Polyester composite water uptake and organic contaminant release affected by carbon nanofiber reinforcements

The incorporation of carbon nanofiber (CNF) into glass fiber (GF) composites is a potential route to extend polymer composite service‐life and enhance mechanical properties. Under nonstatic conditions, only limited information concerning water uptake and contaminant release properties of nanocomposite materials is currently available. Polyester composites containing GF and oxidized CNF were immersed in water for 30 days under nominal pressure at 23 °C, below the polymer's glass‐transition temperature. Water was analyzed and changed every three days to simulate water chemistry regeneration similar to exposures in flowing systems. Composites with oxidized CNF had greater water sorption capacity and leaching rates than CNF‐free composites. The total mass of organic contaminant released correlated with the amount of water sorbed by each composite (r² = 0.91), although CNF dispersion was found to vary greatly within composites. The greatest and least contaminant release rates were found for the polyester‐CNF and the polyester‐GF composites, respectively. While volatile aromatic resin solvents and stabilizer compounds were detected, their concentrations declined over the 30 day exposure period. We hypothesize that the hydrophilic nature of the oxidized CNF increased the water sorption capacity of the polyester composites. Additional studies are warranted that examine the impact of this phenomenon on composite mechanical and long‐term durability properties. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43724.     

Ractions of SiC with H2/H2O/Ar Mixtures at 1300°C

The reactions of a sintered α-SiC with 5% H₂/H₂O/Ar at 1300°C were studied. Thermomchemical modeling indicates that three reaction regions are expected, depending on the initial water vapor or equivalently oxygen content of the gas stream. A high oxygen content ( P (O₂) > 10⁻²² atm) leads to a SiO₂ formation. This generally forms as a protective film and limits consumption of the SiC (passive oxidation). An intermediate oxygen content (10⁻²² atm > P (O₂) > 10⁻²⁶ atm) leads to SiO and CO formation. These gaseous products can lead to rapid consumption of the SiC (active oxidation). Thermogravimetric studies in this intermediate region gave reaction rates which appear to be controlled by H₂O gas-phase transport to the sample and reacted microstructures showed extensive grain-boundary attack in this region. Finally, a very low oxygen content ( P (O₂) < 10⁻²⁶ atm) is thermochemically predicted to lead to selective removal of carbon and formation of free silicon. Experimentally low weight losses and iron silicides are observed in this region. The iron silicides are attributed to reaction of free silicon and iron impurities in the system.     

Aging effects of nanoscale ceria in ceria–platinum composite electrodes for direct alcohol electro-oxidation

Nanocrystalline Pt/CeO₂ composite electrodes were fabricated to study the electrochemical oxidation of methanol and ethanol. The performance of the electrodes was tested as the ceria solutions aged over time. It was observed that the performance oscillated with time, suggesting that the catalytic behavior towards alcohol oxidation was greatly dependent on the aging of the particles. These results point to a great dependence of the catalytic effect on the redox state of the ceria particles.     

Is the ubiquitous presence of barium carbonate responsible for the poor aqueous processing ability of barium titanate?

The ubiquitous presence of barium carbonate (BaCO₃ – BC) as an impurity in barium titanate (BaTiO₃ – BT) has been pointed out as the main reason for the well-known difficulties found by many investigators when attempting to process BT powders in aqueous media. Different and controversial arguments have been put forward to justify the observed aqueous processing difficulties of BT, but a satisfactory explanation is still to be found. With this aim, a systematic study was here undertaken to shed further light on the solid/liquid interactions occurring at the surface of BC and BT particles and their impact on the dispersion ability of both powders, separately and mixed in certain proportions. Long term colloidal stability and high solid loadings (60 vol.%) were obtained for BC, while colloidal instability and a lower maximum content of solids (50 vol.%) could be achieved for BT. This responds to the question risen in the title.     

The fast reaction asymptote of the coalescence-redispersion model

The coalescence-redispersion (CRD) model is examined in the fast chemistry limit for the single bimolecular reaction A+B M R and the series parallel reactions A+B M R;B+R M S occurring in a plug flow reactor with unmixed feed streams. For the single bimolecular reaction it is shown that in this limit the CRD model is asymptotically equivalent to the 3E fast closure as t M 0. For the series parallel reactions the CRD model predictions tend to be bracketed by the 3E slow and fast closure formulations. Representative results are presented for the variance decay of the individual reactants, and it is seen that even in the fast reaction limit where mixing is controlling, the shape of the feed stream PDFs has negligible influence on the progress of the reaction.     

Copolymerization of styrene with an α‐olefin via atom transfer radical polymerization

This investigation reports the preparation of styrene–α‐olefinic random copolymers, using 1‐octene as an α‐olefin, via atom transfer radical polymerization. Atom transfer radical copolymerization of styrene with 1‐octene was successfully carried out using phenylethyl bromide as initiator and CuBr as catalyst in combination with N, N, N′, N″, N″‐pentamethyldiethylenetriamine as ligand. The copolymers had controlled molecular weight, narrow dispersity and well‐defined end groups with significant 1‐octene incorporation in the polymer. Incorporation of 1‐octene in the copolymers was confirmed using ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectroscopy. An increase in 1‐octene content in the monomer feed led to an increase in the level of incorporation of the α‐olefin in the copolymer. An increase in the concentration of 1‐octene led to a decrease in the rate of polymerization and an increase in dispersity. The glass transition temperature of the copolymer gradually decreased as the incorporation of 1‐octene increased. Copyright © 2011 Society of Chemical Industry     

Sol- gel synthesis of Ga2O3 nanorods and effect of precursor chemistry on their structural and morphological properties

Synthesis of mono-crystalline Ga₂O₃ Nanorods was done by sol-gel transformation of gallium(III) isopropoxide (Ga(OPrⁱ)₃). XRD studies were done to determine the planes and crystal structure of synthesized nanorods that showed the synthesis of β-Ga₂O₃(a). TEM studies of synthesized Ga₂O₃ confirmed the synthesis of monocrystalline β-Ga₂O₃ nanorods. To study the effect of precursor chemistry and to determine role of precursor structures on the crystal structure, phase and morphology of the Ga₂O₃, a new modified precursor complex was synthesized. The reaction of Ga(OPrⁱ)₃ with N-phenylsalicylaldimine, [C₆H₄(OH)CH=N(C₆H₅)] in 1:1?M ratio yielded [{(H₅C₆)N?=?CH-C₆H₄O}Ga(OPrⁱ)₂]. The newly synthesized complex was characterized by elemental analyses, molecular weight measurement, FT-IR and NMR (¹H and ¹³C) spectral studies. Spectral studies of the modified complex suggest the presence of bi-dentate mode of attachment of Schiff's base in the solution state. Sol-gel transformations of [{(H₅C₆)N?=?CH-C₆H₄O}Ga(OPrⁱ)₂] in organic medium, yielded γ-Ga₂O₃(b), as found by XRD studies. TEM image of the sample (a) revealed the formation of nano-rods of oxide with average diameter of ~100?nm whereas the TEM image of sample (b) showed presence of nano-sized particles of oxide with average particle size of 10?nm. Morphological and compositional studies of synthesized samples (a) and (b) were carried out using SEM and EDX. The method provides a possibility of large scale synthesis of dissimilar shaped and pure Ga₂O₃ nanoparticles.     

Seismic response of precast reinforced concrete wall subjected to cyclic in-plane and constant out-of-plane loading

This paper provides insight into the seismic behavior of a full-scale precast reinforced concrete wall under in-plane cyclic loading combined with out-of-plane loading replicated by sand backfill to simulate the actual condition of basement walls. The tested wall exhibited flexural cracks, owing to the high aspect ratio and considerable out-of-plane movement due to lateral pressure from the backfill. The wall performed satisfactorily by exhibiting competent seismic parameters and deformation characteristics governed by its ductile response in the nonlinear phase during the test with smaller residual drift. Numerical analysis was conducted to validate experimental findings, which complied with each other. The numerical model was used to conduct parametric studies to study the effect of backfill density and aspect ratio on seismic response of the proposed precast wall system. The in-plane capacity of walls reduced, while deformation characteristics were unaffected by the increase in backfill density. An increase in aspect ratio leads to a reduction in in-plane capacity and an increase in drift. Curves between the ratio of in-plane yield capacity and design shear load of walls are proposed for the backfill density, which may be adopted to determine the in-plane yield capacity of the basement walls based on their design shear.