Development of soft x-ray time-resolved photoemission spectroscopy system with a two-dimensional angle-resolved time-of-flight analyzer at SPring-8 BL07LSU

We have developed a soft x-ray time-resolved photoemission spectroscopy system using synchrotron radiation (SR) at SPring-8 BL07LSU and an ultrashort pulse laser system. Two-dimensional angle-resolved measurements were performed with a time-of-flight-type analyzer. The photoemission spectroscopy system is synchronized to light pulses of SR and laser using a time control unit. The performance of the instrument is demonstrated by mapping the band structure of a Si(111) crystal over the surface Brillouin zones and observing relaxation of the surface photo-voltage effect using the pump (laser) and probe (SR) method.     

Development of a wavelength-stabilized distributed bragg reflector laser diode to the Cs-D2 line for field use in accurate geophysical measurements

We have developed a wavelength-stabilized laser diode (LD) for geophysical measurement devices, which benefit from the uniformity of laser light. Regarding this purpose, a system that has such characteristics as low power consumption, sturdiness against mechanical disturbances, and a long life with long-term frequency stability is especially required. Therefore, we adopt as the light source a distributed Bragg reflector (DBR) LD because it has various advantages concerning such properties. This paper describes the durable and compact wavelength-stabilized laser system. Since our DBR-LD oscillates at 852 nm, we selected the Cs-D2 line (6 2S1/2-6 2P3/2 transition) as a frequency reference to obtain a long-term stability in wavelength. Stabilization is performed by a feedback system using a modulation transfer (MT) method, which is a kind of Doppler-free saturated absorption spectroscopy, to acquire a saturated absorption signal with a high signal-to-noise ratio. Using this system, we could continuously lock the laser frequency to the hyperfine component of the Cs-D2 line for more than one week. By an Allan standard deviation measurement, the uncertainty of the stabilized laser frequency was found to be better than 1 x 10(-10) (<40 kHz) in a Gatetime region longer than 100 s.     

Cellulose–chitin hybrids: synthesis of branched amino polysaccharides by regioselective introduction of (N-acetyl-)d-glucosamine branches into cellulose

Cellulose–chitin hybrid-type branched polysaccharides, β-1,4-d-glucans having amino sugar branches at the C-6 position, have been synthesized through a series of site-specific modification reactions. Cellulose was first transformed to two kinds of acceptors having a reactive group only at C-6. Glycosylation reactions of these acceptors with an oxazoline donor derived from d-glucosamine resulted in the introduction of amino sugar branches into cellulose. An acceptor carrying the O-trimethylsilyl group at C-6 was particularly suitable for glycosylation in solution to form branched celluloses with various degrees of substitution up to about 0.5 per pyranose unit in a controlled manner. Deprotection of the product afforded the cellulose having N-acetyl-d-glucosamine or d-glucosamine branches depending on the reaction conditions. The deprotected nonnatural branched polysaccharides were readily soluble in neutral water as well as common organic solvents and would be promising as a new type of water-soluble amino polysaccharides.     

Vision‐based automated bridge component recognition with high‐level scene consistency

This research investigates vision‐based automated bridge component recognition, which is critical for automating visual inspection of bridges during initial response after earthquakes. Semantic segmentation algorithms with up to 45 convolutional layers are applied to recognize bridge components from images of complex scenes. One of the challenges in such scenarios is to get the recognition results consistent with high‐level scene structure using limited amount of training data. To impose the high‐level scene consistency, this research combines 10‐class scene classification and 5‐class bridge component classification. Three approaches are investigated to combine scene classification results into bridge component classification: (a) naïve configuration, (b) parallel configuration, and (c) sequential configuration of classifiers. The proposed approaches, sequential configuration in particular, are demonstrated to be effective in recognizing bridge components in complex scenes, showing less than 1% of accuracy loss from the naïve/parallel configuration for bridge images, and less than 1% false positives for the nonbridge images.     

Excess heat evolution from nanocomposite samples under exposure to hydrogen isotope gases

Anomalous heat effect by interaction of hydrogen isotope gas and metal nanocomposites supported by zirconia or by silica has been examined. Observed absorption and heat evolution at RT were not too large to be explained by some chemical processes. At elevated temperatures of 200–300 °C, most samples with binary metal nanocomposites produced excess power of 3–24 W lasting for up to several weeks. The excess power was observed not only in the D-Pd·Ni system but also in the HPd·Ni system and HCu·Ni system, while single-element nanoparticle samples produced no excess power. The Pd/Ni ratio is one of the keys to increase the excess power. The maximum phase-averaged excess heat energy exceeded 270 keV/D, and the integrated excess heat energy reached 100 MJ/mol-M or 90 MJ/mol-H. It is impossible to attribute the excess heat energy to any chemical reaction; it is possibly due to radiation-free nuclear process.     

Lattice misorientation at domain boundaries in β-Ga2O3 single-crystal substrates observed via synchrotron radiation X-ray diffraction imaging and X-ray reticulography

To evaluate the lattice misorientation at domain boundaries (DBs) in β-Ga₂O₃, we performed X-ray diffraction imaging (XRDI), X-ray reticulography (XRR), and X-ray topography (XRT) using a synchrotron radiation light source. Four reciprocal lattice vectors ( g -vectors) were applied, and the DBs showed different visibilities in the XRDI maps depending on the g -vector. By analyzing possible characteristics of the misorientation, the XRDI results suggested that the DB being investigated was associated with a misorientation on the ($\overline{10}05$) plane and contained twist and tilt components. The apparent peak change in XRDI caused by the two components was calculated. We further succeeded in separating the tilt and twist components using XRR images in conjunction with simulation. Dislocation arrays at the DBs were observed using XRT, and the average distance between the dislocations in the array was consistent with the misorientation obtained using XRDI and XRR. The distribution of DBs across a wide area was acquired by a combination of XRR images recorded on a charge-coupled device camera and X-ray films. The fringe-patterned XRR on X-ray films provided a powerful and nondestructive tool to characterize DBs distributed across a large-diameter wafer with an angular resolution on the order of several arc sec (low 10⁻⁵ rad).     

Improvement in output power of vibration generators based on piezoelectric elements by using internal capacitor cancel control rectifier

Recently, energy harvesting has attracted increasing attention. The present study focuses on vibration generators based on piezoelectric elements by proposing an internal capacitor cancel control (ICCC) rectifier to improve the output power. The proposed rectifier cancels the internal capacitor to improve the output power while retaining the maximum output power. Accordingly, this paper experimentally demonstrates the improvement in output power by using the ICCC rectifier compared to conventional circuits and the previous proposed circuit.     

Long-term thermal stability of Li4TiO4–Li2TiO3 core–shell breeding pebbles under continuous heating in H2/Ar atmosphere

The long-term thermal stability of tritium breeding materials during service is a key factor to ensure efficient tritium release. In this study, the long-term thermal stability of advanced Li₄TiO₄–Li₂TiO₃ core–shell breeding pebbles under continuous heating in 1%H₂/Ar at 900°C was investigated for the first time. The results show that this core–shell material loses 3.4% Li mass after heating for 30 days, resulting in a reduction in Li density to .415 g/cm³, which is still significantly higher than other breeding materials. The moisture in the sample bed will determine the form of Li volatilization and thus affect the rate of Li mass loss. The core–shell pebbles maintain favorable phase stability during long-term heating, and the grain sizes of the Li₂TO₃ shell and Li₄TiO₄ core after 30 days of heating are 6.5 ± 1.5 and 6.9 ± 2.5 μm, respectively. Moreover, the samples did not crack or collapse during long-term heating and still had a satisfactory crushing strength of 37.61 ± 7.13 N after 30 days of heating. Overall, the high Li density and good thermal stability during long-term heating demonstrate that the Li₄TiO₄–Li₂TiO₃ core–shell breeding pebbles are a very reliable tritium breeding material for long-term service under harsh operating conditions.