Deposition of boron doped DLC films on TiNb and characterization of their mechanical properties and blood compatibility

Abstract

Diamond-like carbon (DLC) material is used in blood contacting devices as the surface coating material because of the antithrombogenicity behavior which helps to inhibit platelet adhesion and activation. In this study, DLC films were doped with boron during pulsed plasma chemical vapor deposition (CVD) to improve the blood compatibility. The ratio of boron to carbon (B/C) was varied from 0 to 0.4 in the film by adjusting the flow rate of trimethylboron and acetylene. Tribological tests indicated that boron doping with a low B/C ratio of 0.03 is beneficial for reducing friction (μ = 0.1), lowering hardness and slightly increasing wear rate compared to undoped DLC films. The B/C ratio in the film of 0.03 and 0.4 exhibited highly hydrophilic surface owing to their high wettability and high surface energy. An in vitro platelet adhesion experiment was conducted to compare the blood compatibility of TiNb substrates before and after coating with undoped and boron doped DLC. Films with highly hydrophilic surface enhanced the blood compatibility of TiNb, and the best results were obtained for DLC with the B/C ratio of 0.03. Boron doped DLC films are promising surface coatings for blood contacting devices.     

Multivariate curve resolution analysis on the multi-component water sorption process into a poly(2-methoxyethyl acrylate) film

In our previous study, sorption process of water into a biocompatible polymer film, poly(2-methoxyethyl acrylate) (PMEA) was monitored by time-resolved in situ attenuated total reflection infrared (ATR-IR) spectroscopy [S. Morita, et al., Langmuir 23, 3750 (2007)]. In the present study, noisy and heavily overlapped O-H stretching vibrational bands of diffusing water have been analyzed from the series spectra where the spectral shapes change irregularly with time. In spite of these complications, a powerful spectral analysis technique, multivariate curve resolution (MCR) by means of alternating least squares (ALS), yielded smooth and meaningful pure component spectra and detailed kinetic sorption profiles of each component, excluding noise. Ordinary smoothing techniques and Gaussian curve fitting would not achieve these significant results. The quantification of the kinetic parameters such as amplitudes (a) and relaxation time constants (tau) is significant for the systematic development of biocompatible materials and also for revealing the mechanisms of biocompatibility of a material. Moreover, the ratios of coefficients of each component at saturation corresponded well to the values obtained by Tanaka et al. measured by gravimetric analysis. This study is the first to report the detailed concentration profile of each water component whose sorption kinetics is discussed comprehensively.     

Growth of Cu2ZnSnS4 thin films on Si (100) substrates by multisource evaporation

Cu₂ZnSnS₄ films were grown on Si (100) by vacuum evaporation using elemental Cu, Sn, S and binary ZnS as sources. X-ray diffraction patterns of films grown at different substrate temperatures indicated that polycrystalline growth was suppressed and the orientational growths were relatively induced in a film grown at higher temperatures. Tetragonal structure of Cu₂ZnSnS₄ films was confirmed by studying RHEED patterns. The existence of c-axis ([001] direction) growth, two kinds of a-axis (〈100〉 direction) growth and four kinds of {112} twins which can be classified as two symmetrical pairs is proposed. Broad emissions at around 1.45 eV and 1.31 eV were observed in the photoluminescence spectrum measured at 13 K.     

Fracture- and Indentation-Induced Structural Changes of Sodium Borosilicate Glasses

It is known that indentation using a diamond indenter induces permanent densification to result in plastic or inelastic deformation of glass. However, it is still unclear whether a high tensile stress causes such a structural change or not. In this study, fracture- and indentation-induced structural changes of glasses with the compositions of 20 Na₂O − 40x B₂O₃ – (80−40x) SiO₂ (in mol%, x = 0, 0.5, 1, 1.5) are investigated. Two-point bending tests of the glass fibers are performed to apply a high tensile stress to the glasses, and Vickers indentation tests of the glasses are also carried out for comparison. The structural change of the glass is evaluated by using Raman spectroscopy. It is elucidated that a tensile side of the fractured fiber for every composition shows a permanent structural change, which is characterized by a lower wave number shift of Raman peak assigned to the Si-O-Si bending vibration mode. It is also found that the behaviors of Raman peaks of the fractured fiber are opposite to those of the indented glass under a high compressive stress.     

Chemical analysis and acetylcholinesterase inhibitory effect of anthocyanin-rich red leaf tea (cv. Sunrouge)

BACKGROUND: The purpose of this study was to evaluate the effects of leaf order or crop season on anthocyanins and other chemicals in the anthocyanin‐rich tea cultivar ‘Sunrouge’ (Camellia sinensis x C. taliensis) by using high‐performance liquid chromatography, and to study the effect of ‘Sunrouge’ extract on acetylcholinesterase (AChE) activity in human neuroblastoma SK‐N‐SH cells. RESULTS: The total anthocyanin content was higher in the third (3.09 mg g^?1) than in the second (2.24 mg g^?1) or first crop season (1.79 mg g^?1). The amount of anthocyanins contained in the stem was high (1.61 mg g^?1). In the third crop season, the concentrations of delphinidin‐3‐O‐β‐D ‐(6‐(E)‐p‐coumaroyl)galactopyranoside (DCGa), cyanidin‐3‐O‐β‐D ‐(6‐(E)‐p‐coumaroyl)galactopyranoside, delphinidin‐3‐O‐β‐D ‐galactopyranoside, delphinidin‐3‐O‐β‐D ‐(6‐O‐(Z)‐p‐coumaroyl)galactopyranoside, cyanidin‐3‐O‐β‐D ‐galactoside, and delphinidin‐3‐O‐β‐D ‐glucoside were 1.57 mg g^?1, 0.52 mg g^?1, 0.40 mg g^?1, 0.22 mg g^?1, 0.14 mg g^?1, and 0.11 mg g^?1, respectively. DCGa accounted for about 50% of the anthocyanins present. The suppressive effect of ‘Sunrouge’ water extract on AChE activity in human neuroblastoma SK‐N‐SH cells was the strongest among the three tea cultivars (‘Sunrouge’, ‘Yabukita’ and ‘Benifuuki’). CONCLUSION: These results suggested that ‘Sunrouge’ might protect humans from humans from AChE‐related diseases by suppressing AChE activity. To obtain sufficient amounts of anthocyanins, catechins and/or caffeine for a functional food material, ‘Sunrouge’ from the third crop season should be used. Copyright © 2012 Society of Chemical Industry     

Antibacterial action on pathogenic bacterial spore by green tea catechins

Antibacterial effects of catechins, the major green tea polyphenols, were studied using Clostridium and Bacillus spores. Incubation with crude catechins decreased the number of C botulinum and C butyricum spores but not B cereus spores. Furthermore, the effects of six catechin derivatives on spores were investigated. (−)‐Epicatechin gallate (ECg), (−)‐epigallocatechin (EGC), (−)‐epigallocatechin gallate (EGCg) and (+)‐gallocatechin gallate (GCg) were more effective in decreasing C botulinum and C butyricum spore numbers than (+)‐catechin (C) and (−)‐epicatechin (EC). The vegetative growth of C botulinum and B cereus was inhibited by crude extracts of the catechins. Specifically, purified GCg and EGCg inhibited the vegetative growth of C botulinum and B cereus. The inhibitory effect of ECg on B cereus was similar to that of GCg. However, toxin‐production by B cereus was not inhibited by catechin. Damage to the membrane of C butyricum spores by catechin derivatives was shown using fluorescent microscopy. This study shows that low concentrations of catechins, although requiring a long exposure time, inhibited the growth of bacterial spores. However, the effects of the purified derivatives of the catechins were not the same and GCg and EGCg were found to be the most potent. Spores that are generally resistant to many disinfectants were sensitive to catechins. Copyright © 2005 Society of Chemical Industry     

Antimicrobial activity of nutmeg against Escherichia coli O157

We examined the difference between Escherichia coli O157 and non-pathogenic E. coli in their tolerance to spices. Various spices (5 g each) were homogenized at 25 degrees C for 10 min with 5 ml of 70% ethyl alcohol, and the supernatant solutions obtained by centrifugation were used as spice extracts. When the E. coli strains were incubated with each spice extract at concentrations of 0.01% and 0.1%, a noteworthy difference was observed between the O157 and non-pathogenic strains in their tolerance to nutmeg. The populations of the non-pathogenic strains could not be reduced, but those of the O157 strains were remarkably reduced. Antibacterial activity by the nutmeg extract was also found against the enteropathogenic E. coli O111, but not against enterotoxigenic (O6 and O148) and enteroinvasive (O29 and O124) E. coli. When we examined the antibacterial effect of volatile oils in nutmeg on the O157 and non-pathogenic E. coli strains, all O157 strains tested were found to be more sensitive to beta-pinene than non-pathogenic E. coli strains.     

Effect of Temperature Change on Interfacial Behavior of an Acoustically Levitated Droplet

Under the microgravity environment, new and high quality materials with a homogeneous crystal structure are expected to be manufactured by undercooling solidification, since the material manufacturing under the microgravity environment is more static than that under the normal gravity. However, the temperature change on the interface of the material in space can affect on the material processing. The purpose of the present study is to investigate effect of the temperature change of interface on the large levitated droplet interface. A water droplet levitated by the acoustic standing wave is heated by YAG laser. In order to heat the water droplet by the laser heating, rhodamine 6G is solved in it to achieve high absorbance of the laser. The droplet diameter is from 4 to 5.5 mm. The deformation of the droplet interface is observed by high speed video camera. The temperature of droplet is measured by the radiation thermometer. It is noticed that the larger droplet under the higher sound pressure tends to oscillate remarkably by the laser heating.     

Selective enumeration of viable Enterobacteriaceae and Pseudomonas spp. in milk within 7 h by multicolor fluorescence in situ hybridization following microcolony formation

Rapid and simultaneous enumeration of viable Enterobacteriaceae and viable Pseudomonas spp. in milk was achieved by using multicolor fluorescence in situ hybridization (FISH) with oligonucleotide probes based on 16S ribosomal RNA (rRNA) sequences in combination with a microcolony growth method (multicolor microcolony-FISH; MMC-FISH). The procedure of MMC-FISH method is rather simple; that is milk clearing, filtration of cells, incubation, hybridization and enumeration. Enumeration of targeted bacteria in logarithmic growth phase, stationary phase, or in a starved state in milk by MMC-FISH required 5-7 h, while it took 1-3 days to test for Escherichia coli and Pseudomonas putida by the conventional culture method. The numbers of E. coli and P. putida in each phase or in a starved state in milk determined by MMC-FISH were almost the same or greater than the number of colony forming units determined by the plate counting method. The MMC-FISH allows rapid examination of contamination in milk by viable Enterobacteriaceae and Pseudomonas spp. with growth potential.