Thermal conductivity of neptunium dioxide

The thermal diffusivity of neptunium dioxide was measured in the temperature range from 473 to 1473 K by using a laser flash method. The thermal diffusivity slightly decreased with increasing temperature in the temperature range investigated. The heat capacity of NpO₂ was measured in the temperature range from 334 to 1071 K by using a drop calorimetry method. The heat capacity of NpO₂ determined in this study was slightly larger than that of UO₂ and about 7% smaller than that of PuO₂. The thermal conductivity of NpO₂ was determined from the thermal diffusivity, the heat capacity and the bulk density. It was found that the thermal conductivity of NpO₂ from 873 to 1473 K lay between those of UO₂ and PuO₂.     

Accretion of titanium carbide by electrical discharge machining with powder suspended in working fluid

A surface modification method by electrical discharge machining (EDM) with a green compact electrode has been studied to make thick TiC or WC layer. Titanium alloy powder or tungsten powder is supplied from the green compact electrode and adheres on a workpiece by the heat caused by discharge. To avoid the production process of the green compact electrode, a surface modification method by EDM with powder suspended in working fluid is proposed in this paper. After considering flow of working fluid in EDM process, the use of a thin electrode and a rotating disk electrode are expected to keep powder concentration high in the gap between a workpiece and an electrode and to accrete powder material on the workpiece. The accretion machining is tried under various electrical conditions. Titanium powder is suspended in working oil like kerosene. TiC layer grows a thickness of 150 μm with a hardness of 1600 Hv on carbon steel with an electrode of 1 mm in diameter. When a disk placed near a plate rotates in viscous fluid, the disk drags the fluid into the gap between the disk and the plate. Therefore, the powder concentration in the gap between a workpiece and a rotational disk electrode can be kept high. A wider area of the accretion can be obtained by using the rotational electrode with a gear shape.     

Effect of Hydrogen Atmosphere on Pyrolysis of Cured Polycarbosilane Fibers

SiC-based fibers with various chemical compositions were synthesized using an irradiation-curing process. Polycarbosilane (PCS) fibers were cured by irradiation with an electron beam in a helium atmosphere. The cured PCS fibers were pyrolyzed at 1300°C under controlled hydrogen or argon atmospheres, and SiC fibers with C/Si of 0.84 to 1.56 were obtained. The fibers consisted of <1.0 wt% O, <0.2 wt% N, <0.1 wt% H, with the balance being Si and C. The mechanism of pyrolytic transformation of cured PCS to SiC-based ceramics was investigated using TG/DTA analysis. Greater mass losses were observed during pyrolysis in a hydrogen atmosphere than in argon. This result suggests that the hydrogen atmosphere suppresses H₂ evolution and helps to remove excess carbon as CH₄ during pyrolysis. The microstructure and mechanical properties of the resulting SiC-based fibers were found to be very dependent on their C/Si chemical compositions.     

Geological characteristics of landslides triggered by the 2016 Kumamoto earthquake in Mt. Aso volcano,Japan

On 16 April 2016, a M_w 7.0 earthquake occurred in Kumamoto city, Japan. The main shock induced two large landslides, namely the Aso Bridge landslide and the Aso Volcanological Laboratory landslide. Their topographical and geological conditions and motion features were investigated by using an unmanned aerial vehicle (UAV) and portable dynamic cone penetration tests (PPTs). The Aso Bridge landslide lies between elevations of 385 m and 725 m, with a total estimated volume of about 1,980,000 m³. The main body is composed of cohesive soil with lapilli and block. The Aso Volcanological Laboratory landslide lies on a slope between 483 m to 582 m, and the total volume is about 81,000 m³, with an average thickness of 4.5 m. The main body is composed of Kusasenrigahama volcanic pumice tephra beds. The material compositions and deposits of both landslides have low cohesion and easily induced shear failure for the two landslides. The sliding distance of the Aso Bridge landslide was long, the sliding direction almost unchanged from the scarp to the toe, and the sliding speed was rapid. The sliding distance of the Aso Volcanological Laboratory landslide, however, was short, the sliding direction changed from the N-direction at the scarp to the NW-direction at the toe, and the sliding speed was slow.

     

Experimental study of squirrel-caged damper structure for superconducting generator

In this paper a double-layer damper is developed which will consist of a squirrelcaged warm damper and a cylindrical cold damper as a part of a 70-MW superconducting generator development project. To evaluate the characteristics of unbalance current capability, magnetic shielding and damping for rotor swing, a one-half scale rotor model is constructed and an experimental study is made. From analysis of the experimental results, design guidelines have been developed and the FEM magnetic field analysis technique is refined. The main results are summarized as follows:

• 1 The squirrel-caged warm damper has sufficient capability against negative sequence current;
• 2 Damping characteristics can be designed to be effective near the rotor swing frequency;
• 3 Flux shielding at low frequencies corresponding to quick response excitation is sufficiently small so as not to prevent field flux change; and
• 4 Magnetic field can be analyzed by the refined FEM field analysis technique which now takes into account the effects of the rotor end region by estimating the end resistance based on the eddy current flow path.