Recent advances for serial processes of hazardous chemicals in fully integrated microfluidic systems

The development and enlargement of toxic and hazardous chemicals are severely limited by health and safety concerns. We summarize studies on fully integrated micro-chemical systems and total processes to reduce accidental exposure to various regents that are toxic, explosive, or carcinogenic, which significantly improved the safety of work involving risky compounds. This review covers the leak-free continuous-flow processes of hazardous chemicals in fully integrated microfluidic systems, specially denoted as micro-total envelope systems (μ-TESs), that are conducting a serial process of the generation of hazardous reagents, in-situ purification and separation, subsequent reaction, and product isolation with improved efficiencies. These attempts suggest safe and efficient tools and processes of useful but hazardous chemicals for researchers and manufacturing workers in the field of pharmaceutic discovery, natural products, biology as well as materials synthesis.     

Characterizations of surfactant synthesized from Jatropha oil and its application in enhanced oil recovery

Surfactants are frequently used in chemical enhanced oil recovery (EOR) as it reduces the interfacial tension (IFT) to an ultra‐low value and also alter the wettability of oil‐wet rock, which are important mechanisms for EOR. However, most of the commercial surfactants used in chemical EOR are very expensive. In view of that an attempt has been made to synthesis an anionic surfactant from non‐edible Jatropha oil for its application in EOR. Synthesized surfactant was characterized by FTIR, NMR, dynamic light scattering, thermogravimeter analyser, FESEM, and EDX analysis. Thermal degradability study of the surfactant shows no significant loss till the conventional reservoir temperature. The ability of the surfactant for its use in chemical EOR has been tested by measuring its physicochemical properties, viz., reduction of surface tension, IFT and wettability alteration. The surfactant solution shows a surface tension value of 31.6 mN/m at its critical micelle concentration (CMC). An ultra‐low IFT of 0.0917 mN/m is obtained at CMC of surfactant solution, which is further reduced to 0.00108 mN/m at optimum salinity. The synthesized surfactant alters the oil‐wet quartz surface to water‐wet which favors enhanced recovery of oil. Flooding experiments were conducted with surfactant slugs with different concentrations. Encouraging results with additional recovery more than 25% of original oil in place above the conventional water flooding have been observed. © 2017 American Institute of Chemical Engineers AIChE J, 63: 2731–2741, 2017     

Effect of hydrophilic and hydrophobic cyclodextrins on the release of encapsulated allyl isothiocyanate (AITC) and their potential application for plastic film extrusion

Allyl isothiocyanate (AITC), a natural pungent flavor from wasabi and horseradish, is well-known antimicrobial agents against foodborne pathogens. However, its highly volatile nature and low thermal stability restrict its application in the food packaging industry. Also, its strong organoleptic characteristics hinder its application at a higher dosage. We encapsulated AITC in β-cyclodextrin (β-CD) and triacetyl-β-CD (TA-β-CD) and evaluated the performance as slow releasing active compounds through low-density polyethylene (LDPE)–cyclodextrins (CDs) matrix. Also, the thermal, optical, mechanical, and barrier properties of two ternary blends, LDPE/β-CD/AITC(L-CDs) and LDPE/TA-β-CD/AITC(L-TACDs), were investigated to compare their compatibility under the plastic extrusion process. During the 15 days of the storage period, L-TACDs maintained more consistent AITC release and a higher concentration than L-CDs. Also, the blending of LDPE and TA-β-CD was more compatible with that of LDPE and β-CD. No significant optical, mechanical, and barrier property changes were observed in LDPE with less than 3% of TA-β-CD while L-CDs showed substantial agglomeration on the ternary blend films and the lower mechanical and barrier properties than pure LDPE. The results indicate that the LDPE films containing TA-β-CD/AITC can be applied as an effective antimicrobial packaging material for food and nonfood applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48137.     

Kinetics study on cnt‐supported RuKCo FTS catalyst in a fixed bed reactor

The rate of syngas (H₂/CO) consumption over a RuKCo/CNT Fischer–Tropsch synthesis (FTS) catalyst was measured in a fixed bed microreactor at 210–225°C, 2–3.5 MPa, H₂/CO feed molar ratios of 1–2.5, and gas hourly space velocity (GHSV) range of 2700–3600 h^?1. The data have been used to model the kinetics of the FTS reactions within the range of the studied conditions. One empirical power law model and four semi‐empirical kinetic models based on Langmuir–Hinshelwood‐type equation have been evaluated. The best fitting was obtained with the equation: similar to that proposed by Brötz et al. The estimated activation energy (E = 80–85 kJ/mol) is lower than that is reported in the literature. The validity of these results are restricted to fixed beds with the given catalyst in the tested conversion regime.     

Multiobjective Optimization of Simulated Moving Bed Reactor and its Modification — Varicol Process

A comprehensive optimization study on a Simulated Moving Bed Reactor (SMBR) system is reported in this article for the direct synthesis of Methyl Tertiary Butyl Ether (MTBE). In addition, the SMB technology, which is based on synchronous switching of ports, was modified to a new more flexible Varicol process based on non‐synchronous switching. Multi‐objective optimization has been performed for both SMBR and Varicol and their efficiencies were compared. A state‐of‐the‐art optimization technique, viz., Non‐dominated Sorting Genetic Algorithm (NSGA) that allows handling of these complex optimization problems is employed in this study.     

Linearizer for pulse-shaping of received pulse in ultra-wideband radio systems

This paper presents a novel concept of pulse-shaping in an ultra-wide band radio system. Instead of attempting to design an antenna with flat group delay, the emphasis has been shifted to the signal processing aspect of pulse shaping. The received pulse which has broadened due to non-linear phase response of the propagating channel is shaped back closer to the ideal pulse using a linearizer. The block schematic of the linearizer is presented along with simulated results. Though only a Rayleigh first order pulse has been used for simulation purpose, the method can easily be generalized to incorporate other pulse shapes.     

Computational study of 5<Emphasis Type="Italic">d</Emphasis> transition metal mononitrides and monoborides using density functional method

5d-metal mononitrides and monoborides viz. X-N and X-B (X = La, Hf, Ta, W, Re, Os, Ir, Pt, Au, Hg) are studied using density functional method based B3LYP functional with LANL2DZ and SDD basis set. The lowest spin state, electron affinities, ionization potentials and binding energies for mononitrides and monoborides are obtained. The electronic state and electronic configuration of mononitrides and monoborides are discussed. Orbitals involved in bond formation are identified. The properties of mononitrides and monoborides are compared. It is found that 5d-metal atoms form stronger bond with nitrogen atom than the boron atom. The range of binding energy, electron affinity and ionization potential is wider for mononitrides than that for monoborides. The properties of 5d-metal mononitrides and 3d-metal mononitrides are also compared. The binding energies for the former are lower than those for the latter.     

Cold Model Investigations of Melting of Ice in a Gas-Stirred Vessel

The melting of steel scrap in high temperature liquid iron melt is investigated by conducting cold model experiments of the melting of ice sample of different geometries and sizes in an argon-stirred vessel containing water. The melting process of ice samples is observed using a high-speed camera. Design of experiments is based on similarity criteria. The relationships between non-dimensional groups related to heat transfer (Nu, Re, Pr, and Gr) are derived for different experimental conditions. The results are compared with those reported in the literature. The heat transfer coefficient is estimated as a function of mixing power and is found to be in good agreement with the calculated values obtained by using reported relationships in literature.     

Antibacterial mode of action of seed essential oil of Eleutherococcus senticosus against foodborne pathogens

This study investigated the antibacterial mechanism of action of the seed essential oil of Eleutherococcus senticosus (ESEO) against foodborne pathogenic bacteria. Preliminarily, the ESEO (1000 μg disc^?1) showed potential antibacterial effect as diameter of inhibition zones (12.0 ± 0.2–37.0 ± 2.0 mm) against the tested foodborne pathogens. The MIC and MBC values of ESEO against the tested bacteria were found in the range of 125–500 and 500–1000 μg mL^?1, respectively. At MIC concentration, the ESEO had potential inhibitory effect on the cell viability of the tested pathogens. In addition, SEM analysis showed the inhibitory effect of ESEO as confirmed by considerable morphological alterations on the cell wall of B. cereus ATCC 13061 and E. coli O157:H7 ATCC 43889. Moreover, the ESEO revealed its mode of action against foodborne pathogens on membrane integrity as confirmed by release of extracellular ATP, 260‐nm absorbing materials and leakage of potassium ions. These findings confirm that the ESEO can be used as a potential antibacterial agent in food industry to inhibit the growth of various foodborne pathogens.