Denitrification and neutralization treatment by direct feeding of an acidic wastewater containing copper ion and high-strength nitrate to a bio-electrochemical reactor process.

The feasibility of the direct denitrification treatment of copper metal pickling wastewater by using a bio-electrochemical reactor process was investigated experimentally. Carbon electrodes were installed in the reactor as the anode and cathode and denitrifying microorganisms were fixed on the surface of the cathode. The reactor was continuously operated by applying an electric current and feeding acetate. In this reactor, copper ion removal and denitrification proceeded simultaneously and the pH value of the treated water was increased almost to neutral. The electric current that passed through the cathode contributed to the removal of the copper ion and the generation of hydrogen gas. The generated hydrogen gas as well as the added acetate was effectively utilized for denitrification. A theoretical evaluation of pH in the effluent suggested that the pH increase was mainly caused by the generation of hydroxyl ion during denitrification. In addition, the inorganic carbon species generated during denitrification with acetate and by the electrochemical oxidation of anodic carbon acted as a buffer to minimize a further increase of pH at higher nitrate removal efficiencies. These results demonstrated that copper ion removal, denitrification and neutralization could be achieved simultaneously by using a single bioelectrochemical reactor.     

Adsorption properties of amphiphilic polyoxyalkylenated dimethylpolysiloxane derivatives on keratin

Adsorption properties of two types of dimethylpolysiloxane backbone derivatives, perfluoroalkyl polyoxyethylenated dimethylpolysiloxane (FPD) and polyoxyethylenated dimethylpolysiloxane (PD), onto keratin surfaces were investigated. Both polymers are amphiphilic, since they possess hydrophilic polyoxyethylene groups. FPD contains a perfluoroalkyl group that provides both water-and oil-repellent properties, whereas PD lacks these groups. Adsorption properties of these polymers onto keratin surfaces are considered a good index to evaluate these compounds as nonionics used in hair-coating agents, since keratin is a major component of hair. FPD was more likely to be adsorbed and less likely to be eliminated from the keratin surface than PD. Once FPD had been adsorbed onto the keratin surface, it was very slowly washed from the surface when it was immersed in stationary water, whereas PD polymers were quickly washed from the keratin surface. Even in running water, rapid elimination of FPD was not observed. The strong resistance to loss of FPD after washing with a large quantity of water may be due to the water-repellent nature of the perfluoroalkyl groups. As a comparison, FPD adsorption onto a glass surface was also investigated. The affinity to the glass surface was found to be less than to the keratin surface.     

Preparation of Silicon Carbide and Aluminum Silicon Carbide from a Montmorillonite–Polyacrylonitrile Intercalation Compound by Carbothermal Reduction

Both silicon carbide and aluminum silicon carbide have simultaneously been obtained directly from naturally occurring aluminosilicate by carbothermal reduction for the first time. A precursor of a montmorillonite–polyacrylonitrile (PAN) intercalation compound was heated at 1700°C in Ar. For comparison, montmorillonite–carbon mixtures were similarly heated. α-SiC, β-SiC, and Al₄Si₂C₅ formed from the montmorillonite–PAN intercalation compound. Mainly α-Al₄SiC₄ was obtained with ternary carbides from the montmorillonite–carbon mixtures in addition to a large amount of β-SiC. Hence, aluminum silicon carbide formation was affected by the mixing condition of the starting materials.     

Recovery of population inversion in an erbium-doped fiber amplifier observed by temporally resolving amplified spontaneous emissions

We report on the recovery of population inversion in a CW-pumped erbium-doped fiber amplifier. Spontaneous emissions after the input of signal pulses were temporally resolved. The recovery time for population inversion was estimated to be a few hundred microseconds. The pump power and signal width dependences of the recovery were measured. We discuss the dependences by applying an analytical formula derived for the temporal evolution of population inversion.     

Purification, characterization, and sequence determination of phospholipase D secreted by Streptoverticillium cinnamoneum

Phospholipase D (PLD), secreted into the culture medium of an actinomycete, Streptoverticillium cinnamoneum, has been purified to homogeneity and characterized. The Stv. cinnamoneum PLD efficiently catalyzes both the hydrolysis and transphosphatidylation of various phospholipids, including phosphatidylethanolamine (PE), phosphatidylcholine (PC), and phosphatidylserine (PS). However, the substrate specificity differs between the two reactions; PE serves as the most preferred substrate for the hydrolysis, but PC and PS are better substrates than PE for the transphosphatidylation. In addition, the transphosphatidylation but not the hydrolysis of PE and PC is markedly activated on the addition of metal ions, especially Al3+. Nucleotide and amino acid sequence determination of the Stv. cinnamoneum PLD revealed the presence of common structural motifs identified in all PLD sequences from various species.     

An edible oil deodorizer with a direct-fired heater

Engineers have long believed a direct-fired heater (DFH) for deodorization is always in danger of over-heating. Commercial tests done in recent years have proved this danger can be avoided by proper furnace design. At least ten commercial deodorizers with this system are now used in Asia. A new deodorizer with a DFH was designed and built in 1986 in Taiwan. It features a single-shell design and steam-stripping of deep oil layers. It has been operated successfully for several years. The deodorized oil was compared with oil produced by conventional deodorizers. The new deodorizer with a DFH revealed several advantages.     

Selectively dry-etched n+-GaAs/N-InAlAs/InGaAs HEMTs forLSI

High-speed n-InAlAs/InGaAs HEMT large-scale integrated circuits must have uniform device parameters. A selectively dry-etched n⁺ -GaAs/N-InAlAs/InGaAs HEMT which has a very uniform threshold voltage is discussed. Despite the high dislocation density at the n⁺-GaAs layer, its performance is excellent. For a gate length of 0.92 μm, the maximum transconductance of the HEMT is 390 mS/mm. The measured current-gain cutoff frequency is 23.7 GHz, and the maximum frequency of oscillation is 75.0 GHz. The standard deviation of the threshold voltage across a 2-in wafer is as low as 13 mV     

Multimedia processors

This paper describes large-scale-integration programmable processors designed for multimedia processing such as real-time compression and decompression of audio and video as well as the generation of computer graphics. As the target of these processors is to handle audio and video in real time, the processing capability must be increased tenfold compared to that of conventional microprocessors, which were designed to handle mainly texts, figures, tables, and photographs. To clarify the advantages of a high-speed multimedia processing capability, we define these chips as multimedia processors. General-purpose microprocessors for workstations and personal computers (PCs) use special built-in hardware for multimedia processing, so the multimedia processors described include these modified general-purpose microprocessors. After reviewing the history of programmable processors, we classify multimedia processors into five categories depending on their basic architecture. The categories are reduced instruction set computer (RISC) microprocessors for workstations, complex instruction set computer microprocessors for PCs, embedded RISCs, low-power digital signal processors (DSPs), which are mainly used for mobile communications devices, and media processors that support PCs for multimedia applications. These five classes are then grouped into two: microprocessors with a multimedia instruction set and highly parallel DSPs. An architectural comparison between these two groups on the basis of Moving Picture Experts Group decoding applications is made, and the advantages and disadvantages of each class are clarified. Future processors, including “system on a chip,” and their applications are also discussed