Novel method of preparing Ag–Hg alloy on polyacrylamide films and their structure

A novel method is proposed of preparing thin Ag–Hg alloy on PAAm film surface at room temperature: The film of interest is formed by holding PAAm aqueous solution with AgNO₃ in Hg-saturated atmosphere. Two kinds of films, one of which is a conductor and the other an insulator, can be selectively formed with pH-controlled PAAm solution by ammonia. The conducting surface is assigned to the α phase of Ag–Hg alloy by means of X-ray analysis. Potentiometric titration and IR spectral studies suggest the existence of PAAm–Ag⁺ complexes. On the basis of their structure and the oxidation and reduction potential of Ag⁺ and Hg²⁺, the mechanism of film formation is also discussed.     

Temperature Dependence of KIC for High-Pressure Hot-Pressed Si3N4 Without Additives

Temperature dependence of K_IC values for Si₃N₄ bodies sintered at high pressures without additives was studied from room temperature to 1400°C. Little change in K_K was found in this range.     

Diffusion/adsorption model of cellulose dyeing. II. Ordinary cellulose–direct dye system

The diffusion and adsorption of C.I. Direct Yellow 12 and Blue 15 in water-swollen ordinary cellophane sheets were examined at various ionic strengths. The concentration dependence of apparent diffusion coefficients, D_c, for these dyes was obtained from the diffusion profiles in the substrate, which were measured by the use of the cylindrical film roll method. The decrease of apparent porosity with an increase in the amounts of adsorption was observed. To explain the diffusion/adsorption behaviors of these systems, a variable porosity model was proposed and was applied to analyze the concentration dependence of D_c's. The diffusion/adsorption behaviors of these dyes could be quantitatively described by this model at relatively low ionic strengths. At higher ionic strengths and/or lower values of C, i.e., at the large values of C_im/C_m, where the C's are the concentrations of immobilized (suffix im) and mobile (suffix m) species, it needed to introduce the concept of dynamic equilibria which occurred simultaneously with diffusion but deviated from the true equiliblia measured by the adsorption experiments.     

Free primary alcohols in oils and waxes from germs,kernels and other components of nuts,seeds, fruits and cereals

The composition of free primary alcohols in oils and waxes obtained from the germ, kernel, seed coat, shell and skin (peel) of various nuts, seeds, fruits and cereals and from the chrysalis of silkworm was examined. These alcohols are usually present in small amounts, along with large quantities of hydrocarbons, esters and glycerides in oils and waxes. Thus, it is necessary to remove hydrocarbons, esters and glycerides to analyze the alcohols. We found that preparative reverse-phase thin-layer chromatography (TLC) was the best way to isolate alcohols from oils and waxes. Gas liquid chromatography (GLC) then detected hexacosanol, octacosanol and triacontanol in the oils and waxes. Octacosanol usually was the predominant alcohol. Relationships between the organs from nuts, seeds, fruits and cereals and the contents of octacosanol are suggested. For example, degermed kernels contained two times more octacosanol than the germ, and the skin coat and shell contained one-half and one-fortieth the octacosanol of the germ, respectively.     

Glass transition behavior of emulsion-polymerized polymer films containing a surface-active agent

The glass transition behavior of emulsion-polymerized poly(methyl methacrylate) and polystyrene films containing sodium laurylsulfate as emulsifier was studied by measurements of dynamic mechanical properties and thermal depolarization current. The film specimens of the emulsion-polymerized polymers were prepared by casting from their benzene solutions. The glass transition temperatures of the emulsion-polymerized films are higher than those of the bulk-polymerized films. The higher glass transition temperature of the emulsion-polymerized films is attributed to the colloidal properties of sodium laurylsulfate in the process of the film formation. The restriction of the molecular chains in the emulsion-polymerized films is attributed to the interaction between the hydrophobic groups of sodium laurylsulfate and the polymer molecules.     

Hydrophobic effects on protein/nucleic acid interaction: enhancement of substrate binding by mutating tyrosine 45 to tryptophan in ribonuclease Tl

Hydrophobic effects on binding of ribonuclease Tl to guaninebases of several ribonucleotides have been proved by mutatinga hydrophobic residue at the recognition site and by measuringthe effect on binding. Mutation of a hydrophobic surface residueto a more hydrophobic residue (Tyr45 – Trp) enhances thebinding to ribonucleotides, including mononucleotide inhibitorand product, and a synthetic substrate-analog trinudeotide aswell as the binding to dinucleotide substrates and RNA. Enhancementson binding to non-substrate ribonucleotides by the mutationhave been observed with free energy changes ranging from –2.2 to – 3 .9 kJ/mol. These changes are in good agreementwith that of substrate binding, –2.3 kJ/mol, which iscalculated from Michaelis constants obtained from kinetic studies.It is shown, by comparing the observed and calculated changesin binding free energy with differences in the observed transferfree energy changes of the amino acid side chains from organicsolvents to water, that the enhancement observed on guaninebinding comes from the difference in the hydrophobic effectsof the side chains of tyrosine and tryptophan. Furthermore,a linear relationship between nucleolytic activities and hydrophobicityof the residues (Ala, Phe, Tyr, Trp) at position 45 is observed.The mutation could not change substantially the base specificityof RNase Tl, which exhibits a prime requirement for guaninebases of substrates.     

Hydrothermal Formation of Hydroxyapatite Layers on the Surface of Type-A Zeolite

Type-A zeolite evenly covered with hydroxyapatite thin layers was prepared using hydrothermal treatment at 120°C for 8 h under autogenous pressure. The hydroxyapatite needlelike nanocrystals, 100–200 nm in diameter and 30 nm in thickness, were grown under the reaction between discharged Ca²⁺ ions from type-A zeolite and PO₄³⁻ ions in (NH₄)₃PO₄ solution. The preferential orientations of the c -axis of hydroxyapatite crystals perpendicular to a zeolite surface were observed using transmission electron microscopy. The crystal structure of type-A zeolite was not destroyed under the reaction, but the surface morphology was changed only with complete covering of scaly hydroxyapatite particles.     

Plasma developable photoresist containing electronic excitation energy quenching system

A dry developable negative working resist composition comprised of poly(methyl isopropenyl ketone) (PMIPK) and 4-methyl-2,6-di(4′-azido-benzylidene) cyclohexanone-1 was examined. The main photochemical product formed in the resist pattern was found to be a secondary amine which crosslinks PMIPK. Post-annealing forms a hydrogen-bonded product which shows a powerful electronic excitation energy quenching effect. The quencher is more powerful than the aromatic compound arising from the azide by post-annealing only. The residual resist thickness of the negative pattern is about 80 percent of the initial thickness of the coating in spite of all the azide compound remaining in the resist coating. The obtained dry developed resist pattern has a high dry etch resistance. Etchings of Si and SiO₂ were performed by plasma and reactive ion etching, respectively.     

Preparation of highly crystalline nanofibers on Fe and Fe-Ni catalysts with a variety of graphene plane alignments

The present study confirmed that highly crystalline nanofibers with controlled structure may be prepared over Fe and Fe-Ni alloy catalysts. The degree of graphitization of various carbon nanofibers (CNFs) was analyzed by using C(0 0 2) peaks from the XRD profiles. The C(0 0 2) peaks of CNFs over Fe catalyst shifted to higher angle and became narrower as the preparation temperature increased from 560 to 620 °C. Tubular CNFs prepared at temperature higher than 630 °C showed lower 2θ angles compared to those of platelet fibers. CNFs prepared over Fe-Ni catalysts tended to resemble those prepared over Fe catalysts. The degree of graphitization of platelet CNFs resembled natural graphite, while d_0 0 2 of the tubular CNFs showed values below the 3.39 Å reported as a theoretical minimum for a cylindrical alignment. Lc_0 0 2 of platelet and tubular CNFs increased by heat treatment at 2000 and 2800 °C though d_0 0 2 changed little. A transverse section of platelet and tubular CNFs had a hexagonal shape, not a round shape. The hexagonal column allows AB stacking of hexagonal planes that can give perfect hexagonal alignment.     

Structural characterization of 1,2-polybutadiene by 13C-n.m.r. spectroscopy: 2. Sequence distribution of 1,2-unit in hydrogenated polybutadienes

The configurational sequences of 1,2-unit in a series of hydrogenated syndiotactic 1,2-polybutadienes were determined in relation to the sequence distribution of 1,2- and 1,4-units on the basis of the ¹³C-n.m.r. signal assignment of the methyl carbons. The observed triad distributions of 1,2- and 1,4-units and configurational distributions of the 1,2-unit are in good agreement with the calculated distributions from transition probabilities. The number average sequence lengths of the 1,2-unit and the 1,2-unit in the racemic addition are 5.7 to 8.0 and 4.1 to 5.4, respectively. From the extrapolation of the plot of the number average sequence length against the crystallinity of the starting 1,2-polybutadienes, the minimum sequence length for crystallization is estimated to be 3.7 for the 1,2-unit in the racemic addition.