Nitritation performance in membrane-aerated biofilm reactors differs from conventional biofilm systems

Nitrogen removal via nitrite has gained increasing attention in recent years due to its potential cost savings. Membrane-aerated biofilm reactors (MABRs) are one potential technology suitable to achieve nitritation. In this study we compared lab scale MABRs with conventional biofilm reactors to evaluate the influence of environmental conditions and operational parameters on nitritation performance. The oxygen mass transfer rate is postulated as a crucial parameter to control nitritation in the MABR: Clean water measurements showed significant underestimation of the total oxygen mass transfer, however, accurate determination of the oxygen mass transfer coefficient (k_m) of the system could be achieved by adjusting the liquid-phase mass transfer resistance in the constructed model. Batch experiments at different initial ammonium concentrations revealed that the conventional biofilm geometry was superior for nitritation compared to MABRs. These differences were reflected well in estimates of the oxygen affinity constants of the key microbial players, AOB and NOB (K_O,AOB < K_O,NOB (in both systems) and K_O,NOB values smaller in the MABR vs. the conventional biofilm system). It also appeared that – in addition to oxygen limitation – the absolute and relative substrate concentrations in the biofilm (esp. of oxygen) are very important for successful nitritation. Initial biomass composition, furthermore, impacted reactor performance in the MABR systems indicating the need for appropriate inoculum choice.     

Purification and characterization of a protease from Pseudomonas aeruginosa grown in cutting oil

The Pseudomonas aeruginosa san-ai strain was isolated from water-soluble cutting oil used for cooling and lubrication during industrial metal-working processes. This strain, which is grown in a high alkaline (pH 10) mixture of surfactants and mineral oil, produces an extracellular proteolytic enzyme. We have purified and characterized this 18 kDa protease. The P. aeruginosa san-ai protease functions optimally at pH 9.0 and 60 degrees C. Additionally, it is a Zn-containing metalloenzyme, and its monomeric structure contains at least one disulfide bond. Because the enzyme is stable in the presence of organic solvents, it is suitable for peptide synthesis. Furthermore, the P. aeruginosa san-ai protease could be used in an intelligent drug delivery system (DDS) designed for applications in the metal industry for prevention of putrefaction of cutting oil.     

Development of a novel aptamer-based sensing system using atomic force microscopy

Atomic force microscopy (AFM) can dynamically detect the adhesion or affinity force between a sample surface and a cantilever. This feature is useful as a detection method using aptamers--single-strand DNA that recognizes its target with very high affinity. The present study proposes a novel DNA aptamer-based sensing system using AFM. In this study, thrombin was chosen as the target molecule, and a DNA aptamer-based AFM sensing system based on competition was developed. The affinity force between the gold chip and the cantilever decreased as the concentration of thrombin increased. Moreover, a low detection limit of 0.2 nM was achieved. Therefore, the AFM sensing system used would be appropriate for the measurement of various chemical compounds.     

Preparation of (0 2 0)-oriented BaTi2O5 thick films and their dielectric responses

Barium dititanate (BaTi₂O₅) thick films were prepared on a Pt-coated Si substrate by laser chemical vapor deposition, and ac electric responses of (0 2 0)-oriented BaTi₂O₅ films were investigated using several equivalent electric circuit models. BaTi₂O₅ films in a single phase were obtained at a Ti/Ba molar ratio (m_Ti/Ba) of 1.72–1.74 and deposition temperature (T_dep) of 908–1065 K as well as m_Ti/Ba = 1.95 and T_dep = 914–953 K. (0 2 0)-oriented BaTi₂O₅ films were obtained at m_Ti/Ba = 1.72–1.74 and T_dep = 989–1051 K. BaTi₂O₅ films had columnar grains, and the deposition rate reached 93 μm h^?1. The maximum relative permittivity of the (0 2 0)-oriented BaTi₂O₅ film prepared at T_dep = 989 K was 653 at 759 K. The model of an equivalent circuit involving a parallel combination of a resistor, a capacitor, and a constant phase element well fitted the frequency dependence of the interrelated ac electrical responses of the impedance, electric modulus, and admittance of (0 2 0)-oriented BaTi₂O₅ films.     

Effect of sintering temperature on the transparency and mechanical properties of lutetium aluminum garnet fabricated by spark plasma sintering

Transparent lutetium aluminum garnet (Lu₃Al₅O₁₂, LuAG) was fabricated by reactive spark plasma sintering. The effect of sintering temperature on the crystal phase, microstructure, transparency and mechanical properties of LuAG bodies was investigated. Fully dense and single-phase LuAG bodies were obtained at sintering temperatures 1573–1923 K. The average grain size increased from 0.18 to 0.52 μm with increasing sintering temperature from 1573 to 1773 K, and grain growth became significant at 1823 K. Transmittance showed a maximum value of 77.8% at 2000 nm at a sintering temperature of 1773 K after annealing at 1423 K in air for 43.2 ks. The Vickers hardness increased from 14.2 to 17.2 GPa with decreasing grain size from 7.45 to 0.23 μm.     

Bulk heterojunction organic solar cells utilizing 1,4,8,11,15,18,22,25-octahexylphthalocyanine

Bulk heterojunction solar cells utilizing soluble phthalocyanine derivative, 1,4,8,11,15,18,22,25-octahexylphthalocyanine (C6PcH₂) have been investigated. The active layer was fabricated by spin-coating the mixed solution of C6PcH₂ and 1-(3-methoxy-carbonyl)-propyl-1-1-phenyl-(6,6)C61 (PCBM). The photovoltaic properties of the solar cell with bulk heterojunction of C6PcH₂ and PCBM demonstrated the strong dependence of active layer thickness, and the optimized active layer thickness was clarified to be 120 nm. By inserting MoO₃ hole transport buffer layer between the positive electrode and active layer, the FF and energy conversion efficiency were improved to be 0.50 and 3.2%, respectively. The tandem organic thin-film solar cell has also been studied by utilizing active layer materials of C6PcH₂ and poly(3-hexylthiophene) and the interlayer of LiF/Al/MoO₃ structure, and a high V_oc of 1.27 V has been achieved.     

Growth and microstructure of Ba β-alumina films by laser chemical vapor deposition

Ba β-alumina films were prepared by laser chemical vapor deposition. Mostly single-phase Ba β-alumina films were obtained at 1125–1200 K and for an Al/Ba molar ratio of 12.4–16.6. BaAl₂O₄ and α-Al₂O₃ were codeposited with Ba β-alumina under Ba- and Al-rich conditions, respectively. The Ba β-alumina films consisted of hexagonal grains, and the (1 1 0)-oriented Ba β-alumina films had a fin-like columnar structure. The highest deposition rate reached 120 μm h^?1 at around 1200 K. A thin layer of Ba-rich superstructure was formed on the surface of the (1 1 0)-oriented columnar grains.     

Investigation of VFT surges propagated into transformer and overvoltages applied to winding

Investigations were conducted on the VFT (Very Fast Transient) surges that propagate into a 500‐kV transformer. The disconnector restriking surge and ground fault surged were discussed. It was regarded that a large part of the surge voltage was applied just at the entrance of the transformer winding for the VFT surges. Thus, an equivalent circuit that models the windings was used for the analysis. The overvoltages that appear between the first winding sections at the entrance of the transformer were computed. The following was established. (1) The overvoltage between the first winding sections becomes greater when the magnitude of the voltage change at the transformer terminal is larger. The overvoltage between the first winding sections is not affected by the magnitude of the transformer terminal voltage. (2) For the disconnectors that are not connected directly to the transformer, the voltage change at the transformer terminal is not so large. (3) In the case of a ground fault at the GIS near the transformer, the voltage change at the transformer terminal is the same as that for a disconnector directly connected to the transformer. (4) In actual GIS, the disconnector that is connected directly to the transformer is not usually used. In this situation, the overvoltages that threaten the transformer insulation will not be generated by the restriking of the disconnectors. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 146(2): 20–26, 2004; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10225     

Optical and electrical anisotropies of polydiacetylene derivative film aligned by shear stress

The molecular alignment of polydiacetylene (PDA) derivatives and their optical and electrical properties of thin films based on PDA derivatives have been studied. The PDA derivatives were aligned depending on the direction of applied shear stress in the film. From measurements of the polarized absorption and current–voltage characteristics, the optical and electrical anisotropies have been observed, that was discussed by taking the PDA main chain alignment into consideration.     

Polymeric phosphonium salts as a novel class of cationic biocides. X. Antibacterial activity of filters incorporating phosphonium biocides

Phosphonium salts with different alkyl chains as substituents were incorporated covalently on the surfaces of cellulose filters with silane coupling agents containing phosphonium ions, and their surface antibacterial activities against Staphylococcus aureus and Escherichia coli were explored by the viable cell-counting method in sterile distilled water. The filters incorporating phosphonium biocides showed higher antibacterial activity, and its activity strongly depended on the structure of substituents. The surface-treated filters may be used to sterilize air and water, including microorganisms. © 1994 John Wiley & Sons, Inc.