Fabrication and operation limit of lead-free PTCR ceramics using BaTiO3–(Bi1/2Na1/2)TiO3 system

The electric properties of BaTiO₃–(Bi_1/2Na_1/2)TiO₃ (BT–BNT) solid solution ceramics were studied as a lead-free PTCR (positive temperature coefficient of resistivity) thermistor material usable over 130°C. For determining the maximum switching temperature T _s, the phase diagram of BT–BNT binary system was clarified. Two semiconductorization processes and their electric properties are described. The lanthanum(La)-doped BBNT ceramics sintered in air still showed dielectric behaviors, but the niobium(Nb)-doped ones had a low resistivity at room temperature, ρ _RT, on the order of 10³ Ωcm and showed a PTC behavior. Sintering under a low O₂ atmosphere produces BT–BNT ceramics with less than 10² Ωcm compared to those prepared in air. Our current research produced the BBNT ceramics with T _s values around 210°C by increasing the (Bi_1/2Na_1/2) content in the ceramics.     

Interaction of π-bonds of the silicon–silicon triple bond with alkali metals: An isolable anion radical upon reduction of a disilyne

The reduction of 1,1,4,4-tetrakis[bis(trimethylsilyl)methyl]-1,4-diisopropyltetrasila-2-yne 1 with an equivalent amount of alkali metal (Li, Na, K, KC₈) in THF produced the corresponding disilyne anion radicals 2a–c. Their EPR spectra are independent of the metals used in THF, indicating that the disilyne anion radical species exists as solvent-separated ion pairs in polar solvents. The one-electron reduction also occurred with potassium in toluene to produce the potassium salt of the anion radical 3, which was isolated as extremely air- and moisture-sensitive dark brown crystals. The molecular structure of 3 was established by X-ray crystallography, which showed that the potassium ion is solvated by one toluene molecule. The EPR spectrum of 3 in toluene showed the interaction of the anionic silicon atom with the K⁺ ion.     

Forecasting electric power generation in a photovoltaic power system for an energy network

Recently, there has been an increase in concern about the global environment. Interest is growing in developing an energy network by which new energy systems such as photovoltaic and fuel cells generate power locally and electrical power and heat are controlled with a communication network. We developed the power generation forecast method for photovoltaic power systems in an energy network. The method makes use of weather information and regression analysis. We carried out forecasting power output of the photovoltaic power system installed in Expo 2005, Aichi Japan. As a result of comparing measurements with prediction values, the average prediction error per day was about 26% of the measured power. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 167(4): 16–23, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20755     

Estimation of the radial distribution of the tangential velocity in a vortex chamber

The estimation of maximum tangential velocity becomes a very important factor for the estimation of performances of the vortex chamber. In this paper, a proposed flow model of how to estimate the maximum tangential velocity in the special form of the vortex chamber is described in detail. The pressure drop basing upon the rapid expansion by flowing from the inlet pipe into the cyclone body is estimated as half of the dynamic pressure in the inlet pipe.     

Simplified method for determining cadmium concentrations in rice foliage and soil by using a biosensor kit with immunochromatography

BACKGROUND: The behavior of cadmium in ecosystems needs to be monitored because of the human toxicity of this heavy metal. The need recently arose for a simple and quick on‐site test for trace levels of Cd in food and environmental samples. In response, an immunochromatographic assay kit for detecting Cd was manufactured by Kansai Electric Power Co. of Japan. This kit uses the antigen–antibody complex reaction between the Cd–EDTA complex and an anti‐Cd–EDTA antibody and shows the results in terms of the degree of color developed on a test paper. We previously reported the successful use of this kit to determine Cd concentrations in brown rice. Here, we applied the kit to the determination of Cd concentrations in rice foliage and soil. RESULTS: Cadmium in rice foliage was not extracted successfully by the method used for brown rice. However, it was successfully extracted by 0.1 mol L^?1 HCl solution at a rice foliage:HCl ratio of 1:20, and coexisting metals were removed sufficiently by the column treatment. The Cd concentrations determined by immunochromatographic assay were well correlated with the values obtained by acid decomposition and inductively coupled plasma mass spectrometry. The 0.1 mol L^?1 HCl‐extractable Cd concentration in soil was also determined successfully with the kit. CONCLUSION: Approximate Cd concentrations in rice plants and 0.1 mol L^?1 HCl‐extractable Cd concentrations in soil can be monitored easily and quickly by this method at locations where facilities for acid digestion and precision analysis are not available. Copyright © 2009 Society of Chemical Industry     

Niobium–aluminum oxynitride prepared by ammonolysis of oxide precursor obtained through the citrate route

Oxynitrides in the (Nb_1−xAl_x)(O,N) quaternary system were prepared by ammonolysis of oxide precursor obtained through the citrate route. The products at 1000 °C were a mixture of Nb(N,O) and NbN_0.95 at the niobium end (x = 0) and amorphous Al(O,N) at the aluminum end (x = 1). A new cubic compound (A) appeared mixed with Nb(N,O) in the compositional range 0.1 ≤ x ≤ 0.4. Its almost pure product was obtained at x = 0.5. The X-ray diffraction pattern was rock salt type (Nb_0.56Al_0.44)(O_0.38N_0.37□₀₂₅) in F_m−3m with a = 0.43481(1) nm. The product showed superconductivity with T_c = 15 K. Its crystallinity was much improved and its superconducting volume fraction increased to 32% after its thermal annealing at 1100 °C in evacuated sealed tube. A second cubic compound (B), rock salt type Nb[(O,N)_0.85□_0.15] with a = 0.434 nm, was observed mixed with amorphous Al(O,N) in the as-prepared products of the range 0.6 ≤ x ≤ 0.9.     

Comparison of enteral nutrition with combined enteral and parenteral nutrition in post-pancreaticoduodenectomy patients: a pilot study

Background  

Many clinical studies have demonstrated that early postoperative enteral nutrition (EN) improved the postroperative course. Post-pancreaticoduodenectomy (PD), patients tend to suffer from postoperative nausea, abdominal distention, and diarrhoea, causing difficulty in the introduction of EN. In this pilot study, we investigated the appropriate nutritional mode post-pancreatic surgery.     

Effect of platelet-activating factor on lipoprotein lipase and blood lipids

We investigated the effect of platelet-activating factor (PAF) and of the PAF specific antagonist CV-6209 on plasma lipid metabolism, and particularly on post-heparin plasma lipolytic activity in male Wistar rats. Lipoprotein lipase (LPL) activity was enhanced by intravenous injection of PAF before intravenous injection of heparin when the PAF dose was low (0.2 μg/kg). PAF activated hepatic triacylglycerol lipase (HTGL) activity dose-dependently. Plasma triacylglycerols (TG) significantly decreased with the activation of LPL and/or HTGL. Plasma total cholesterol (TC) and phospholipid (PL) levels decreased at a low dose of PAF (0.2 μg/kg), but increased when higher doses were used. The PAF antagonist CV-6209 partially reversed the PAF induced effects on HTGL, TC and PL. Based on a paper presented at the Third International Conference on Platelet-Activating Factor and Structurally Related Alkyl Ether Lipids, Tokyo, Japan, May 1989.     

Free primary alcohols in oils and waxes from germs,kernels and other components of nuts,seeds, fruits and cereals

The composition of free primary alcohols in oils and waxes obtained from the germ, kernel, seed coat, shell and skin (peel) of various nuts, seeds, fruits and cereals and from the chrysalis of silkworm was examined. These alcohols are usually present in small amounts, along with large quantities of hydrocarbons, esters and glycerides in oils and waxes. Thus, it is necessary to remove hydrocarbons, esters and glycerides to analyze the alcohols. We found that preparative reverse-phase thin-layer chromatography (TLC) was the best way to isolate alcohols from oils and waxes. Gas liquid chromatography (GLC) then detected hexacosanol, octacosanol and triacontanol in the oils and waxes. Octacosanol usually was the predominant alcohol. Relationships between the organs from nuts, seeds, fruits and cereals and the contents of octacosanol are suggested. For example, degermed kernels contained two times more octacosanol than the germ, and the skin coat and shell contained one-half and one-fortieth the octacosanol of the germ, respectively.     

Formation of dityrosine and other fluorescent amino acids by reaction of amino acids with lipid hydroperoxides

Formation of fluorescence by the reaction of various amino acids with lipid hydroperoxides,i.e., linoleic acid 13-monohydroperoxide, methyl linoleate 13-monohydroperoxide and phosphatidylcholine hydroperoxide, in the presence of methemoglobin was investigated. Two types of fluorescence were produced: fluorescent dityrosine (3,3′-dityrosine) from tyrosine, and unidentified fluorophores with α- and ε-amino groups of various amino acids. While the former was stable after treatment with borohydride, the latter fluorophores were readily destroyed. The rate of dityrosine formation was rapid, and the yield of dityrosine was dependent on the concentrations of tyrosine and the lipid hydroperoxides. Butylated hydroxytoluene and tocopherol inhibited the formation of dityrosine, but did not affect the formation of fluorophores on the amino groups. Dityrosine appears to be formed by radical reaction of the lipid hydroperoxides, while the other fluorophores seem to be created by nonradical mechanisms.