Criteria for versatile GaN MOVPE tool:high growth rate GaN by atmospheric pressure growth

Growth rate has a direct impact on the productivity of nitride LED production.Atmospheric pressure growth of GaN with a growth rate as high as 10μm/h and also Al_0.1Ga_0.9N growth of 1μm/h by using 4 inch by 11 production scale MOVPE are described.XRD of（002） and（102） direction was 200 arcsec and 250 arcsec, respectively.Impact of the growth rate on productivity is discussed.     

Benzobisthiazole as Weak Donor for Improved Photovoltaic Performance: Microwave Conductivity Technique Assisted Molecular Engineering

New donor–acceptor‐type copolymers comprised of benzobisthiazole (BBTz) as a weak donor rather than acceptor are proposed. This approach can simultaneously lead to deepening the HOMO and LUMO of the polymers with moderate energy offset against fullerene derivatives in bulk heterojunction organic photovoltaics. As a proof‐of‐concept, BBTz‐based random copolymers conjugated with typical electron acceptors: thienopyrroledione (TPD) and benzothiadiazole (BT) based on density functional theory calculations are synthesized. Laser‐flash and Xe‐flash time‐resolved microwave conductivity (TRMC) evaluations of polymer:[6,6]‐phenyl C₆₁ butyric acid methyl ester (PCBM) blends are conducted to screen the feasibility of the copolymers, leading to optimization of processing conditions for photovoltaic device application. According to the TMRC results, alternating BBTz‐BT copolymers are designed, exhibiting extended photoabsorption up to ca. 750 nm, deep HOMO (–5.5 to –5.7 eV), good miscibility with PCBM, and inherent crystalline nature. Moreover, the maximized PCE of 3.8%, the top‐class among BBTz‐based polymers reported so far, is realized in an inverted cell using TiO_x and MoO_x as the buffer layers. This study opens up opportunities to create low‐bandgap polymers with deep HOMO, and shows how the device‐less TRMC evaluation is of help for decision‐making on judicious molecular design.     

A circuit technology for high-speed battery-operated 16-Mb CMOSDRAM's

A battery-operated 16-Mb CMOS DRAM with address multiplexing has been developed by using an existing 0.5-μm CMOS technology. It can access data in 36 ns when powered from a 1.8-V battery-source, and 20 ns at 3.3 V. However, this device requires a mere 57 mA of operating current for an 80-ns cycle time and only 5 μA of standby current at 3.3 V. To achieve both high-speed and low-power operation, the following four circuit techniques have been developed: 1) a parallel column access redundancy (PCAR) scheme coupled with a current sensing address comparator (CSAC), 2) an N&PMOS cross-coupled read-bus-amplifier (NPCA), 3) a gate isolated sense amplifier (GISA) with low V_T, and 4) a layout that minimizes the length of the signal path by employing the lead on chip (LOC) assembly technique     

Solar energy powered Rankine cycle using supercritical CO2

A solar energy powered Rankine cycle using supercritical CO₂ for combined production of electricity and thermal energy is proposed. The proposed system consists of evacuated solar collectors, power generating turbine, high-temperature heat recovery system, low-temperature heat recovery system, and feed pump. The system utilizes evacuated solar collectors to convert CO₂ into high-temperature supercritical state, used to drive a turbine and thereby produce mechanical energy and hence electricity. The system also recovers heat (high-temperature heat and low-temperature heat), which could be used for refrigeration, air conditioning, hot water supply, etc. in domestic or commercial buildings. An experimental prototype has been designed and constructed. The prototype system has been tested under typical summer conditions in Kyoto, Japan; It was found that CO₂ is efficiently converted into high-temperature supercritical state, of while electricity and hot water can be generated. The experimental results show that the solar energy powered Rankine cycle using CO₂ works stably in a trans-critical region. The estimated power generation efficiency is 0.25 and heat recovery efficiency is 0.65. This study shows the potential of the application of the solar-powered Rankine cycle using supercritical CO₂.     

New type of tin support for hydroprocessing catalyst

TiN supported molybdenum sulfide catalysts showed much higher activity for cleavage of C-C bonds than oxide supported molybdenum sulfide catalysts, indicating the possibility of a new generation of supports for hydroprocessing catalysts.     

Barosensitivity in Saccharomyces cerevisiae is Closely Associated with a Deletion of the COX1 Gene

High hydrostatic pressure causes physical stress to microorganisms; therefore, this technology may be applied to food pasteurization without introducing the unfavorable effects of thermal denaturation. However, its application is limited to high‐value foods because the treatment requires a robust steel vessel and expensive pressurization equipment. To reduce these costs, we studied the pasteurization of Saccharomyces cerevisiae using relatively moderate high‐pressure levels. A mutant strain isolated by ultraviolet mutagenesis showed significant loss of viability under high‐pressure conditions. Gene expression analysis of the mutant strain revealed that it incurred a deletion of the COX1 gene. Our results suggest that the pressure‐sensitivity can readily be introduced into industrial/food microorganisms by complementing a COX1 deleted mitochondria.     

Breeding of a high tyrosol‐producing sake yeast by isolation of an ethanol‐resistant mutant from a trp3 mutant

A novel breeding strategy for a high tyrosol‐producing sake yeast was developed by isolating an ethanol‐resistant mutant from a tryptophan auxotrophic mutant of a sake brewery yeast. Since tyrosol has antioxidant, cardioprotective and taste‐sharpening effects, increasing the tyrosol level of alcohol beverages could be beneficial in alcohol production. Since the transporters of aromatic amino acids are degraded by several stresses and mutants defective in the synthesis of aromatic amino acids are sensitive to ethanol, it was hypothesized that the degradation of these transporters should be inhibited in ethanol resistant mutants isolated from the auxotrophic mutants of aromatic amino acids, and that the uptake of aromatic amino acids would be increased in the mutants. Consistent with this hypothesis, sake was brewed with the ethanol‐resistant mutant of a tryptophan auxotrophic mutant and the sake was found to contain a lesser content of tyrosine and a higher content of tyrosol relative to the sake brewed with the parental strains. The taste of the sake brewed with the mutant strain could be discriminated from the sake brewed with the parental strains, probably because of the altered concentrations of tyrosol and certain amino acids and organic acids. The results suggest that combining the isolation of an ethanol‐resistant mutant and an auxotrophic mutant is an effective method to breed a brewing strain with a modified metabolism of these substances. Copyright © 2012 The Institute of Brewing & Distilling     

Stress corrosion cracking of aged Al---4%Cu alloy in NaCl solution

Stress-corrosion lives and pitting potentials of Al---4%Cu alloys with various aging structures have been measured in de-aerated 1M NaCl under conditions of controlled potential. It was found that the alloys aged having the higher susceptibility to stress-corrosion cracking showed two pitting potentials corresponding to pitting at grain boundaries and grain bodies, respectively. The susceptibility to stress corrosion cracking of the alloys appeared above the pitting potentials for grain boundaries. The maximum susceptibility to stress-corrosion cracking was obtained when the alloy was aged to attain the largest difference in pitting potentials between grain boundaries and grain bodies.