Effect of applying voltage on photocatalytic destruction of 1,4-dioxane in aqueous system

In the current work, we prepared a TiO₂ coating on stainless mesh using electrophoretic deposition (EPD), and applied voltage to a stainless mesh to examine the synergy effect on photocatalysis of both 1,4-dioxane and ethylene glycol diformate (EGDF), a main intermediate of the photocatalysis of 1,4-dioxane. The photocatalytic decomposition rate of 1,4-dioxane depends on applying voltage under diffusion-limited reaction conditions. Ethylene glycol diformate and 1,4-dioxane exhibited inverse voltage dependence. Voltage swing provides high-efficiency photocatalysis of 1,4-dioxane while suppressing EGDF formation. This method will be effective for a photocatalysis system containing several chemicals, each with different voltage dependence.     

Development of lateral displacement sensor for real‐time detection of structural damage

We have developed a novel sensor that enables us to measure the relative story displacement of a building structure in real time. This lateral displacement sensor (LDS) is composed of a light‐emitting diode (LED) array, which is fixed on the ceiling, and a position‐sensitive detector (PSD) unit, which is placed on the floor. We optimized the LDS to achieve high accuracy in lateral displacement measurement. The accuracy was evaluated to be 60 µm by conducting shaking table tests. Two LDSs were implemented in an actual building equipped with an active variable stiffness (AVS) system, and the building was vibrated with seismic waveforms by an exciter placed on the rooftop. The seismic displacement of the second floor relative to the first floor was measured using the LDS. Furthermore, the inclination angle of the second floor could be measured using the LDS during the seismic vibration. Using the AVS system, we realized the residual displacement of the second floor without inducing damage to the building, and succeeded in real‐time residual displacement measurement for the first time. These results indicate that the LDS is useful for the health diagnosis of a building structure. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

A nonlinear model to rank association rules based on semantic similarity and genetic network programing

Many methods have been studied for mining association rules efficiently. However, because these methods usually generate a large number of rules, it is still a heavy burden for the users to find the most interesting ones. In this paper, we propose a novel method for finding what the user is interested in by assigning several keywords, like searching documents on the Web using search engines. By considering both the semantic similarity between the rules and keywords, and the statistical information like support, confidence, chi-squared value, etc. we could rank the rules by a new method named RuleRank, where evolutionary methods are applied to find the optimal ranking model. Experiments show that our approach is effective for the users to find what they want. Copyright © 2009 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Sinterability of various high-purity magnesium oxide powders

The sinterability of high-purity MgO powders with different production histories was investigated to make clear the relationship between the powder characterization, the densification processes, and the changes in microstructure both with increasing temperature at a rate of 10° C min^–1 and at a fixed temperature of 1450° C for 5 h. The densification behaviour and the changes in microstructure of these compressed bodies were affected chiefly by their original surface activity and degree of agglomeration, depending on the production histories: (i) the ultra-fine and well-dispersed powder prepared by the vapour-phase oxidation process showed that densification proceeded with an appreciable grain growth with few closed pores remaining; (ii) powder derived from the sea-water magnesia process showed that the densification behaviour was affected by the species of magnesium salt, i.e. basic magnesium carbonate or magnesium hydroxide, used as a precursor; however, whichever magnesium salt was used, its sintered compact showed similar closed porosities and grain-size distributions; (iii) powder derived from the spark-discharge process contained skeletons of the original Mg(OH)₂ particles; however, the densification proceeded gradually with slow grain growth, reflecting the fact that the powder has a moderate surface area (36 m² g^–1). The sintered compact from (iii) had a small closed porosity and the smallest grain-size distribution among the compacts used in this investigation.     

Strain rate effects on viscoelastic crack bifurcation

The effects of applied strain rate on the viscoelastic crack bifurcation phenomenon in Polymethyl Methacrylate (PMMA) were investigated. It was still verified that the product $\text{σ}{}_{\mathrm{f}}\text{C}{}_{\mathrm{b}}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ was constant, as was already observed by Congleton and Petch, and Anthony, Chubb and Congleton, for brittle elastic materials, for any strain rate, where σ_f = the gross fracture stress and C_b= the main crack length until the bifurcation starts. However, it was found that the higher strain rate increases the main crack length C_b resulting in the decrease in the gross fracture stress σ_f and vice versa. This might be interpreted that the higher stress concentration at the initiation crack tip, which is realized by becoming more brittle due to the higher strain rate owing to the predominance of the elastic element in the viscoelastic material, decreases the gross fracture stress leading to the longer main crack length.     

好氧/厌氧污泥对17β-雌二醇的降解特性

采用好氧、厌氧交替运行的污水处理厂的活性污泥处理内分泌干扰物17β-雌二醇（E2）,分别考察了好氧和厌氧条件下,污泥对E2及其降解中间产物——雌酮（E1）的去除效果,同时考察了污泥混合液中碳源和氮源对E2降解的影响。结果表明,在好氧条件下,活性污泥对E2、E1均有很好的降解效果,E2的未检出时间均在70 min左右,E1的未检出时间均在110 min左右,添加碳源和氮源对E2的降解速率无显著影响。厌氧污泥对E2和E1的降解速率远小于好氧活性污泥的,添加碳源对E2、E1的降解有一定的抑制作用,而添加氮源可以促进对E1的降解,但对E2降解的影响较小。好氧条件下活性污泥对E2的降解符合一级反应动力学方程;厌氧条件下,特别是有NO3^--N存在的条件下,污泥对E2的降解不符合一级反应动力学。     

Batch foam separation of a soluble protein

Removal of protein dissolved in water by batch foam separation was conducted with using ovalbumin (OA) as a model protein in the light of wastewater treatment reducing organic loading. The removal efficiency had a maximum value near the i.e.p. of OA (pH 4.6); thus, most experiments were conducted at pH 4.6. Typical experimental conditions; superficial gas velocity, U(g): 1.97 x 10(-2)-5.37 x 10(-2)cm/s; initial bulk concentration of OA, C(i): ca. 0.05-0.25 g/L; liquid volume, V: 600 cm(3). A model estimating bulk concentration profile was proposed by taking into account a mass balance of the present system. The model predicted that OA could be removed perfectly, however, was not all removed experimentally. The residual OA concentration of the bulk liquid within the column reached plateau value, which correspond to ca. 18% of the initial OA concentration. The plateau value of the bulk concentration was attained for ca. 100-500 min with U(g)=1.97 x 10(-2)-5.37 x 10(-2)cm/s. Foaming ability test revealed that the foaming limit concentration of OA at pH 4.6 was 9.72 x 10(-3)g/L. These results suggested that OA molecules could be damaged by interaction of bubble surface in the dispersed phase, since there were the residual OA concentrations over the limit concentration. To take account of this phenomena and correct the model, average surface density, X(d), which should convert protein molecule into the denatured protein molecule, was introduced. The corrected model could explain well the time profile of OA bulk concentration.     

Multipoint cure monitoring of CFRP laminates using a flexible matrix sensor

Since a carbon fiber reinforced plastic (CFRP) structure is complicated in the adoption of integral molding, local molding faults such as under curing and dry spots are liable to occur. To solve this problem, the distribution of the degree of curing for the entire composite structure must be measured. In the present study, we propose a patch-type flexible matrix sensor based on permittivity measurements. Multiple electrodes and wirings are readily fabricated simultaneously using a photolithographic process. Moreover, the sensor has only m + n wirings for m × n sensors, and is thereby suitable for multipoint cure monitoring. We also constructed a method for estimating the degree of curing considering the effect of frequency dependence of the permittivity of resin and viscosity variation due to temperature change. Experiments of multipoint cure monitoring are carried out using a CFRP plate and an actual aircraft structure. As a result, we confirmed the effectiveness of this method by comparing with results using a conventional differential scanning calorimeter.