Synthesis and characterization of N‐ and O‐alkylated poly[aniline‐co‐N‐(2‐hydroxyethyl) aniline]

Poly[aniline‐co‐N‐(2‐hydroxyethyl) aniline] was synthesized in an aqueous hydrochloric acid medium with a determined feed ratio by chemical oxidative polymerization. This polymer was used as a functional conducting polymer intermediate because of its side‐group reactivity. To synthesize the alkyl‐substituted copolymer, the initial copolymer was reacted with NaH to obtain the N‐ and O‐anionic copolymer after the reaction with octadecyl bromide to prepare the octadecyl‐substituted polymer. The microstructure of the obtained polymers was characterized by Fourier transform infrared spectroscopy, ¹H‐NMR, and X‐ray diffraction. The thermal behavior of the polymers was investigated by thermogravimetric analysis and differential scanning calorimetry. The morphology of obtained copolymers was studied by scanning electron microscopy. The cyclic voltammetry investigation showed the electroactivity of poly [aniline‐co‐N‐(2‐hydroxyethyl) aniline] and N and O‐alkylated poly[aniline‐co‐N‐(2‐hydroxyethyl) aniline]. The conductivities of the polymers were 5 × 10^?5 S/cm for poly[aniline‐co‐N‐(2‐hydroxyethyl) aniline] and 5 ×10^?7 S/cm for the octadecyl‐substituted copolymer. The conductivity measurements were performed with a four‐point probe method. The solubility of the initial copolymer in common organic solvents such as N‐methyl‐2‐pyrrolidone and dimethylformamide was greater than polyaniline. The alkylated copolymer was mainly soluble in nonpolar solvents such as n‐hexane and cyclohexane. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Loading Metformin/Nettle Extract Lamium album L. subsp. Crinitum in Porous Hollow Silica Nanoparticle Coated by the Layer-by-Layer Method

Silicon - Metformin (MF) and L. albuman are used to treat type 2 diabetes. Diabetes causes problems such as blindness and albumin excretion. In this study, metformin, L. albuman and a composition...     

Synthesis of polymeric electrospun nanofibers for application in waterproof‐breathable fabrics

This study focuses waterproof‐breathable fabric development by applying electrospun web of polyurethane (PU), PAN, and PES directly onto the substrate fabric. Advantages of textile fabrics of elastomeric nanofibrous membranes over gortex specimen are the mass production feasibility, high elastomeric properties, more body comfort parameters, and fabric production without holes and needle traces formation. In this work, we identified the PU nanofibrous membrane as the best and useful web for application in waterproof‐breathable fabrics. Air permeability, water vapor transport rate, and resistance to water penetration average value for the prepared PU fibers web (sample of S1) were about 10 ml/s, 430 g/m²/24 h, 15 cm H₂O. To improve waterproof‐breathable characteristics of the membrane, the effects of electrospinning parameters on the fibers morphology and waterproof‐breathable characteristics were investigated. PU concentration of 12% (w/w) and electrospinning voltage of 12 kV were identified as optimal conditions to reach uniform and fine PU nanofibers formation without any beads. Air permeability, water vapor transport rate, and resistance to water penetration average value for the final sample were recorded as about 2.5 ml/s, 840 g/m²/24 h, and 44 cm H₂O, correspondingly. POLYM. ENG. SCI. 56:143–149, 2016. © 2015 Society of Plastics Engineers     

Kinetics of short‐duration ethylene polymerization with MgCl2‐supported Ziegler–Natta catalyst: Two‐stage initiation evidenced by changes in active center concentration

The kinetics of ethylene polymerization with a TiCl₄/MgCl₂‐type Ziegler–Natta catalyst was studied. Changes in polymerization activity and concentration of active centers ([C*]) in the first 5 min were determined. Initiation of the active centers was found to proceed in two stages. In the first stage, [C*]/[Ti] quickly rose to about 1% in less than 30 s and then remained stable in the subsequent 60 s. Then the [C*]/[Ti] value started to increase again, forming the second buildup stage. The polymerization activity was found to change roughly in parallel with the change in [C*]/[Ti]. Changes in the polymer/catalyst particle morphology and polymer molecular weight distribution with polymerization time were studied. A mechanistic model was proposed to explain the two‐stage kinetics: initiation of active sites on the outer surface of catalyst particles takes place in the first stage, and initiation of active sites buried inside the particles takes place in the second stage. These buried sites are released when the catalyst particles are fragmented by the expanding polymer phase. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45187.     

Thermal degradation behavior and kinetic studies of polyacrylamide gel in TiO2 nanoparticles synthesis

Polyacrylamide gel (PAMG) method is a simple, fast and cheap method used for the synthesis of a wide variety of nanopowders. However, no adequate results have been reported on the thermal degradation behavior of PAMG which can be very effective on the final product properties. In this work, thermal degradation behavior of PAMG in the presence of TiCl₄ as a precursor salt for synthesis of TiO₂ nanoparticles was examined in comparison with linear polyacrylamide (LPAM) and pure PAMG by thermogravimetry/differential thermal analysis. Their thermal degradation kinetics was investigated, as well. The results showed that thermal degradation of all samples occurred in two stages at different onset temperatures. Despite the high thermal stability of pure PAMG compared to LPAM, the presence of TiCl₄ as a mineral material in PAMG structure decreases the thermal degradation onset temperature, considerably. Furthermore for LPAM and PAMG, majority of weight loss occurs in the second stage, but in PAMG with TiCl₄ the weight loss occurs mainly at the first stage. For more detailed investigation, residual materials were characterized by Fourier transform infrared spectroscopy and X-ray diffraction (XRD) techniques, attributing this trend to the presence of mineral materials in PAMG structure. XRD and transmission electron microscopy were also applied to confirm anatase crystalline structure and nanoscale distribution of the TiO₂ particles synthesized via PAMG method.     

Effect of fatigue loading on wicking properties of polyamide 66 nanofiber yarns

The wicking phenomenon is of prime importance with regards to biomedical applications of nanofiber yarns such as suture yarns and tissue scaffolds. In such applications, the yarns are usually subjected to cyclic tensile forces and biological tensile stresses. There is a lack of science behind the effect of fatigue on wicking properties of nanofiber yarns and this work aims at exploring this venue. Wicking properties of polyamide 66 nanofiber yarns are investigated by tracing the color change in the yarn structure resulting from pH changes during the capillary rise of distilled water. Results show that applying cyclic loading increases equilibrium wicking height in the Lucus–Washburn equation, which is attributed to changes in the overall pore structure in the cyclic loaded yarn. The likely causes of these changes are studied by scanning electron microscope, which reveals disentangled, more or less aligned and parallel nanofibers with a smaller radius in the nanofibrous structure. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47206.     

Thermosensitive nanoparticles prepared from poly(N‐isopropylacrylamide‐acrylamide‐vinilpyrrolidone) and its blend with poly(lactide‐co‐glycolide) for efficient drug delivery system

Temperature‐responsive polymers have become increasingly attractive as carrier for the injectable drug delivery systems. In the present work, we have studied the preparation of poly(N‐isopropylacrylamide‐acrylamide‐vinilpyrrolidone) (NIPAAm‐AAm‐VP terpolymer) nanoparticulated terpolymer and its blend with poly(lactide‐co‐glycolide, PLGA; molar ratio of lactide/glycolid 1/3). Thermosensitive terpolymer, poly(NIPAAm‐AAm‐VP) was prepared by free‐radical polymerization in aqueous solution. The nanoparticles of poly(NIPAAm‐AAm‐VP) and its blend with PLGA containing naltrexone were prepared using the evaporation and w/o emulsion‐solvent evaporation methods, respectively. Nanoparticles prepared from terpolymer‐PLGA blend at low polymer concentration (5%) shows larger particle size (>300 nm) and higher drug content%. Various types of nanoparticles showed a burst release of less than 10% after 24 h . The results suggest that by regulating different variables, desired release profiles of naltrexone can be achieved using a blend of PLGA‐poly(NIPAAm‐AAm‐VP) nanoparticulate system. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

An investigation of the flocculation characteristics of polyacrylamide‐grafted chitosan

To investigate the flocculation characteristics of polyacrylamide (PAM)‐grafted chitosan, a series of PAM‐grafted chitosan copolymer (Chito‐g‐PAM1 to Chito‐g‐PAM4) have been synthesized by ceric ammonium nitrate‐induced solution polymerization technique in nitrogen atmosphere. The flocculation characteristics of the polymer samples (PAM, grafted and ungrafted chitosan) were studied by settling test and jar test methods in the colloidal suspensions of kaolin, iron ore, silica, and bentonite powder. It was found that the settling performance of Chito‐g‐PAM3 is best among the polymer samples. The jar test results indicate that the ungrafted chitosan has better water clarifying performance than both the PAM and grafted chitosan. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009