Effect of electro-chemical properties of sodium salts of various anions on their diffusional parameters in symmetrical cellulose acetate membranes

A relation was obtained between electro-chemical properties of sodium salts (NaCl, NaBr, and Na₂SO₄), and the thermodynamic property of permeability in symmetrical cellulose acetate membranes, the distribution coefficient K and the kinetic property, the overall diffusion coefficients D. K and D were obtained by the method we proposed using measured unsteady- and steady-state dialysis data. The K values increase with the increase of water content and are in the range of 10⁻² for sodium halides and 10⁻³ for Na₂SO₄. D is found to increase with the increase of the solute concentration, and the extrapolated values of D to zero concentration D⁽⁰⁾ are obtained as 0.015–0.03 μm²/s and increase with the increase of water content in the membrane. D can be divided into the concentration independent diffusion coefficients in the dense part of the membrane D_d and in the porous D_p, applying a two-part (perfect or dense and imperfect or porous) model of the membrane. Contrary to D_d, D_p increases with the increase of W_w and can be correlated as D_p,c = _d exp (γ × W_w). It is shown that the averaged D_d, _D increases with the increase of the quantity of the ionic mobility u of the solutes at infinite dilution divided by valence, and that the parameter γ increases with the increase of the ionic mobility u. The value of K increases slightly with the increase of water content and decreases with the increase of the Flory—Huggins parameter χ. The Flory—Huggins parameter χ is calculated from the measured values of distribution coefficients and data obtained from the literature. And it was found that the gradient of linear decrease of χ (λ_cation) depends on equivalent ionic conductivity of anion of salt, λ_an.     

A novel assay method for glycosphingolipid deacylase by enzyme-linked immunochemical detection of lysoglycosphingolipid

Lysoglycosphingolipids consist of a sphingoid long-chain base and monosaccharide or complex sugar, and they lack the fatty acyl group present in native glycosphingolipids. Less than 1 pmol of lyso-Forssman glycolipid and lysoganglioside GM1 were detected on a thin-layer chromatogram by an enzyme-linked immunochemical coloration method with anti-Forssman glycolipid antibody (FOM-1) and cholera toxin B subunit, respectively. Each spot between 1 and 100 pmol lyso-Forssman glycolipid was immunostained as densely as that of the same amount of native Forssman glycolipid. The density of the lyso-Forssman glycolipid spots increased proportionally with increment in the amount of lysoglycolipid. The density of spots of 0.2–100 pmol lysoganglioside GM1 was also proportional to the amount of each lyso-GM1 spot. These results indicated that less than 1 to 100 pmol of deacylated glycosphingolipid was quantifiable by the immunochemical coloration method with sugar chain-specific antibodies. Glycosphingolipid deacylase, which cleaved an amide bond between the sphingoid long-chain base and fatty acyl chain in ceramide of glycosphingolipid, was assayed by detecting the lyso-Forssman glycolipid produced. Lipophilic compounds, recovered from an aliquot of the reaction mixture of Forssman glycolipid and crude enzyme at appropriate times, were analyzed by thin-layer chromatography. It was found that lyso-Forssman glycolipid was produced in the first 1–2 h by the enzyme and production increased with incubation time. This coloration method is more sensitive and specific than the visualization method with a non-specific reagent such as orcinol-sulfuric acid reagent.     

Microwave dielectric properties and crystal structures of Mg0.7Al2.2O4 and Mg0.4Al2.4O4 ceramics with defect structures

Mg_0.7Al_2.2O₄ and Mg_0.4Al_2.4O₄ ceramics with cation vacancies were synthesized using the molten salt method, and the relationships between the microwave dielectric properties and crystal structures of these materials were investigated. The ²⁷Al NMR spectra of these ceramics indicate that the preferential occupation of tetrahedral sites by Al³⁺ cations was enhanced by the introduction of cation vacancies. The λ values of Mg_0.7Al_2.2O₄ and Mg_0.4Al_2.4O₄ ceramics fired at 1600°C, which correspond to the fraction of Al³⁺ cations in tetrahedral sites, were 0.37 and 0.60, respectively. Crystal structure refinements using the Rietveld method suggest that cation vacancies are preferentially located at octahedral sites in both ceramics. The ε_r and Q·f values of a Mg_0.7Al_2.2O₄ ceramic fired at 1600°C were 7.7 and 201 111 GHz, respectively, while those of a Mg_0.4Al_2.4O₄ ceramic fired at 1600°C were 7.5 and 232 301 GHz, respectively. These data demonstrate that the preferential occupation of tetrahedral sites by Al³⁺ cations following the introduction of cation vacancies enhances the Q·f value.     

Mixed powder coating film using thermoplastic polyester and its alkaline resistance

To improve alkaline resistance, a newly mixed powder coating film using thermoplastic polyethylene terephthalate (PET) was investigated. Two kinds of polyvinyl butyral (PVB) and two kinds of polyamide (PA) were chosen as the secondary polymer. The melting temperatures (T _ms) of these materials were lower than that of primary PET polymer so the mixed powder coating was able to form a dual phase film through a fluidized bed coating process. Microscope and Fourier transform infrared spectroscopy (FTIR) observations revealed that the dual phase structure was indeed successfully formed and there was a secondary layer over the entire surface area of the film. This mixed powder coating film significantly enhanced the alkaline resistance to an environment filled with NaOH solution at 40°C in which a secondary material would be effective in protecting the film. With regard to both alkaline resistance and film formability, PET/PVB was superior to the PET/PA mixture.     

Ethanol production from raw starch by a recombinant yeast having saccharification and fermentation activities

In order to develop a method for converting raw starch into ethanol efficiently, direct fermentation of ozonized raw starch using a recombinant yeast was investigated. Ozonolysis was carried out as a pretreatment to convert raw starch into ethanol rapidly and efficiently, and then the effect of the ozone degradation conditions on the degree of polymerization and the amount of amylose in a raw starch was determined. Since the degree of polymerization was low and the amount of amylose was high, raw starch treated with an ozone concentration of 40 gm^?3 and an ozonation time of 30 min was the material chosen for alcohol fermentation. Though the recombinant yeast could not convert the untreated raw starch, it converted the soluble starch and the ozonized raw starch at a comparatively high yield into ethanol. About 56% of the ozonized raw starch decomposed, and the ethanol concentration obtained from the ozonized raw starch was markedly greater than that obtained from untreated raw starch. The dynamic behavior of cell growth, substrate degradation, and ethanol production was examined in a continuous culture under various dilution rates, and the optimal dilution rate, ie 0.15 h^?1, was determined for maximizing the ethanol productivity (amount of ethanol produced per unit time). © 2002 Society of Chemical Industry     

Effects of pressure and temperature on dyeing acrylic fibres with basic dyes in supercritical carbon dioxide

The dyeing of acrylic fibre with CI Basic Blue 47 has been investigated using an ammonium carboxylate perfluoropolyether as an auxiliary in order to perform the reverse micellar system in supercritical carbon dioxide media. The basic dye was satisfactorily solubilised in the interior of the reverse micelle in the system, and dyeability in the supercritical carbon dioxide media was excellent, even in the absence of a retardant and/or an acid. The optimum proton-rich condition for dyeing of acrylic fabric is performed in reverse micelle aggregates and the proton-rich water pool is suitable for dye uptake by the fibre even without the presence of additives. Changes in glass transition temperature of acrylic fibre in the carbon dioxide media also influence the dyeing behaviour of acrylic fabric.     

Structure and viscoelastic properties of epoxy resins prepared from four-nuclei novolacs

The relation between the structure and the viscoelastic properties of seven kinds of epoxy resins was studied. Seven tetraglycidylethers were synthesized from four-nuclei novolacs in which the positions of methylene linkage or number of kind of substituents were different. These epoxy compounds were cured with diaminodiphenylmethane as a hardener. From the viscoelastic properties of the fully cured resins with the hardener, characteristic properties such as glass transition temperature (T_g), average molecular weight between crosslinking points (M̄_c), and front factor (ϕ) were obtained. It was concluded that higher linearity in the main chain of epoxy resins gave a cured resin with a higher T_g, a smaller M̄_c, and a larger ϕ.     

Effect of Hydrogen Atmosphere on Pyrolysis of Cured Polycarbosilane Fibers

SiC-based fibers with various chemical compositions were synthesized using an irradiation-curing process. Polycarbosilane (PCS) fibers were cured by irradiation with an electron beam in a helium atmosphere. The cured PCS fibers were pyrolyzed at 1300°C under controlled hydrogen or argon atmospheres, and SiC fibers with C/Si of 0.84 to 1.56 were obtained. The fibers consisted of <1.0 wt% O, <0.2 wt% N, <0.1 wt% H, with the balance being Si and C. The mechanism of pyrolytic transformation of cured PCS to SiC-based ceramics was investigated using TG/DTA analysis. Greater mass losses were observed during pyrolysis in a hydrogen atmosphere than in argon. This result suggests that the hydrogen atmosphere suppresses H₂ evolution and helps to remove excess carbon as CH₄ during pyrolysis. The microstructure and mechanical properties of the resulting SiC-based fibers were found to be very dependent on their C/Si chemical compositions.     

Synthesis of novel organocobalt poly(arylene-vinylene)s containing (cyclobutadiene)cobalt moieties in the main chain

Summary Organocobalt poly(arylene-vinylene)s composed of 1,2- or 1,3- linkage at their cyclobutadiene moieties (3 and 4, respectively) were prepared by the Heck reaction of p-divinylbenzene with (cyclobutadiene)cobalt-containing monomers having two aryl bromide moieties (1 and 2, respectively). The number average molecular weights (M _n) of the obtained organocobalt poly(arylene-vinylene)s (3 and 4) were 4,100 and 4,000, respectively (GPC, on the basis of polystyrene). UV-vis spectra of 3 and 4 exhibited main π-π^* absorption peaks at 362 and 397 nm, respectively, which were ca. 60 nm bathochromically shifted from those of the corresponding monomeric units. Both polymers were found to show thermotropic liquid crystallinity in the range of room temperature to ca. 80 °C by employing differential scanning calorimetry (DSC) and the optical measurement using crossed polarizers. Received: 2 July 1999/Accepted: 29 July 1999     

Structural motif of phosphate-binding site common to various protein superfamilies: all-against-all structural comparison of proteinmononucleotide complexes

In order to search for a common structural motif in the phosphate-bindingsites of protein–mononucleotide complexes, we investigatedthe structural variety of phosphate-binding schemes by an all-against-allcomparison of 491 binding sites found in the Protein Data Bank.We found four frequently occurring structural motifs composedof protein atoms interacting with phosphate groups, each ofwhich appears in different protein superfamilies with differentfolds. The most frequently occurring motif, which we call thestructural P-loop, is shared by 13 superfamilies and is characterizedby a four-residue fragment, GXXX, interacting with a phosphategroup through the backbone atoms. Various sequence motifs, includingWalker's A motif or the P-loop, turn out to be a structuralP-loop found in a few specific superfamilies. The other threemotifs are found in pairs of superfamilies: protein kinase andglutathione synthetase ATPase domain like, actin-like ATPasedomain and nucleotidyltransferase, and FMN-linked oxidoreductaseand PRTase.