Characterizations of surfactant synthesized from Jatropha oil and its application in enhanced oil recovery

Surfactants are frequently used in chemical enhanced oil recovery (EOR) as it reduces the interfacial tension (IFT) to an ultra‐low value and also alter the wettability of oil‐wet rock, which are important mechanisms for EOR. However, most of the commercial surfactants used in chemical EOR are very expensive. In view of that an attempt has been made to synthesis an anionic surfactant from non‐edible Jatropha oil for its application in EOR. Synthesized surfactant was characterized by FTIR, NMR, dynamic light scattering, thermogravimeter analyser, FESEM, and EDX analysis. Thermal degradability study of the surfactant shows no significant loss till the conventional reservoir temperature. The ability of the surfactant for its use in chemical EOR has been tested by measuring its physicochemical properties, viz., reduction of surface tension, IFT and wettability alteration. The surfactant solution shows a surface tension value of 31.6 mN/m at its critical micelle concentration (CMC). An ultra‐low IFT of 0.0917 mN/m is obtained at CMC of surfactant solution, which is further reduced to 0.00108 mN/m at optimum salinity. The synthesized surfactant alters the oil‐wet quartz surface to water‐wet which favors enhanced recovery of oil. Flooding experiments were conducted with surfactant slugs with different concentrations. Encouraging results with additional recovery more than 25% of original oil in place above the conventional water flooding have been observed. © 2017 American Institute of Chemical Engineers AIChE J, 63: 2731–2741, 2017     

Linearizer for pulse-shaping of received pulse in ultra-wideband radio systems

This paper presents a novel concept of pulse-shaping in an ultra-wide band radio system. Instead of attempting to design an antenna with flat group delay, the emphasis has been shifted to the signal processing aspect of pulse shaping. The received pulse which has broadened due to non-linear phase response of the propagating channel is shaped back closer to the ideal pulse using a linearizer. The block schematic of the linearizer is presented along with simulated results. Though only a Rayleigh first order pulse has been used for simulation purpose, the method can easily be generalized to incorporate other pulse shapes.     

Non-monotonic lattice parameter variation with crystallite size in nanocrystalline solids

An anomalous dependence of the lattice parameter on the crystallite size of nanocrystalline ball-milled powders of metals was observed: lattice contraction followed by lattice expansion with decreasing crystallite size. These data were determined by application of detailed X-ray diffraction measurements. To this end the lattice parameters of the metals investigated – nickel, copper, iron and tungsten – were precisely determined by correcting for influences of stacking faults, in the face-centred cubic metals, as well as by correcting for instrument-related aberrations. The non-monotonic variation of the lattice constant was interpreted as the result of two competing mechanisms: interface-stress-induced contraction vs. expansion as a result of the stress field generated at the crystallite boundary due to the increased excess free volume in the crystallite boundary upon decreasing crystallite size.     

Computational study of 5<Emphasis Type="Italic">d</Emphasis> transition metal mononitrides and monoborides using density functional method

5d-metal mononitrides and monoborides viz. X-N and X-B (X = La, Hf, Ta, W, Re, Os, Ir, Pt, Au, Hg) are studied using density functional method based B3LYP functional with LANL2DZ and SDD basis set. The lowest spin state, electron affinities, ionization potentials and binding energies for mononitrides and monoborides are obtained. The electronic state and electronic configuration of mononitrides and monoborides are discussed. Orbitals involved in bond formation are identified. The properties of mononitrides and monoborides are compared. It is found that 5d-metal atoms form stronger bond with nitrogen atom than the boron atom. The range of binding energy, electron affinity and ionization potential is wider for mononitrides than that for monoborides. The properties of 5d-metal mononitrides and 3d-metal mononitrides are also compared. The binding energies for the former are lower than those for the latter.     

Cold Model Investigations of Melting of Ice in a Gas-Stirred Vessel

The melting of steel scrap in high temperature liquid iron melt is investigated by conducting cold model experiments of the melting of ice sample of different geometries and sizes in an argon-stirred vessel containing water. The melting process of ice samples is observed using a high-speed camera. Design of experiments is based on similarity criteria. The relationships between non-dimensional groups related to heat transfer (Nu, Re, Pr, and Gr) are derived for different experimental conditions. The results are compared with those reported in the literature. The heat transfer coefficient is estimated as a function of mixing power and is found to be in good agreement with the calculated values obtained by using reported relationships in literature.     

Antibacterial mode of action of seed essential oil of Eleutherococcus senticosus against foodborne pathogens

This study investigated the antibacterial mechanism of action of the seed essential oil of Eleutherococcus senticosus (ESEO) against foodborne pathogenic bacteria. Preliminarily, the ESEO (1000 μg disc^?1) showed potential antibacterial effect as diameter of inhibition zones (12.0 ± 0.2–37.0 ± 2.0 mm) against the tested foodborne pathogens. The MIC and MBC values of ESEO against the tested bacteria were found in the range of 125–500 and 500–1000 μg mL^?1, respectively. At MIC concentration, the ESEO had potential inhibitory effect on the cell viability of the tested pathogens. In addition, SEM analysis showed the inhibitory effect of ESEO as confirmed by considerable morphological alterations on the cell wall of B. cereus ATCC 13061 and E. coli O157:H7 ATCC 43889. Moreover, the ESEO revealed its mode of action against foodborne pathogens on membrane integrity as confirmed by release of extracellular ATP, 260‐nm absorbing materials and leakage of potassium ions. These findings confirm that the ESEO can be used as a potential antibacterial agent in food industry to inhibit the growth of various foodborne pathogens.     

Temperature measurements in steady axisymmetric partially premixed flames by use of rainbow schlieren deflectometry

We focus on the utility of rainbow schlieren as a tool for measuring the temperature of axisymmetric partially premixed flames (PPFs). Methane-air PPFs are established on a coannular burner. The flames involve two spatially distinct reaction zones, one in an inner premixed region that has a curved tip and a spatially planar wing portion and another that involves an outer nonpremixed zone in which intermediate species burn in air. Schlieren images are found to visualize clearly these PPF characteristics through light deflection by steep refractive-index gradients in the two reaction zone fronts. The temperature distributions of two flames established at fuel-rich mixture equivalence ratios of phi(r) = 1.5 and 2.0, with bulk-averaged velocities, Vreac = 60 cm s(-1) and Vair = 50 cm s(-1), are inferred from color schlieren images, and a measurement error analysis is performed. Errors arise from two sources. One lies in the process of inferring the temperature from the refractive-index measurement by making assumptions regarding the local composition of the flame. We have shown through simulations that the average temperature deviations due to these assumptions are 1.7% for the phi(r) = 1.5 flame and 2.3% for the phi(r) = 2.0 flame. Another source involves the local uncertainty in the measurement of the transverse ray displacement at the filter plane that is used to determine the refractive index and thereafter the flame temperature. We have ascertained that a maximum error of 4.3% in the temperature determination can be attributed to this local measurement uncertainty. This investigation demonstrates the capability of the schlieren technique for providing not only qualitative displays of the PPFs but also full-field-of-view temperature measurements that are accurate, spatially resolved, and nonintrusive.     

Personal recognition using hand shape and texture.

This paper proposes a new bimodal biometric system using feature-level fusion of hand shape and palm texture. The proposed combination is of significance since both the palmprint and hand-shape images are proposed to be extracted from the single hand image acquired from a digital camera. Several new hand-shape features that can be used to represent the hand shape and improve the performance are investigated. The new approach for palmprint recognition using discrete cosine transform coefficients, which can be directly obtained from the camera hardware, is demonstrated. None of the prior work on hand-shape or palmprint recognition has given any attention on the critical issue of feature selection. Our experimental results demonstrate that while majority of palmprint or hand-shape features are useful in predicting the subjects identity, only a small subset of these features are necessary in practice for building an accurate model for identification. The comparison and combination of proposed features is evaluated on the diverse classification schemes; naive Bayes (normal, estimated, multinomial), decision trees (C4.5, LMT), k-NN, SVM, and FFN. Although more work remains to be done, our results to date indicate that the combination of selected hand-shape and palmprint features constitutes a promising addition to the biometrics-based personal recognition systems.     

Empirical Characterization of Session–Based Workload and Reliability for Web Servers

The growing availability of Internet access has led to significant increase in the use of World Wide Web. If we are to design dependable Web–based systems that deal effectively with the increasing number of clients and highly variable workload, it is important to be able to describe the Web workload and errors accurately. In this paper we focus on the detailed empirical analysis of the session–based workload and reliability based on the data extracted from actual Web logs of eleven Web servers. First, we introduce and rigourously analyze several intra–session and inter–session metrics that collectively describe Web workload in terms of user sessions. Then, we analyze Web error characteristics and estimate the request–based and session–based reliability of Web servers. Finally, we identify the invariants of the Web workload and reliability that apply through all data sets considered. The results presented in this paper show that session–based workload and reliability are better indicators of the users perception of the Web quality than the request–based metrics.