Predictive Simulation of Deformation and Failure of Peat-Calcareous Soil Layered Ground Due to Multistage Test Embankment Loading

The continuous behaviour of a ground-embankment system from the stage of deformation up to failure was predicted with respect to an actual test embankment that had been constructed in stages on a soft ground made up of peat and calcareous soil. The behaviour prediction was carried out by employing soil-water coupled finite deformation analysis, which also included simulation of the embankment construction process. The information used in the analysis was limited to such things as the results of soil tests on soil materials (peat and calcareous soil) sampled from the ground, including their sensitivity ratios, and the embankment's construction history. The SYS Cam-clay model was used in the constitutive equations of the soils to determine the material constants of the soils and the initial conditions of the ground, and the computations were performed under plane strain conditions. As a result, the computed profiles of W-type ground settlement and of slip surfaces running through the embankment were found to be in good overall agreement with the actual profiles measured at the site. Furthermore, we found that this slippage is attributable to the undrained shear response of the soil elements in the calcareous soil layer, where slippage begins to occur during embankment loading. In other words, the slippage is caused by the rapid softening behaviour caused by the degradation of structure after the effective stress ratio reaches the vicinity of the critical state line.     

含黏粒砂土场地液化离心机振动台试验研究

提出了含黏粒砂土模型地基制备、饱和与均匀性监测技术,利用ZJU-400土工离心机振动台开展了相同相对密度含黏粒砂土（黏粒含量10%）和洁净砂的地震液化模型试验,再现了水平场地地震液化现象,揭示了含黏粒砂土场地液化灾变特点。弯曲元波速监测表明,模型制备均匀性良好,相同条件下含黏粒砂土剪切波速比洁净砂低。而根据超静孔压消散与固结沉降观测分析发现,含黏粒砂土渗透系数比洁净砂低一个数量级,从而影响其液化前后超静孔压响应和应力应变行为。渗透性差异导致模型内超静孔压产生模式和消散速率显著不同,振动时含黏粒砂土模型浅层超静孔压累积比洁净砂慢,而深层则相反;震后含黏粒砂土孔压消散时间是洁净砂的15倍。液化过程中含黏粒砂土剪应力应变响应比相同深度处的洁净砂更显著,液化后其滞回圈应变较大、割线模量较小且阻尼比较大。土体液化沉降主要发生在液化后超静孔压消散过程,含黏粒砂土模型超静孔压消散时间更长,沉降量更大。上述成果为进一步研究含黏粒砂土地震响应分析及其液化判别提供了科学依据。     

Separation of C6H6 and C6H12 from H2 using ionic liquid/PVDF composite membrane

Ionic liquid/polyvinylidene fluoride composite membrane was successfully prepared by impregnation method and used for the separation on organic chemical hydride process. The separation factors of C₆H₆/H₂ and C₆H₁₂/H₂ in the ternary mixture system were 7500 and 300, respectively. The ionic liquid membrane showed an excellent possibility as a technology of H₂ purification in the organic chemical hydride process by removing aromatic hydrocarbon and cycloalkane simultaneously from the ternary system. © 2015 American Institute of Chemical Engineers AIChE J, 62: 624–628, 2016     

The Complete Loss of p53 Expression Uniquely Predicts Worse Prognosis in Colorectal Cancer

p53 immunohistochemistry is considered an accurate surrogate marker reflecting the underlying TP53 mutation status and has utility in tumor diagnostics. In the present study, 269 primary CRCs were immunohistochemically evaluated for p53 expression to assess its utility in diagnostic pathology and prognostication. p53 expression was wild-type in 59 cases (23%), overexpressed in 143 cases (55%), completely lost in 50 cases (19%), and cytoplasmic in 10 cases (4%). p53 immunoreactivity was associated with tumor size (p = 0.0056), mucus production (p = 0.0015), and mismatch repair (MMR) system status (p < 0.0001). Furthermore, among CRCs with wild-type p53 expression, a significantly higher number of cases had decreased CDX2 than those with p53 overexpression (p = 0.012) or complete p53 loss (p = 0.043). In contrast, among CRCs with p53 overexpression, there were significantly fewer ALCAM-positive cases than p53 wild-type cases (p = 0.0045). However, no significant association was detected between p53 immunoreactivity and the “stem-like” immunophenotype defined by CDX2 downregulation and ALCAM-positivity. Multivariate Cox hazards regression analysis identified tubular-forming histology (hazard ratio [HR] = 0.17, p < 0.0001), younger age (HR = 0.52, p = 0.021), and female sex (HR = 0.55, p = 0.046) as potential favorable factors. The analysis also revealed complete p53 loss (HR = 2.16, p = 0.0087), incomplete resection (HR = 2.65, p = 0.0068), and peritoneal metastasis (HR = 5.32, p < 0.0001) as potential independent risk factors for patients with CRC. The sub-cohort survival analyses classified according to chemotherapy after surgery revealed that CRC patients with wild-type p53 expression tended to have better survival than those with overexpression or complete loss after chemotherapy. Thus, immunohistochemistry for p53 could be used for the prognostication and chemotherapy target selection of patients with CRC.     

Mutation Analysis of Radioresistant Early-Stage Cervical Cancer

Radiotherapy is a definitive treatment for early-stage cervical cancer; however, a subset of this disease recurs locally, necessitating establishment of predictive biomarkers and treatment strategies. To address this issue, we performed gene panel-based sequencing of 18 stage IB cervical cancers treated with definitive radiotherapy, including two cases of local recurrence, followed by in vitro and in silico analyses. Simultaneous mutations in KRAS and SMAD4 (KRAS^mt/SMAD4^mt) were detected only in a local recurrence case, indicating potential association of this mutation signature with radioresistance. In isogenic cell-based experiments, a combination of activating KRAS mutation and SMAD4 deficiency led to X-ray resistance, whereas either of these factors alone did not. Analysis of genomic data from 55,308 cancers showed a significant trend toward co-occurrence of mutations in KRAS and SMAD4. Gene Set Enrichment Analysis of the Cancer Cell Line Encyclopedia dataset suggested upregulation of the pathways involved in epithelial mesenchymal transition and inflammatory responses in KRAS^mt/SMAD4^mt cancer cells. Notably, irradiation with therapeutic carbon ions led to robust killing of X-ray-resistant KRAS^mt/SMAD4^mt cancer cells. These data indicate that the KRAS^mt/SMAD4^mt signature is a potential predictor of radioresistance, and that carbon ion radiotherapy is a potential option to treat early-stage cervical cancers with the KRAS^mt/SMAD4^mt signature.     

H∞ control and filtering with initial uncertainty for infinite dimensional systems

The H_∞-control problem with a non-zero initial condition for infinite dimensional systems is considered The initial conditions are assumed to be in some subspace. First the H_∞ problem with full information is considered and necessary and sufficient conditions for the norm of an input-output operator to be less than a given number are obtained, The characterization of all admissible controllers is also given. This result is then used to solve the general H^∞ control problem and the filtering problem with initial uncertainty. The filtering problem on finite horizon involves the estimate of the state at final time. The set of all suboptimal filters is given both on finite and infinite horizons.     

Thermal diffusivity and porosity of solid materials by the electromagnetic ultrasonic technique. Part 3—simultaneous measurement of ultrasonic velocity and thermal diffusivity

The objective of this study is to evaluate simultaneously the time dependence of the thermal diffusivity of carbon-carbon composites (C/C composites) and their porosity during heat treatment using the electromagnetic ultrasonic technique. This paper describes two kinds of experiments conducted to confirm the principle for simultaneous measurement of both the ultrasonic velocity (used to evaluate the porosity) and the thermal diffusivity at room temperature. For each material, the samples used in both experiments were identical. The ultrasonic velocity of type 304 stainless steel and its thermal diffusivity were 5.85 km/s and 3.8 mm²/s with precisions of ±1.6 and ±8 percent, respectively. The ultrasonic velocity of a two-dimensional woven C/C composite and its thermal diffusivity were 2.86 km/s and 4.8 mm²/s with precisions of ±5.0 and ±8 percent, respectively. The results appear to indicate that the electromagnetic ultrasonic technique can measure the ultrasonic velocity and the thermal diffusivity simultaneously and that it is also applicable to C/C composites. © 1997 Scripta Technica, Inc. Heat Trans Jpn Res, 25(5): 308–322, 1996     

Influence of DLC coating thickness on tribological characteristics under sliding rolling contact condition

Diamond-like-carbon (DLC) coating of thickness 3 and 10 μm were developed with and without radical nitriding pretreatment on steel rollers and spur gear pair. The friction coefficient and wear amount were evaluated under sliding rolling contact condition in vacuum and under oil lubrication. Delamination of coatings was observed at the interface of the substrate. The wear resistance of coatings improved with the thickness of the coating. In vacuum both the roller and the gear pair of 10 μm coating thickness with radical nitriding showed identical wear behavior. The radical nitriding seemed to enhance the life of DLC coatings.