Atomistic origin of high-quality “novel SiON gate dielectrics”

We have investigated the effect of the oxygen incorporation into SiN films by the first principles calculations. The calculated results show that the oxygen incorporation tends to generate defect states in SiN band gap by forming dangling bonds and floating bonds of Si. Based on the calculated results, it is also indicated that the high quality SiON film can be fabricated by suppressing the incorporation of O atoms into the SiN film, reproducing the reported experiments.     

Selective Determination of Dopamine on a Boron‐Doped Diamond Electrode Modified with Gold Nanoparticle/Polyelectrolyte‐coated Polystyrene Colloids

Negatively charged gold nanoparticles (AuNPs) and a polyelectrolyte (PE) have been assembled alternately on a polystyrene (PS) colloid by a layer‐by‐layer (LBL) self‐assembly technique to form three‐dimensional (Au/PAH)₄/(PSS/PAH)₄ multilayer‐coated PS spheres (Au/PE/PS multilayer spheres). The Au/PE/PS multilayer spheres have been used to modify a boron‐doped diamond (BDD) electrode. Cyclic voltammetry is utilized to investigate the properties of the modified electrode in a 1.0 M KCl solution that contains 5.0 × 10^?3 M K₃Fe(CN)₆, and the result shows a dramatically decreased redox activity compared with the bare BDD electrode. The electrochemical behaviors of dopamine (DA) and ascorbic acid (AA) on the bare and modified BDD electrode are studied. The cyclic voltammetric studies indicate that the negatively charged, three‐dimensional Au/PE/PS multilayer sphere‐modified electrodes show high electrocatalytic activity and promote the oxidation of DA, whereas they inhibit the electrochemical reaction of AA, and can effectively be used to determine DA in the presence of AA with good selectivity. The detection limit of DA is 0.8 × 10^?6 M in a linear range from 5 × 10^?6 to 100 × 10^?6 M in the presence of 1 × 10^?3 M AA.     

The structure and maximal gain of CW-pumped GaP-AlGaP semiconductor Raman amplifier with tapers on both sides

GaP-AlGaP waveguide semiconductor Raman amplifiers (SRAs) tapered on both sides were fabricated by high-quality GaP-AlGaP liquid phase epitaxial growth using the temperature difference method with controlled vapor pressure (TDM-CVP), photolithography patterning, and reactive ion etching with PCl/sub 3/ gas. Although the finesse of the both-sides-tapered waveguide SRA is lower than previous values for straight or one-side-tapered waveguides, the CW-pumped gain was maximized, and a maximal gain of 4.2 dB was obtained. This letter presents the effect of tapered structures in SRA with CW pumping amplification.     

Dark-field transmission electron microscopy for a tilt series of ordering alloys: toward electron tomography

Here we show a technique to obtain a tilt series of dark-field (DF) transmission electron microscopy (TEM) images in ordering alloys for tomographic three-dimensional (3D) observations. A tilt series of DF TEM images of D1a-ordered Ni4Mo precipitates in a Ni-Mo alloy was successfully obtained by adjusting a diffraction condition for a superlattice reflection from the Ni4Mo precipitates. Since the superlattice reflection usually has a long extinction distance, dynamic diffraction effects such as thickness fringes can be suppressed to some extent with precise realignment of the diffraction condition. By using the tilt series of the DF TEM images, we attempted a computed TEM tomography to visualize 3D shapes and positions of the precipitates.     

Block Copolymer Permeable Membrane with Visualized High‐Density Straight Channels of Poly(ethylene oxide)

A simple fabrication, scalable to centimeter scale, of a permeable membrane made of block copolymer containing molecular transport channels is demonstrated by coating photo‐crosslinkable liquid‐crystalline block copolymer, consisting of poly(ethylene oxide) (PEO) and poly(methacrylate) (PMA) bearing stilbene (Stb) mesogens in the side chains (PEO₁₁₄‐b‐PMA(Stb)₅₂), onto a sacrificial cellulose acetate film substrate. After thermal annealing, perpendicularly aligned and hexagonally arranged PEO cylindrical domains with a surface density of 10¹¹ cm^?2 were formed and then fixed efficiently by photo‐crosslinking the stilbene moieties in the PMA(Stb) domains by [2 + 2] dimerization. The fully penetrating straight PEO cylindrical domains across the 480‐nm‐thick membrane were well‐defined and visualized as molecule‐transport channels. After exfoliated by removal of the cellulose acetate layer, the membrane could be transferred onto another substrate by either scooping or a horizontal lifting method. Throughout the processes, the fully penetrating PEO channels across the membrane are preserved to open at both ends. A simple permeation experiment demonstrates that rhodamine dyes permeate efficiently through the PEO cylindrical channels of the annealed membrane but not across a non‐annealed one.     

Fir laser emissions from population inversion transition by TEA-CO2 laser pumping

In this paper, the numerical analysis is given which is applicable for a TEA-CO₂ laser pumping in search of effective pumping method. The analysis also can estimate the optimum pressure for a given molecule and a given pulse laser. Also we report in this work many FIR laser emissions from population inversion transition which have never observed before using a TEA-CO₂ laser.     

Time division multiplexed OTDR system

A new technique to increase the effective sampling rate of an optical time-domain reflectometer using a time division multiplexing digital sampling averaging procedure is proposed. This permits an increase in distance measuring accuracy of an optical time-domain reflectometer.     

New method to measure scattering and total losses of optical fibres

The direct measurement of scattering and total losses of very good uniform optical fibres has been proposed and verified for the first time by analysing the scattering light with the variation of input launching power of an He-Ne laser by an optical attenuator. The scattered light has been detected by the cubic detector at different positions along the fibre.     

Transmission characteristics of optical waveguides with multiquantum-well structures

The fundamental modes in an optical waveguide with multiquantum-well structure are analysed by the matrix method. It is found that the separation between the propagation constants of the TE and TM waves is relatively large and that the equivalent planar slab guide approximation is available only for TE waves.     

Influence of side chain length on fluorescence intensity of ROMP-based polymeric nanoparticles and their tumor specificity in in-vivo tumor imaging

In this study, amphiphilic brush-like copolymers conjugated with short alkyl or long polymeric chains of various lengths are synthesized using ring-opening metathesis polymerization (ROMP) of substituted norbornadiene monomers followed by chemical transformations. These amphiphilic copolymers form spherical self-assemblies in aqueous media with diameters of 132-244 nm. The low critical aggregation concentration of these assemblies (2.5 × 10(-3) -1.4 × 10(-5) g/L) indicates that they are quite stable in dilute conditions. An appropriate length of polymer side chain that conjugates the polymer backbone with a hydrophobic ICG (indocyanine green) moiety enhanced the fluorescence intensities of these self-assemblies in aqueous solution as well as in tumor-bearing mice. A longer side chain conjugated with tumor targeting agents could significantly affect the tumor specificity of self-assemblies to a greater extent. The self-assemblies bearing hydrophilic tumor targeting agents, such as a glucosamine molecule and a cyclic RGD (arginine-glycine-asparatic acid) peptide, accumulated in tumor tissues with high selectivity, while those having a hydrophobic targeting agent, such as folate moieties, accumulated in tumor sites with low selectivity. The results demonstrated here unambiguously indicate that the fluorescence intensity and tumor specificity of self-assemblies are strongly affected by the length of side chains that conjugate with dyes and targeting agents.