抗菌塑料为生活提供更安全的保护

众所周知，微生物，如藻类、细菌、霉菌(真菌和酵母)以及病毒可在物品的表面寄生和存活，尤其是当死角、粗糙的表面或微缝中有残存的营养物质时，微生物…在聚合物表面的生长可导致褪色、污渍、臭味、生物膜、交叉感染并最终降低机械强度，降低产品使用寿命。汽巴可为解决上述的问     

Plan for first phase of safety demonstration tests of the High Temperature Engineering Test Reactor (HTTR)

Safety demonstration tests using the High Temperature Engineering Test Reactor (HTTR) will be conducted for the purpose of demonstrating inherent safety features of High Temperature Gas-cooled Reactors (HTGRs) as well as providing the core and plant transient data for validation of HTGR safety analysis codes. The first phase safety demonstration test items include the reactivity insertion test and the coolant flow reduction test. In the reactivity insertion test, which is the control rod withdrawal test, one pair out of 16 pairs of control rods is withdrawn, simulating a reactivity insertion event. The coolant flow reduction test consists of the partial loss of coolant flow test and the gas circulators trip test. In the partial loss of coolant flow test, primary coolant flow rate is slightly reduced by control system. In the gas circulators trip test one and two out of three gas circulators are run down, simulating coolant flow reduction events. The gas circulators trip tests, in which position of control rods are kept unchanged, are simulation tests of anticipated transients without scram (ATWS).     

Magnetic Behavior of Some Rare-Earth Transition-Metal Perovskite Oxide Systems

Magnetic properties were investigated for the rare-earth 3d-transition metal oxides with the perovskite structure. Intriguing magnetic phenomena were reviewed for a few systems:magnetization peak effect in the titanates, magnetization reversal in the chromites and metallic ferromagnetism in the cobahites. The results suggest an important role of the rare-earth ions for the magnetic properties of such complex oxides.     

A novel polarizer‐free dye‐doped polymer‐dispersed liquid crystal for reflective TFT displays

Abstract— A novel preparation method for dichroic dye‐doped polymer‐dispersed liquid crystals has been developed. This was achieved by creating a porous polymer matrix first by washing out the liquid crystal from a polymer‐dispersed liquid crystal (PDLC), which is then refilled with dye‐doped liquid crystal. Optimizing the liquid crystal used in the refilling results in decreased turn‐on voltage and faster response time. Poster‐standard reflectivity and newspaper‐standard contrast was demonstrated with a 3.8‐in. QVGA reflective TFT display with a drive voltage of 10 V.     

HDPE膜预辐照接枝VBTAC制备阴离子交换膜

在氮气保护下,利用预辐照接枝技术在高密度聚乙烯(HDPE)膜上接枝苯乙烯三甲基氯化铵(VBTAC)单体,以甲基丙烯酸二甲氨基乙酯(DMAEMA)单体作为接枝辅助单体来提高VBTAC的接枝率,制备出阴离子交换膜,解决了在HDPE上难以直接接枝聚合VBTAC的问题.本文研究了接枝条件及接枝液的组分对接枝的影响,并用X射线显微分析方法研究了VBTAC的接枝进程和接枝分布.     

Blind source extraction of long-term physiological signals from facial thermal images

The amount of mental work using information equipment has been increasing because of a rapid growth of an information society. Accumulation of short-term mental work can cause various stresses and a disturbance of circadian rhythm and lead to fatigue, anxiety, and distraction. Estimation and understanding the physiopsychological states is desired for decreasing or controlling stresses to maintain health. There have been several investigations on the assessment of short-term physiopsychological states using infrared thermography. However, the method has been used rarely for assessing long-term physiopsychological states. In the present study, extraction of independent components related to long-term physiological signals is attempted by applying independent component analysis to facial thermal images obtained over 6 months (July–December). Furthermore, multiple regression analysis is attempted to create psychological model by facial thermal images. As the result, extracted independent components are shown to represent the strong features in nasal, mouth, cheek, eyebrow, and forehead regions. Attempting multiple regression analysis, features in nasal and mouth regions contributed to depression or dejection mood, features in cheek, eyebrow and forehead regions contributed to fatigue and features in tip of nasal, eyebrow and mouth regions contributed to state anxiety.     

Image blurring of thick specimens due to MeV transmission electron scattering: a Monte Carlo study

Image blurring of MeV transmission electrons for gold nanoparticles on the top surface of micrometer-thick specimens has been investigated using the Monte Carlo simulation. Both the simulated line density profile and therefore image blurring were in good agreement with the experimental ones in the ultrahigh voltage electron microscope. Quantitative effects of specimen thickness and electron energy on image blurring were presented, in which the specimen thickness had a greater influence. Image blurring was demonstrated to be caused mainly by multiple elastic scattering, but it could be reduced to several nanometers for a 5?μm thick epoxy-resin specimen at the electron energy of 2?MeV.     

Self‐consistent electrical parameter extraction from bias dependent spectral response measurements of III‐V multi‐junction solar cells

Spectral response of multi‐junction solar cell is complicated because of the interplay between external measurement conditions such as bias light intensity, monochromatic light intensity, bias voltage, and intrinsic electrical properties of series interconnected subcells. In this paper, we report an experimental study on the bias voltage‐dependent spectral response (SR) for multi‐junction solar cell. A self‐consistent iteration loop was developed from a nonlinear least square Powell hybrid algorithm that was used for curve fitting the experimental SR versus bias voltage data of each subcell. We demonstrated for the first time that this approach enabled us to derive the electrical parameters such as dark saturation currents (J₀), shunt resistance (R_sh), series resistance (R_s), and spectra response (J_photo) for each subcell of a Ga_0.99In_0.01As/Ge dual junction solar cell with stable convergence. The accuracies of the fitting results were confirmed by the agreement between the J–V curves calculated on the basis of these parameters and the experimental J–V curve of multi‐junction solar cell measured under AM1.5 and 1 sun condition. Copyright © 2013 John Wiley & Sons, Ltd.     

Novel functional polymers: Poly(dimethylsiloxane)–polyamide multiblock copolymer. III. Synthesis and surface properties of disiloxane–aromatic polyamide multiblock copolymer

Disiloxane–aromatic polyamide(aramid) multiblock copolymers(2SiPASs) were synthesized using 1,3-bis(3-aminopropyl)-1,1,3,3-tetramethyldisiloxane(BATS) as an analog of aramidsilicone resin consisting of aromatic polyamide and poly(dimethylsiloxane) (PDMS). 2SiPASs afford a transparent and toughened plastic film. The surface properties of 2SiPAS were investigated by X-ray photoelectron spectroscopy (xps) and static contact angle measurement. The results of surface analysis suggested that BATS content of the 2SiPAS surface increased with increasing BATS content in bulk. The interaction between the platelets and the 2SiPAS surface was found to be very weak when the BATS content reached 26 wt % in bulk. © 1996 John Wiley & Sons, Inc.     

Development of a new heterojunction structure (ACJ -HIT) and its application to polycrystalline silicon solar cells

A new solar cell structure named HIT (Heterojunction with Intrinsic Thin layer) has been developed based on new artificially constructed junction (ACJ) technology. In this structure a non-doped a-Si thin layer was inserted between the p(a-Si)/n(c-Si) heterojunction, improving the output characteristics and achieving a conversion efficiency of 18.1%. This structure was applied to cast polycrystalline silicon solar cells of a practical size. A high conversion efficeincy of 13.6% was obtained with a cell size of 10 cm × 10 cm using various technologies, including hydrogen plasma passivation.