Pulsed NMR study in nuclear ordered solid3He

The nuclear spin dynamics in nuclear spin ordered solid³He in low magnetic fields on the melting curve has been studied by pulsed NMR down to 0.6 mK. The free induction decay signals (FID) were measured in single crystals of solid³He at three operating frequencies of 920, 1380, and 1840 kHz. The FIDs were nonexponential and dependent on the rf pulse strength _p H ₁ t _w , where is the gyromagnetic ratio,H ₁ is the rf field strength, andt _w is the pulse width. At small _p they decayed almost linearly in time with a small exponential tail at the end. When _p was further increased they became shorter and neither exponential nor linear in time. At large _p they decayed very rapidly and sometimes could not be observed at all because of the dead time of the NMR detection system. Such behavior of the FID was observed in many different single crystals in the given temperature range at 920 kHz. Tsubota and Tsuneto have shown by solving the nonlinear equations of motion numerically that the motion of the nuclear spin becomes chaotic when the tipping angle exceeds a critical value. Comparing their result with our experimental results, we concluded that some of the results of the rapid decay of the FID at large _p might be attributed to the onset of the chaotic motion. At 1840 kHz it is expected that the nonlinear effects in the equations of motion become less effective than that at 920 kHz. In fact, at this operating frequency the FIDs even at large _p and the tipping angle-dependent frequency shift could be observed. These frequency shifts were in rather good agreement with Namaizawa's theory provided an effective tipping angle was taken into account.     

Shock consolidation of diamond powders

Fine and coarse diamond powders were shock-compacted at peak pressures of 77, 90, and 108 GPa. The densification and consolidation mechanisms of diamond powders under shock compression were investigated. The densification behaviour of the diamond powders depended strongly on the particle size of the starting materials. Fine diamond powders were densified primarily by plastic deformation, while coarse diamond powders were densified mainly by particle fracture. The relative densities of the compacted diamond samples increased with an increase in the initial particle size of the diamond and with shock pressure. The consolidation mechanism of the diamond powders under shock compression was closely related to the densification mechanism, and depended on the initial particle size of the diamond. At a shock pressure of 90 GPa, particle sizes of 2 to 4 m grade and 10 to 20 m grade were desirable as the starting material in order to produce well-bonded diamond compacts. Diamond compacts having microhardness values over 80 GPa were obtained from 2 to 4 m grade and 10 to 20 m grade diamond powders at a shock pressure of 90 G Pa, and their relative densities were 88.5% and 91.0%, respectively.     

Molecular Mechanisms and Tumor Biological Aspects of 5-Fluorouracil Resistance in HCT116 Human Colorectal Cancer Cells

5-Fluorouracil (5-FU) is a cornerstone drug used in the treatment of colorectal cancer (CRC). However, the development of resistance to 5-FU and its analogs remain an unsolved problem in CRC treatment. In this study, we investigated the molecular mechanisms and tumor biological aspects of 5-FU resistance in CRC HCT116 cells. We established an acquired 5-FU-resistant cell line, HCT116R^F10. HCT116R^F10 cells were cross-resistant to the 5-FU analog, fluorodeoxyuridine. In contrast, HCT116R^F10 cells were collaterally sensitive to SN-38 and CDDP compared with the parental HCT16 cells. Whole-exome sequencing revealed that a cluster of genes associated with the 5-FU metabolic pathway were not significantly mutated in HCT116 or HCT116R^F10 cells. Interestingly, HCT116R^F10 cells were regulated by the function of thymidylate synthase (TS), a 5-FU active metabolite 5-fluorodeoxyuridine monophosphate (FdUMP) inhibiting enzyme. Half of the TS was in an active form, whereas the other half was in an inactive form. This finding indicates that 5-FU-resistant cells exhibited increased TS expression, and the TS enzyme is used to trap FdUMP, resulting in resistance to 5-FU and its analogs.     

Autonomous Visual Measurement for Accurate Setting of Workpieces in Robotic Cells

This paper introduces a new method of adapting the virtual world of an offline programming model to an actual robotic cell by attaching a CCD camera to the robot. This method requires no specific camera attachment location or optical camera calibration. Furthermore, there is no operational requirement for setting robotic camera location. Robot motion is autonomously generated to identify the camera view line. The view line is adjusted to pass through the designated target point, utilizing visual feedback motion control. This method calibrates reference points between the virtual world of an offline model to an actual robotic cell.     

Links between Immune Cells from the Periphery and the Brain in the Pathogenesis of Epilepsy: A Narrative Review

Accumulating evidence has demonstrated that the pathogenesis of epilepsy is linked to neuroinflammation and cerebrovascular dysfunction. Peripheral immune cell invasion into the brain, along with these responses, is implicitly involved in epilepsy. This review explored the current literature on the association between the peripheral and central nervous systems in the pathogenesis of epilepsy, and highlights novel research directions for therapeutic interventions targeting these reactions. Previous experimental and human studies have demonstrated the activation of the innate and adaptive immune responses in the brain. The time required for monocytes (responsible for innate immunity) and T cells (involved in acquired immunity) to invade the central nervous system after a seizure varies. Moreover, the time between the leakage associated with blood–brain barrier (BBB) failure and the infiltration of these cells varies. This suggests that cell infiltration is not merely a secondary disruptive event associated with BBB failure, but also a non-disruptive event facilitated by various mediators produced by the neurovascular unit consisting of neurons, perivascular astrocytes, microglia, pericytes, and endothelial cells. Moreover, genetic manipulation has enabled the differentiation between peripheral monocytes and resident microglia, which was previously considered difficult. Thus, the evidence suggests that peripheral monocytes may contribute to the pathogenesis of seizures.     

Synthesis of terpene alcohols from isoprene oligomers

Various terpene alcohols were prepared from isoprene oligomers via two steps: epoxidation with peracetic acid and isomerisation with aluminium triisopropoxide. For example, 2-methylene-6-methyl-7-octene-1-o1 was prepared from 2,6-dimethyl-1,7-octadiene. From 2,6-dimethyl-2,7-octadiene, 3,3,6-trimethyl-1,5-heptadiene, 2,7-dimethyl-2,6-octadiene, 2,6-dimethyl-1,3,6-octatriene, 1-methyl-4-isopropenyl-1-cyclohexene, and 1,5-dimethyl-1,5-cyclooctadiene, the corresponding alcohols were obtained, respectively.     

Modeling adsorption and order formation by colloidal particles on a solid surface: A Brownian dynamics study

A three-dimensional simulation model for colloidal dispersion system with an adsorptive surface under a specified bulk concentration was developed basing on the Brownian dynamics technique, and the adsorption process of electrostatically stabilized colloidal particles with radius of 50 nm onto a planar surface with counter charge was simulated. The particle-particle and particle-surface interactions were modeled on the DLVO theory. The adsorbed particles are found to form hexagonally ordered array, only if the surface coverage is above a certain threshold, which varies depending on the ionic strength or the interaction potentials. Through the analysis of the ordered structure, we found that the determinant factor for the order formation is “one-directional average force” acting between adsorbed particles, which exhibits a common value regardless of the ionic strength. Also, looking at the last process for establishing the order, we developed a model that can predict the potential barrier for the order formation. Further, the order formation was proven to be a stochastic phenomenon, and a model to describe the probability against time was developed and its quantitative validity was demonstrated.     

Use of LINbO3 for Design of Device-type Catalysts with Activity Controllable Functions

A poled ferroelectric LiNbO₃ single crystal with high spontaneous polarization was employed as a catalyst support, and the static and dynamic effects of the polar substrate surfaces on the adsorptive and catalytic properties of thin film catalysts deposited were shown. For the static effect, it was demonstrated that the surface conductivity of copper and metal-free phthalocyanine films increased by the adsorption of NO gas, to a larger extent, when the substrate was the negative polar surface, compared to the positive one. The role of the polar substrates is explained In terms of a band bending model. For the dynamic effect, the Rayleigh surface acoustic wave generated on the LiNbO₃ substrate was shown to enhance the catalytic activity for ethanol oxidation on Cu and Ag thin film catalysts deposited on the propagation path. It is proposed that the catalyst activation is mainly due to an electric Held produced. The use of poled LiNbO₃ is suggested to be effective for the development of a device-type catalyst with activity controllable functions.     

Mechanical Properties of Alumina/Silicon Carbide Whisker Composites

The improvement of mechanical properties of Al₂O₃/SiC whisker composites has been studied with emphasis on the effects of the whisker content and of the hot-pressing temperature. Mechanical properties such as fracture toughness and fracture strength increased with increasing whisker content up to 40 wt%. In the case of the high SiC whisker content of 40 wt%, fracture toughness of the sample hot-pressed at 1900° decreased significantly, in spite of densification, compared with one hot-pressed at 1850°. Fracture toughness strongly depended on the microstructure, especially the distribution of SiC whiskers rather than the grain size of the Al₂O₃ matrix.     

Thermal behaviour of TiO2-encapsulating polymers

Comparing the thermal properties of TiO₂ encapsulating polystyrene and poly(methyl methacrylate) with those of TiO₂ dispersion polymers it was found that the encapsulating polymers have two thermal relaxation regions. The activation energy of those thermal relaxation regions was determined using the Wunderlich method and it was found that the values are similar to the activation energy for the dynamic dispersion. It is suggested that the low-temperature thermal relaxation is caused by the local change of conformation of molecular chains, while the high-temperature thermal relaxation is similar to that of the normal glass transition temperature including the interaction with TiO₂. In addition, the thermal behaviour near the degradation point in different atmospheres indicates that the encapsulating polymer has a specific structure for adsorbing a large amount of oxygen.