Degradable Superhydrophilic Iron-Pillared Bentonite Doped with Polybutylene Adipate/Terephthalate Open-Cell Foam: Its Application in Dye Degradation,Removal of Heavy Metal Ions,and Oil–Water Separation

Development of industrialization has brought convenience to people's lives; however, it has also brought serious harm to the environment, where, water pollution is the most obvious. Here, a polybutylene adipate terephthalate (PBAT) open-cell foam doped with iron-pillared bentonite (IPB) is prepared by using sugar as a pore-forming agent and solution phase separation, and then combined with a solution dipping method to coat the foam surface with a polyacrylamide/SiO₂, which makes the PBAT foam superhydrophilic. The static adsorption effect of superhydrophilic IPB-doped PBAT open-cell foam on methylene blue (MB) and Cu²⁺ is studied. The adsorption isotherm fitting shows that the adsorption conforms to the Langmuir model and it has biased toward monolayer adsorption. The adsorption kinetics fitting confirms that the adsorption process is in line with the pseudo-second-order adsorption model, which is dominated by chemical adsorption. The modified PBAT open-cell foam has an adsorption effect on Cu²⁺; however, it has weak cyclic adsorption capacity. It shows a good cyclic adsorption ability for the cationic dye MB and it has >95% photodegradation efficiency of the MB after five time's cyclic adsorption. The superhydrophilicity makes the foam to have better applications in oil–water separation.     

Characterization of Thermal-Sprayed HAP and HAP/TiO<Subscript>2</Subscript> Coatings for Biomedical Applications

In the present study, hydroxyapatite (HAP) coating along with HAP/TiO₂ coating has been deposited by high-velocity flame spray (HVFS) technique onto 316LSS. Titania was used as a bond coat and HAP as top coat in HAP/TiO₂ coating. The main aim of the study is to investigate the corrosion behavior of thermal spray coating of HAP and HAP/TiO₂ on steel. Electrochemical corrosion testing was carried out using potentiodynamic polarization test. The corrosion behavior of bare and as-sprayed specimens was analyzed in simulated body fluid known as Hank’s solution. As-sprayed specimens along with corroded specimens were further characterized by XRD, SEM/EDS, and x-ray mapping analysis. It was observed that the HAP/TiO₂ coating possessed higher microhardness (280 Hv) as compared to HAP coating (254 Hv). Surface roughness also got enhanced in case of HAP/TiO₂ coating (9.35 μm) as compared to pure HAP coating (7.37 μm). The porosity of the HAP coating was found to be higher than the bond coating. It was observed that the Ca/P ratio almost resembled that of the natural bone composition. The corrosion resistance of steel increased after the deposition of HAP and HAP/TiO₂ coatings. The maximum corrosion resistance was exhibited by HAP/TiO₂ coating.     

Producing High-Quality Titanium Alloy by a Cost-Effective Route Combining Fast Heating and Hot Processing

Powder metallurgy is a very attractive method for producing titanium alloys, which can be near-net-shape formed and have freedom in composition selection. However, applications are still limited due to product affordability. In this paper, we will discuss a possible cost-effective route, combining fast heating and hot processing, to produce titanium alloys with similar or even better mechanical properties than that of ingot metallurgy titanium alloys. Two titanium alloys, Ti-5Al-5V-5Mo-3Cr (Ti-5553) and Ti-5Fe, were successfully produced from HDH titanium powder and other master alloy powders using the proposed processing route. The effect of the processing route on microstructural variation and mechanical properties have been discussed.     

Poly(acrylamide) functionalized chitosan: An efficient adsorbent for azo dyes from aqueous solutions

In the present communication we report on the optimization of persulfate/ascorbic acid initiated synthesis of chitosan-graft-poly(acrylamide) (Ch-g-PAM) and its application in the removal of azo dyes. The optimum yield of the copolymer was obtained using 16 × 10⁻² M acrylamide, 3.0 × 10⁻² M ascorbic acid, 2.4 × 10⁻³ M K₂S₂O₈ and 0.1 g chitosan in 25 mL of 5% aqueous formic acid at 45 ± 0.2 °C. Ch-g-PAM remained water insoluble even under highly acidic conditions and could efficiently remove Remazol violet and Procion yellow dyes from the aqueous solutions over a pH range of 3–8 in contrast to chitosan (Ch) which showed pH dependent adsorption. The adsorption data of the Ch-g-PAM and Ch for both the dyes were modeled by Langmuir and Freundlich isotherms where the data fitted better to Langmuir isotherms. To understand the adsorption behavior of Ch-g-PAM, adsorption of Remazol violet on to the copolymer was optimized and the kinetic and thermodynamic studies were carried out taking Ch as reference. Both Ch-g-PAM and Ch followed pseudo-second-order adsorption kinetics. The thermodynamic study revealed a positive heat of adsorption (ΔH°), a positive ΔS° and a negative ΔG°, indicating spontaneous and endothermic nature of the adsorption of RV dye on to the Ch-g-PAM. The Ch-g-PAM was found to be very efficient in removing color from real industrial wastewater as well, though the interfering ions present in the wastewater slightly hindered its adsorption capacity. The data from regeneration efficiencies for ten cycles evidenced the high reusability of the copolymer in the treatment of waste water laden with even high concentrations of dye.     

A 1-Megapixel, progressive-scan image sensor with antibloomingcontrol and lag-free operation

A 1024-pixel×1024-pixel interline charge-coupled device (IL CCD) image sensor has been developed. It incorporates antiblooming and electronic exposure control while eliminating lag and obtaining a high responsivity. The novel features of this device include a noninterlaced, or progressive-scan, architecture and dual-horizontal registers that can be used to clock out the image area by one or two lines at a time. These features make it well suited for applications demanding high-resolution-image capture from a single, high-speed scan. The progressive-scan architecture of this device covers the same resolution in an electronic-camera application as that of a 2-million-element, interlaced device     

Functional orientation of the acyltransferase domain in a module of the erythromycin polyketide synthase

Modular polyketide synthases (PKSs), such as the 6-deoxyerythronolide B synthase (DEBS), catalyze the biosynthesis of structurally complex and medicinally important natural products. These large multienzymes are organized into a series of functional units known as modules. Each dimeric module contains two catalytically independent clusters of active sites homologous to those of vertebrate fatty acid synthases. Earlier studies have shown that modules consist of head-to-tail homodimers in which ketosynthase (KS) and acyl carrier protein (ACP) domains are contributed by opposite subunits to form a catalytic center. Here, we probe the functional topology of the acyltransferase (AT) domain which transfers the methylmalonyl moiety of methylmalonyl-CoA onto the phosphopantetheine arm of the ACP domain. Using a bimodular derivative of DEBS, the AT domain of module 2 (AT2) was inactivated by site-directed mutagenesis. Heterodimeric protein pairs were generated in vitro between the inactivated AT2 (AT2 degrees) polypeptide and an inactive KS1 (KS1 degrees) or KS2 (KS2 degrees) protein. Both of these hybrid proteins supported polyketide synthesis, suggesting that AT2 can perform its function from either subunit. The apparent catalytic rate constants for each of the two hybrid protein pairs, KS1 degrees/AT2 degrees and KS2 degrees/AT2 degrees, were identical, indicating that no significant kinetic preference exists for a particular AT2-ACP2 combination. These results suggest that the AT domain can be shared between the two clusters of active sites within the same dimeric module. Such a novel structural organization might provide a functional advantage for the efficient biosynthesis of polyketides.     

UCS intensity and instructional set in classical eyelid conditioning: Discrimination conditioning and signal-detection analysis.

Conducted discrimination eyelid conditioning at 2 UCS intensities under inhibitory, neutral, and facilitatory instructional sets, in a experiment involving 144 undergraduates in 6 groups. Instructional set yielded receiver operating characteristic curves that were reasonably straight lines on a normal deviate plot. The tentative conclusion from signal-detection theory of an equal discriminability function across instructional sets was contrasted with 4 indices of discrimination, indicating significant but mutually contradictory changes in discrimination as a function of instructional set. Discrimination differences were produced by UCS intensity, particularly under the neutral instructions. (French summary) (16 ref.) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

On a mechanism of stabilizing turbulent free shear layers in cavity flows

Turbulent free shear flows are subject to the well-known Kelvin–Helmholtz type [Panton RL. Incompressible flow. John Wiley and Sons; 1984. p. 675] instability, and it is well-known that any free shear flow which approximates a thin vorticity layer will be unstable to a wide range of amplitudes and frequencies of disturbance. In fact, much of what constitutes flow control in turbulent free shear layers consists of feeding a prescribed destabilizing disturbance to these layers. The question in the control of free shear flows is not whether the shear layer will be stable, but whether you can influence how the layer becomes unstable. In most cases, since these flows are so receptive to forcing input, and naturally tend toward instability, large changes in flow conditions can be achieved with very small amplitude periodic inputs.

Recently, it has been discovered that turbulent free shear flows can also be stabilized using periodic forcing. This is, at first glance, counter-intuitive, considering our long history of considering these flows to be very unstable to forcing input. It is a phenomenon not described in modern fluid dynamic text books. The forcing required to achieve this effect (which we will call turbulent shear layer stabilization) is of a much higher amplitude and frequency than the more traditional type of shear layer flow control effect seen in the literature (which we will call turbulent shear layer destabilization).

A numerical study is undertaken to investigate the effect of frequency of pulsed mass injection on the nature of stabilization, destabilization and acoustic suppression in high speed cavity flows. An implicit, 2nd-order in space and time flow solver, coupled with a recently developed hybrid RANS-LES (Reynolds Averaged Navier Stokes-Large Eddy Simulation) turbulence model by Nichols and Nelson [Nichols RH, Nelson CC. Weapons bay acoustic predictions using a multi-scale turbulence model. In: Proceedings of the ITEA 2001 aircraft-stores compatibility symposium, March 2001], is utilized in a Chimera-based parallel format. This tool is used to numerically simulate both an unsuppressed cavity in resonance, as well as the effect of mass-addition pulsed jet flow control on cavity flow physics and ultimately, cavity acoustic levels.

Frequency (and in a limited number of cases, amplitude) of pulse is varied, from 0 Hz (steady) up to 5000 Hz. The change in the character of the flow control effect as pulsing frequency is changed is described, and linked to changes in acoustic levels. Limited comparison to 1/10th scale experiments is presented.

The observed local stabilization of the cavity turbulent shear layer, when subjected to high frequency pulsed blowing, is shown in simulation to be the result of a violent instability and breakdown of a pair of opposite sign vortical structures created with each high frequency “pulse”. This unique shear layer stabilization behavior is only observed in simulation above a certain critical pulsing frequency. Below this critical frequency, pulsing is shown in simulation to provide little benefit with respect to suppression of high cavity acoustic levels.     

Stability analysis of double-diffusive solar ponds with non-constant temperature and salinity gradients

In this communication, the stability of the double-diffusive solar ponds with non-uniform temperature and salinity gradients has been investigated. This is a further generalization of our approach to this problem initiated in Ref. [7]. Using a stochastic approach, the linearized system of basic equations of motion is reduced to a single integro-differential equation. For convective motion, this equation reduces to a time-independent Schrödinger equation for a particle moving in a potential field ƒ(Z) characterized by the non-uniform temperature and salinity gradients. This equation can, in general, be solved (exactly or approximately depending on the form of the gradient profile) by methods commonly used in quantum mechanics.

In the Appendix, we show that, for a quadratic gradient profile, the above equation has an analytical solution similar to that obtained by Zangrando using numerical computations.