was microporous hydrophobic polypropylene Celgard 2500 (25 μm thick, 0.209 × 0.054 μm pore size and 55% porosity). Acetic acid-Na acetate buffer was used for the adjustment of the feed pH which was critical. Various parameters were experimentally studied and the optimum conditions were determined.     

Investigation of the effects of geometrical parameters on heat transfer from buried finned pipes

Heat transfer from finned pipes buried in the soil has been investigated using experimental, analytical and numerical techniques. The experimental setup consists of a ground source heat pump system and two separate ground heat exchangers. Constant surface temperature approach based on Carslaw and Jaeger’s theory study was used for calculating the heat transfer from the pipes analytically. The problem was modeled and solved using a CFD program numerically. Effects of the fin number, fin length and simulation time on the heat transfer rate have been investigated and compared with bare tube. A modified analytical formula was also proposed for finned pipes in this study.     

The preparation of core–shell Al2O3/Ni composite powders by electroless plating

Core–shell nanostructured Ni-coated Al₂O₃ composite powders were synthesised by using the electroless plating method. The influence of the chemical components and powder concentration in the Ni coating was investigated by scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction techniques. The results show that the concentration of the plating components plays an important role in the formation of core–shell Al₂O₃/Ni composite powders. The nickel content in the composite powders could be effectively controlled by adjusting the nickel chloride content and the concentration of NaH₂PO₂·H₂O in the plating solution. The nanostructure of the crystalline Ni coatings was observed to be very attractive for achieving good bonding between ceramic particles and matrices for composite production.     

Modification of cyclohexanone-formaldehyde-resin

The reactions of cyclohexanone-formaldehyde-resin via its hydroxy and carbonyl functional groups with a number of different reagents such as acetic anhydride, benzoyl chloride, hydroxylamine, semicarbazide, and phenyl hydrazine were studied. Melting points, IR spectrums, and solubilities in various solvents of the products were determined.     

Computed tomography of the spine as an important diagnostic tool in the management of war missile spinal trauma

Twenty-two patients with spinal injury were evaluated by plain radiography immediately after hospital admission. In 14 patients whose condition was stable, we performed computed tomography (CT) scanning through the involved segments. To provide better planning before neurosurgical management, we divided the vertebral column in thirds. According to this division, we concluded that these injuries are mostly extensive, severely damaging all three thirds of the vertebral column and accompanying neural structures in the majority of cases. The information acquired by Ct concerning bony fragments, bone destruction, dural tear, spinal cord and nerve root compression, and neural damage directly influenced the surgical management. All patients except one underwent surgery while associated injuries of other organs were given priority in management. Injuries of the thoracic and the lumbar spine were the most common ones, frequently found in association with lesions of nearby organs. Penetrating injuries with a dural lesion were present in the majority of cases, while spinal cord injury was obvious in some. They were all well visualized using spinal CT scanning. Our view is that the role of CT is essential in guiding surgical management of war missile injuries to the spine.     

Substrate specificity of NO synthases: detailed comparison of L-arginine, homo-L-arginine, their N omega-hydroxy derivatives, and N omega-hydroxynor-L-arginine

A detailed comparison of the oxidation of five compounds closely related to L-arginine (Arg) by purified recombinant neuronal and macrophage NO synthases (NOS I and NOS II) was performed. Homo-L-arginine (homo-Arg) is oxidized by both NOSs in the presence of NADPH with major formation of NO and homo-L-citrulline, with a molar ratio of close to 1, and minor formation of N omega-hydroxyhomo-L-arginine (homo-NOHA). Oxidation of homo-NOHA by the two NOSs also leads to NO and homocitrulline in a 1:1 molar ratio. On the contrary, N omega-hydroxynor-L-arginine (nor-NOHA) is a very poor substrate of NOS I and II, which fails to produce significant amounts of nitrite. The catalytic efficiency of both NOSs markedly decreases in the order Arg > NOHA > homo-Arg > homo-NOHA, as shown by the 20- and 10-fold decrease of kcat/Km observed for NOS I and NOS II, respectively, when comparing Arg to homo-NOHA. The greater loss of catalytic efficiency for homo-Arg, when compared to that for Arg, appears to occur at the first step (N-hydroxylation) of the reaction. In that regard, it is noteworthy that the Vm values for NOHA and homo-NOHA oxidation are very similar (about 1 and 2 micromol of NO min-1 mg of protein-1 for NOS I and II, respectively). In fact, lengthening of the Arg chain by one CH2 leads not only to markedly decreased kcat/Km but also to clear disturbances in NOS functioning. This is shown by a greater accumulation of the N omega-hydroxyguanidine intermediate (homo-NOHA:homocitrulline ratio between 0.2 and 0.4) and an increased consumption of NADPH for NO formation (between 2.0 and 2.6 mol of NADPH consumed for the formation of 1 mol of NO in the case of homo-Arg, instead of 1.5 mol in the case of Arg). Most of the above results could be interpreted by comparing the possible positionings of the various substrates relative to the two NOS active oxygen species which are believed to be responsible for the two steps of the reaction.     

Human Exposure Assessment Location (HEAL)--historical review

The first part of the review describes events and newly acquired knowledge that anticipated the making of the HEAL project and its preparatory phase. The pilot study relied on the belief that the total exposure assessment should take into account different pollutants and their relative contribution in the human intake from different environmental media such as air, drinking water, food chain, and soil. The pilot study included exposure assessment to lead and cadmium, nitrogen dioxide, hexachlorobenzene, and DDT-complex. Concurrently, another study on indoor air quality in Kenya and Gambia took place. In its second phase, the project evaluated the actual trends and outlined potential future directions. It was decided that the project should focus on the promotion of exposure studies, particularly in developing countries, and that it should establish a closer relation with health risk assessment and environmental epidemiology. The last part of the review describes the participation of the Institute for Medical Research and Occupational Health in Zagreb, Croatia in the project and in related research activities performed after the pilot phase.     

Digital Image Analysis in Geotechnical Engineering Education

Existing research has shown that visual input significantly contributes to learning, therefore, it is paramount to use visual tools to help demonstrate engineering concepts. One of these tools, digital image analysis, can help effectively communicate complex concepts to students in a simple and understandable format as a supplement to traditional lecturing, while simultaneously enabling students to have hands-on experience. This note describes a series of activities to incorporate digital image analysis into engineering education. The undergraduate students worked in research projects that involved image-based analysis of geomaterials. Based on these activities and the students’ response to a questionnaire, it was recognized that digital image analysis can enhance the understanding of engineering phenomena for undergraduate students. The hands-on experience and visual demonstration improved the students’ grasp of fundamental concepts in research projects. The research experience allowed the students to build a connection between the classroom and the solution of state-of-the-art engineering scientific problems. It also taught them about cooperation and teamwork, as well as academic independence.