Statistical estimate of mercury removal efficiencies for air pollution control devices of municipal solid waste incinerators

Although representative removal efficiencies of gaseous mercury for air pollution control devices (APCDs) are important to prepare more reliable atmospheric emission inventories of mercury, they have been still uncertain because they depend sensitively on many factors like the type of APCDs, gas temperature, and mercury speciation. In this study, representative removal efficiencies of gaseous mercury for several types of APCDs of municipal solid waste incineration (MSWI) were offered using a statistical method. 534 data of mercury removal efficiencies for APCDs used in MSWI were collected. APCDs were categorized as fixed-bed absorber (FA), wet scrubber (WS), electrostatic precipitator (ESP), and fabric filter (FF), and their hybrid systems. Data series of all APCD types had Gaussian log-normality. The average removal efficiency with a 95% confidence interval for each APCD was estimated. The FA, WS, and FF with carbon and/or dry sorbent injection systems had 75% to 82% average removal efficiencies. On the other hand, the ESP with/without dry sorbent injection had lower removal efficiencies of up to 22%. The type of dry sorbent injection in the FF system, dry or semi-dry, did not make more than 1% difference to the removal efficiency. The injection of activated carbon and carbon-containing fly ash in the FF system made less than 3% difference. Estimation errors of removal efficiency were especially high for the ESP. The national average of removal efficiency of APCDs in Japanese MSWI plants was estimated on the basis of incineration capacity. Owing to the replacement of old APCDs for dioxin control, the national average removal efficiency increased from 34.5% in 1991 to 92.5% in 2003. This resulted in an additional reduction of about 0.86 Mg emission in 2003. Further study using the methodology in this study to other important emission sources like coal-fired power plants will contribute to better emission inventories.     

PER1, GUP1 and CWH43 of methylotrophic yeast Ogataea minuta are involved in cell wall integrity

In eukaryotes, the glycosylphosphatidylinositol (GPI) modification of many glycoproteins on the cell surface is highly conserved. The lipid moieties of GPI‐anchored proteins undergo remodelling processes during their maturation. To date, the products of the PER1, GUP1 and CWH43 genes of the yeast Saccharomyces cerevisiae have been shown to be involved in the lipid remodelling. Here, we focus on the putative GPI remodelling pathway in the methylotrophic yeast Ogataea minuta. We found that the O. minuta homologues of PER1, GUP1 and CWH43 are functionally compatible with those of S. cerevisiae. Disruption of GUP1 or CWH43 in O. minuta caused a growth defect under non‐permissive conditions. The O. minuta per1Δ mutant exhibited a more fragile phenotype than the gup1Δ or cwh43Δ mutants. To address the role of GPI modification in O. minuta, we assessed the effect of these mutations on the processing and localization of the O. minuta homologues of the Gas1 protein; in S. cerevisiae, Gas1p is an abundant and well‐characterized GPI‐anchored protein. We found that O. minuta possesses two copies of the GAS1 gene, which we designate GAS1A and GAS1B. Microscopy and western blotting analysis showed mislocalization and/or lower retention of Gas1Ap and Gas1Bp within the membrane fraction in per1Δ or gup1Δ mutant cells, suggesting the significance of lipid remodelling for GPI‐anchored proteins in O. minuta. Localization behaviour of Gas1Bp differed from that of Gas1Ap. Our data reveals, for the first time (to our knowledge), the existence of genes related to GPI anchor remodelling in O. minuta cells.     

Preparation of electrospun siloxane-poly(lactic acid)-vaterite hybrid fibrous membranes for guided bone regeneration

A nonwoven fabric scaffold for guided bone regeneration (GBR) consisting of siloxane-poly(lactic acid) (PLA)-vaterite hybrid material (SiPVH) was prepared by an electrospinning method. To improve the cellular compatibility of the fabric, the fibers were completely coated with hydroxyapatite (HA) by soaking in simulated body fluid. The HA-coated SiPVH nonwoven fabric contained large-sized spaces and showed the ability of releasing soluble silica and calcium species, which have previously been reported to stimulate osteogenic cells at the genetic level. A new type of GBR membrane was prepared by bonding SiPVH fabric with PLA nonwoven fabric with small-sized pores for preventing the intrusion of soft tissue. The resultant bi-layered membrane was expected to be effective not only for having an open structure for bone formation and a barrier to soft tissue, but also for enhancing bone growth by the release of ionic species.     

Comparison of δ13C and 14C activities of CO2 samples combusted in closed-tube and elemental-analyzer systems

For combustion of organic samples, a closed tube-combustion (CTC) method is generally used, but this method requires much time and labor. The AMS facility at the Center for Chronological Research, Nagoya University, has established a CO₂ production and purification system using an elemental analyzer (EA) connected to cryogenic traps. This system enables faster combustion and CO₂ purification of samples than does the conventional CTC method. We compared measured carbon yields, δ¹³C values and ¹⁴C activities between EA and CTC samples of carbon standards of various sample quantities. This newly developed EA system had low background ¹⁴C activity due to sample preparation; the background activity was similar to that observed for the CTC method. The EA system also showed high precision and accuracy for δ¹³C and ¹⁴C measurements. The EA sample data obtained from conventional quantities (>1 mg carbon) of standards showed good agreement with the results obtained by the CTC method and with the consensus values, though background contamination was detected for samples containing <0.5 mg carbon. Oxalic acid standards containing <0.5 mg carbon that were analyzed by the CTC method tended to have widely varying values of carbon yield, δ¹³C and ¹⁴C activity, suggesting that the CO₂ produced by combustion might have been prone to adsorption to an inner wall of the combustion tube, to CuO or to both, and that the CO₂ produced in the CTC method might have decomposed.     

Strigolactones Modulate Salicylic Acid-Mediated Disease Resistance in Arabidopsis thaliana

Strigolactones are low-molecular-weight phytohormones that play several roles in plants, such as regulation of shoot branching and interactions with arbuscular mycorrhizal fungi and parasitic weeds. Recently, strigolactones have been shown to be involved in plant responses to abiotic and biotic stress conditions. Herein, we analyzed the effects of strigolactones on systemic acquired resistance induced through salicylic acid-mediated signaling. We observed that the systemic acquired resistance inducer enhanced disease resistance in strigolactone-signaling and biosynthesis-deficient mutants. However, the amount of endogenous salicylic acid and the expression levels of salicylic acid-responsive genes were lower in strigolactone signaling-deficient max2 mutants than in wildtype plants. In both the wildtype and strigolactone biosynthesis-deficient mutants, the strigolactone analog GR24 enhanced disease resistance, whereas treatment with a strigolactone biosynthesis inhibitor suppressed disease resistance in the wildtype. Before inoculation of wildtype plants with pathogenic bacteria, treatment with GR24 did not induce defense-related genes; however, salicylic acid-responsive defense genes were rapidly induced after pathogenic infection. These findings suggest that strigolactones have a priming effect on Arabidopsis thaliana by inducing salicylic acid-mediated disease resistance.     

Methyl Yellow: A Potential Drug Scaffold for Parkinson's Disease

Parkinson's disease (PD) is an age‐related neurodegenerative disease affecting movement. To date, there are no currently available therapeutic agents which can prevent or slow disease progression. Here, we evaluated an azobenzene derivative, methyl yellow (MY), as a potential drug scaffold for PD; its inhibitory activity toward monoamine oxidase B (MAO‐B) as well as drug‐like properties were investigated. The inhibitory effect of MY on MAO activity was determined by a MAO enzyme inhibition assay. In addition, the in vitro properties of MY as a drug candidate (e.g., blood–brain barrier (BBB) permeability, serum albumin binding, drug efflux through P‐glycoprotein (P‐gp), drug metabolism by P450, and mitochondrial toxicity) were examined. In vivo effectiveness of MY was also evaluated in the 1‐methyl‐4‐phenyl‐1,2,3,6‐tetrahydropyridine (MPTP) Parkinsonian mouse model. MY selectively inhibited MAO‐B in a dose‐dependent and reversible manner. MY was BBB‐permeable, bound relatively weakly to serum albumin, was an unlikely substrate for both systems of P‐gp and P450, and did not cause mitochondrial toxicity. Results from the MPTP Parkinsonian mouse model indicated that, upon treatment with MY, neurotoxicity induced by MPTP was mitigated. Investigations of MY demonstrate its inhibitory activity toward MAO‐B, compliant properties for drug consideration, and its neuroprotective capability in the MPTP Parkinsonian mouse model. These data provide insights into potential use, optimization, and new design of azobenzene derivatives for PD treatment.     

Thallium-201 scintigraphy to predict therapeutic outcome of iodine-131 therapy of metastatic thyroid carcinoma

We studied the relationship between 201Tl uptake and the efficacy of radioiodine therapy in thyroid carcinoma. METHODS: Forty-four patients with metastases of well-differentiated thyroid carcinoma received 201Tl scintigraphy within the 2 mo before their initial 131I therapy. Patients were classified into two groups according to the tumor-to-background (T/B) ratio on the late 201Tl scan: high 201Tl uptake (T/B > or = 2.1) and low 201Tl uptake (T/B < 2.1). The therapeutic outcome was judged by the percent reduction in the tumor diameter at 6 mo after the treatment. The treatment was defined as effective when the tumor showed more than 50% reduction in the tumor diameter. The patients in whom radioiodine was ineffective were followed up to determine if the tumor showed further growth. RESULTS: Of the 44 patients, 25 had high 201Tl uptake and 19 had low 201Tl uptake. The therapy was effective in 15 patients and was ineffective in 29. All the patients in whom radioiodine was effective had low 201Tl uptake. On the other hand, 25 of 29 patients in whom radioiodine was ineffective had high 201Tl uptake. Eight patients, in whom radioiodine was ineffective despite good 131I uptake, had high 201Tl uptake. There were no significant differences in the positive predictive value and the negative predictive value for effective treatment between 201Tl scintigraphy and therapeutic dose 131I scintigraphy. Among the 25 patients in whom radioiodine was ineffective and who had high 201Tl uptake, the tumor diameter increased in 7 (28%). However, none of the tumors with low 201Tl uptake increased in size during the follow-up period. CONCLUSION: Thallium-201 scintigraphy has a high predictive value for the efficacy of radioiodine therapy in metastatic thyroid carcinoma. Thus, it is helpful in determining the indication for radioiodine therapy and it seems to be an adjunct to tracer dose 131I scintigraphy.     

Measurement of Elastic Moduli from the Impact Sound of Engineering Ceramics and Composites at Elevated Temperatures

A simple instrumentation system is developed for determining the elastic moduli of engineering ceramics and their composites from the sound produced by the impact of a sphere on a specimen which is suspended by thin wires or ceramic threads in a furnace. The natural frequencies of the flexural and torsional vibration modes are measured from the impact noise by using a fast Fourier transform analyzer. Elastic moduli are then computed from those frequencies by using Timoshenko's beam theory and also Saint-Venant's torsion theory. The validity of the measurementmethod is demonstrated by room-temperature tests on ceramic and metallic specimens of known elastic moduli. SiAION and Al-Al₂O₃ composites are tested at elevated temperatures up to 900°C. It is shown that the Young's and shear moduli of the materials tested decrease with an increase in temperature, while Poisson's ratio remains almost constant.     

Multi‐primary‐color LCD: Its characteristics and extended applications

Abstract— The development of multi‐primary‐color (MPC) display systems is one of the big paradigm shifts in recent display technologies and induces new potentials of display devices. The development of MPC display systems for different goals is briefly reviewed. Especially, by employing MPC systems, it is possible to reproduce the real material colors faithfully and efficiently. For signal processing, MPC systems have a big advantage in the so‐called color‐reproduction redundancy. A number of applications can be derived from this characteristic, such as improving the viewing‐angle dependency issue and power savings. On the other hand, MPC systems have a typical trade‐off versus RGB‐standardized input signals, especially for reproducing bright green. New algorithms to moderate this trade‐off on MPC systems by employing color‐reproduction redundancy are proposed. The goal of our algorithms is to maintain the compatibility with RGB‐based input signals though the initial display design so that the characteristics of MPC systems are not changed or lost. These algorithms indicate that MPC display systems are applicable not only for a specifically limited objective but also for other applications, e.g., TV broadcasting.