Catalytic effect of potassium carbonate on carbothermic production of hexagonal boron nitride

Effect of potassium carbonate addition on the carbothermic formation of hexagonal boron nitride (hBN) was investigated by keeping the K₂CO₃ added B₂O₃+C mixtures in nitrogen atmosphere at 1400 °C for 40–160 min. K₂CO₃ amount was varied in the range of 10–60 wt% of the B₂O₃+C mixture. Products were subjected to XRD and quantitative analyses, SEM and TEM observations, and particle size measurement. Amount of hBN increased considerably with K₂CO₃ addition; also particle size and crystallinity improved. Catalytic role of K₂CO₃ was suggested as forming a potassium borate melt in which hBN particles form, in addition to carbothermic formation reaction. Effect of K₂CO₃ on increasing the hBN amount decreased when it was used over 40%. This was attributed to the rapid evaporation of the formed potassium borate liquid.     

Synthesis and characterization of PMMA composites activated with starch for immobilization of L‐asparaginase

Poly (methyl methacrylate) (PMMA)–starch composites were prepared by emulsion polymerization technique for L‐asparaginase (L‐ASNase) immobilization as highly activated support. The hydroxide groups on the prepared composites offer a very simple, mild and firm combination for enzyme immobilization. The pure PMMA and PMMA‐starch composites were characterized as structural, thermal and morphological. PMMA‐starch composites were found to have better thermal stability and more hydrophilic character than pure PMMA. L‐ASNase was immobilized onto PMMA‐starch composites contained the different ratio of starch (1, 3, 5, and 10 wt %). Immobilized L‐ASNase showed better performance as compared to the native enzyme in terms of thermal stability and pH. K_m value of immobilized enzyme decreased approximately eightfold compared with the native enzyme. In addition to, immobilized L‐ASNase was found to retain 60% of activity after 1‐month storage period at 4 °C. Therefore, PMMA‐starch composites can be provided more advantageous in terms of enzymatic affinity, thermal, pH and storage stability as L‐ASNase immobilization matrix. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43421.     

Functionalized Hybrid Coatings on ABS Surfaces by PLD and Dip Coatings

It is important to give water-repellent and antibacterial properties to the acrylonitrile butadiene styrene (ABS) surfaces of the hearing aids. In this study, the sol–gel Si and sol–gel Ti solutions were prepared from the reactions of silicon ethoxide, titanium butoxide and methacrylic acid. The catalyst and Dynasylan F8815 were added to the sol–gel solutions to give hydrophobic properties onto the ABS surfaces. Additionally, silver nanoparticles were synthesized by nanosecond laser and added to the coating solutions to give extra antibacterial properties. The surfaces of the ABS targets were coated using the sol–gel dip coating and pulsed laser deposition techniques. The coatings with good adhesion between film and substrate and good water-repellent properties were achieved. The average contact angles for the coated ABS surfaces were measured in the range between 120 and 125 degrees. The obtained sol–gel materials and produced thin films onto the ABS surfaces were also analyzed in terms of the antibacterial properties. The highly antibacterial properties were observed in the sol–gel solutions and the thin films.     

Contact dynamic modeling of a liquid droplet between two approaching porous materials

A computational fluid dynamics model based on a finite difference solution to mass and momentum conservation equations (Navier–Stokes equations) for a liquid droplet transport between two porous or nonporous contacting surfaces (CSs) is developed. The CS dynamic (equation of motion) and the spread of the incompressible liquid available on the primary surface for transfer are coupled with the Navier–Stokes equations. The topologies of the spread dynamic between and inside both surfaces (primary and CSs) are compared with experimental data. The amount of mass being transferred into the CS, predicted by the model, is also compared to the experimental measurements. The impact of the initial velocity on the spread topology and mass transfer into the pores is addressed. © 2014 American Institute of Chemical Engineers AIChE J, 60: 2346–2353, 2014     

Selective separation of cobalt and nickel by flat sheet supported liquid membrane using Alamine 300 as carrier

Cobalt and nickel are among the most important nonferrous metals. The using of flat sheet supported liquid membranes (FSSLMs) to remove metals from wastewaters has been used actively by the scientific and industrial communities. In this study, the selective separation of cobalt from thiocyanate solutions containing cobalt and nickel by FSSLM was examined using tri-n-octylamine (Alamine 300) as carrier. The FSSLM was consisted of extractant, flat sheet support and organic solvent. The various parameters were studied to determine the optimum extraction and striping conditions of cobalt and nickel. These parameters were stirring speeds of phases, NH₄SCN concentration, pH, diluent type, extractant concentration, stripping reagent concentration and modifier concentration. Concentration of cobalt and nickel were determined by Shimadzu AA-6701GF spectrophotometer. In the optimum conditions, selective separation of cobalt was achieved with an efficiency of 98.4% within 8 h, for equimolar feed mixtures, 400 mg/L Co + 400 mg/L Ni, and the separation factor of Co(II) over Ni(II) was 234.4. In addition, for nonequimolar feed mixtures, 500 mg/L Co + 1000 mg/L Ni, Ni in excess, selective separation of cobalt was 99.9%, and the separation factor of Co was 506 in the same time.     

The effect of magnetic field on the impurity binding energy of shallow donor impurities in a Ga1?xInxNyAs1?y/GaAs quantum well

Using a variational approach, we have investigated the effects of the magnetic field, the impurity position, and the nitrogen and indium concentrations on impurity binding energy in a Ga_1−xIn_xN_yAs_1−y/GaAs quantum well. Our calculations have revealed the dependence of impurity binding on the applied magnetic field, the impurity position, and the nitrogen and indium concentrations.     

Phenolic Composition and Antioxidant Capacity of Bilberry (<Emphasis Type="Italic">Vaccinium myrtillus</Emphasis>) Leaves in Northern Europe Following Foliar Development and Along Environmental Gradients

Bilberry is a characteristic field layer species in the boreal forests and is an important forage plant for herbivores of the North European ecosystem. Bilberry leaves contain high levels of phenolic compounds, especially hydroxycinnamic acids, flavonols, catechins, and proanthocyanidins. We investigated the phenolic composition of bilberry leaves in two studies, one following foliar development in forest and open areas, and the other along a wide geographical gradient from south to north boreal forests in Finland. An analysis of bilberry leaves collected in open and forest areas showed that major phenolic changes appeared in the first stages of leaf development, but, most importantly, synthesis and accumulation of flavonoids was delayed in the forest compared to the high light sites. Sampling along a geographical gradient in the boreal zone indicated that leaves from higher latitudes and higher altitudes had greater soluble phenolic and flavonol levels, higher antioxidant capacity, and lower contents of chlorogenic acid derivatives. The ecological significance of the results is discussed.     

Online monitoring of diallyldimethylammonium chloride polymerization

Diallyldimethylammonium chloride, which is an acidic salt with numerous applications, was polymerized in water at three different monomer concentrations and at three different pHs which the monomer is in charged form. Reactions were investigated by the automatic continuous online monitoring of polymerization technique. Conversion, molecular weight, and reduced viscosity were monitored. The reaction is found to be second‐order with respect to monomer. Rate constants and molecular weights tend to increase with pH and concentration. POLYM. ENG. SCI., 54:1350–1356, 2014. © 2013 Society of Plastics Engineers     

Chemical Profile and Biological Activities of Two Edible Plants: Chemical Investigation and Quantitative Analysis Using Liquid Chromatography Tandem Mass Spectrometry and Gas Chromatography Mass Spectrometry

The objectives of this study were to define the phenolic and fatty acid profiles, anticholinesterase, antioxidant, antimicrobial activities, and total phenolic-flavonoid contents of Lycopsis orientalis and Tragopogon latifolius var. angustifolius which have been used as food source and food supplement in Anatolia and have never been examined before. Rosmarinic and quinic acids (21.11 and 11.46 mg g^–1 extract, respectively) were found to be the most abundant constituents in L. orientalis and T. latifolius var. angustifolius among the studied 27 compounds by liquid chromatography tandem mass spectrometry. In the fatty acid compositions of L. orientalis and T. latifolius var. angustifolius that were determined by gas chromatography mass spectrometry, oleic (29.1%) and palmitic (28.7%) acids were identified as the major components, respectively. The high antioxidant activity of the methanol extract of L. orientalis shows parallelism to its rosmarinic acid content. Besides, this extract showed medium anticholinesterase activity. The results of the present study proves that the L. orientalis might also be used as a food source due to its high phenolic acid content and strong antioxidant property.     

Modeling of the electromechanical coupling between crack propagation and piezoelectric behavior in active layers of smart devices

In this article, a new computational approach is investigated to predict the crack propagation inside some smart structures equipped with surface-bonded piezoelectric layers; meanwhile, the electromechanical coupling is exploited. The current industrial need of analyzing rather irregular geometries motivates resorting to a numerical approach. Therefore, the finite element method (FEM) is used to predict both the fracture behavior and the coupled response of piezoelectric material through a suitable interoperation of the two computational environments, available in some commercial code like the ABAQUS^©. The two solutions are then coupled by means of a subroutine, in this case operated through the ISIGHT^© tool. After a preliminary analysis and a validation, results of some numerical simulations are shown to highlight some significant peculiarities of the coupled behavior of the piezoelectric material.