重点建设工程档案管理工作探讨

针对重点建设工程档案的管理现状,提出了明确岗位责任、加强制度建设以及夯实基础工作的档案管理理念。     

A knowledge-based system for sensor selection

This paper presents a Knowledge-based system (KBS) developed to allow users, who may not be knowledgeable about sensors, to select sensors suitable for their specific needs. The KBS runs on a micro-computer. The selection criteria are user specified and are based on the desired measurement parameters. The system output includes all of the operational and dimensional parameters of the recommended sensor, price, and vendor information.     

Analyses of the practical adhesion strengths of the metal/polymer interfaces in electronic packaging

There is a plethora of techniques to measure the adhesion strength of metal/polymer interfaces. However, the practical adhesion strength, which is the work done in separating the film from the substrate (or one film from another), is very sensitive to the test methods and the mechanical effects, such as the residual stress, thickness and mechanical properties of the layers, strain rate, and phase angle. Deriving intrinsic-adhesion properties of the interfaces, which are independent of such parameters, from the practical adhesion-strength measurements is a formidable task. In the present work, data from the three commonly used adhesion tests; pull-out, 90°-peel, and T-peel tests are compared with the intrinsic-adhesion properties of the interface, such as the interface-fracture toughness or the interface-fracture energy, and their implications are discussed. Material systems analyzed were Cu-based lead frame/epoxy-molding compound (EMC) and Cu/Cr/polyimide.     

微重力落塔电磁悬吊、释放技术研究

论述了微重力落塔电磁悬吊、释放、提升机构的关键技术,电磁释放过程的特性分析以及微重力落塔实际试验的情况。分析说明:悬吊、释放性能的好坏决定了试验落舱的微重力水平,也是微重力落塔试验能否成功的关键技术。     

WC对铜基和镍基喷焊覆层材料耐气蚀性能的影响

在CuNiSiB,NiCrSiB自熔合金粉末中添加WC陶瓷颗粒，利用氧乙炔焰粉末喷焊工艺制备覆层材料，用超声波振动气蚀仪对覆层材料进行耐气蚀性能研究，用扫描电子显微镜对覆层材料表面气蚀破坏形貌进行观察，结果表明：复合覆层材料的耐气蚀能力比基体强；提高CuNiSiB覆层材料耐气蚀能力的途径是强化晶界，还探讨了覆层材料的气蚀破坏机理。     

标准椅全身计数器对不同年龄组均匀体模源全能峰效率的刻度

本文介绍了用标准液体源均匀充入聚氯乙烯制的体模,刻度标准椅全身计数器〔φ8″×4″(NaI)〕的方法和结果。分别就代表6个年龄组的体模,测定了标准椅全身计数器对5种能量(364,637,898,1460和1836keV)γ射线的全能峰效率;给出了全能峰效率与γ射线能量和被测对象体重的关系曲线。     

北京谱仪端盖簇射计数器工作气体的研究

为使北京谱仪端盖族射计数器更好地工作在自猝灭流光ＳＱＳ模式下，提高其能量分辨以及线性等指标，用Ａｒ，ＣＯ２，Ｌｓｏｂｕｔａｎｅ三元工作气体对探测器的工作性能进行了仔细研究，找出了一适合于主雇地数器的工作气体，此外，还研究了异丁的纯度对探测器性能的影响。     

求通信网生存能力的一种分裂二叉树算法

本文研究了布尔代数方法在通信网生存能力分析中的应用，提出了一种求布尔代数式不交化变换的分裂二叉树算法，与现有的同类算法相比，该算法具有结构清晰、执行效率高、易于实现等优点。     

A general approach for the stability analysis of the time-domain finite-element method for electromagnetic simulations

This paper presents a general approach for the stability analysis of the time-domain finite-element method (TDFEM) for electromagnetic simulations. Derived from the discrete system analysis, the approach determines the stability by analyzing the root-locus map of a characteristic equation and evaluating the spectral radius of the finite element system matrix. The approach is applicable to the TDFEM simulation involving dispersive media and to various temporal discretization schemes such as the central difference, forward difference, backward difference, and Newmark methods. It is shown that the stability of the TDFEM is determined by the material property and by the temporal and spatial discretization schemes. The proposed approach is applied to a variety of TDFEM schemes, which include: (1) time-domain finite-element modeling of dispersive media; (2) time-domain finite element-boundary integral method; (3) higher order TDFEM; and (4) orthogonal TDFEM. Numerical results demonstrate the validity of the proposed approach for stability analysis.     

太钢电弧炉上应用四星接法MOA的必要性

分析了太钢电弧炉变压器高压侧相间过电压的产生原因，比较了用于限制过电压的避雷器的两种接法．结论是用四垦接法ＭＯＡ限制过电压的效果较显著．