The effect of nonablative laser energy on the ultrastructure of joint capsular collagen

This study was designed to evaluate the effect of laser energy at nonablative levels on the ultrastructure of joint capsular collagen. The femoropatellar joint capsules of six mature New Zealand white rabbits were harvested immediately after death. Specimens were divided into three treatment groups (5, 10, and 15 watts) and one control group. Laser energy was applied using a holmium: YAG laser. Transmission electron microscopy showed significant ultrastructural alterations in collagenous architecture for all laser treatment groups, with increased fibril cross-sectional diameter for each of the treated groups. The fibrils began to lose their distinct edges and their periodical cross-striations at subsequently higher energy densities. A morphometric analysis showed that each subsequently higher laser energy caused a significant increase in collagen fibril diameter. Ultrastructural alteration of collagen fibril architecture caused by the thermal effect of laser energy is probably the dominant mechanism of laser-induced tissue shrinkage.     

Dis3, implicated in mitotic control, binds directly to Ran and enhances the GEF activity of RCC1

Using the two-hybrid method, we isolated a Saccharomyces cerevisiae cDNA encoding a protein homologous to Schizosaccharomyces pombe protein Dis3sp, using as bait, human GTPase Ran. The DIS3 gene is essential for viability and complements S.pombe mutant dis3-54 which is defective in mitosis. Although Dis3sc has no homology to RanBP1, it bound directly to Ran and the S.cerevisiae Ran homologue Cnr1, but not to the S.cerevisiae RCC1 homologue Srm1. Upon binding to Ran with a 1:1 molar ratio, Dis3sc enhanced a nucleotide-releasing activity of RCC1 on Ran. In the presence of Dis3sc, the K(m) of RCC1 on Ran decreased by half, while the kcat was unchanged. In vivo, Dis3sp was present as oligomers of M(r) 670-200 kDa as previously reported, and the 200 kDa oligomer of Dis3sp was found to include Spi1 and Pim1, the S.pombe homologues of Ran and RCC1, respectively. Although the biological function of the heterotrimeric oligomer consisting of Dis3, Spi1 and Pim1 is unknown, our results indicate that Dis3 is a component of the RCC1-Ran pathway.     

Macrocytic anemia with anisocytosis due to alcohol abuse and vitamin B6 deficiency

The effect of the choice of maternal age-specific prevalence curve on the model predicted Down syndrome detection rate was examined. All 19 published regression curves from 11 birth prevalence series in four meta-analyses were included. The detection rate for a five per cent false-positive rate was estimated for three combinations of markers. For free beta human chorionic gonadotropin and alpha-fetoprotein the lowest predicted detection rate was 62.3 per cent and the highest 64.1 per cent, a range of 1.8 per cent. When unconjugated oestriol was added as a third marker it was 65.6-67.3 per cent, a 1.7 per cent range, and when inhibin A was the fourth marker the detection rate was 72.0-73.4 per cent, a 1.4 per cent range. The number of series included in the regression had the biggest effect: when the authors had used a subset thought to have the highest ascertainment the predicted detection rate generally increased. The type of regression equation used and restrictions on the age range over which the regression was performed were less important factors. The effect of the choice of curve on the predicted increase in detection achieved by incorporating additional markers was relatively small: 3.1-3.3 per cent for unconjugated oestriol and a further 6.1-6.5 per cent for inhibin A. This analysis shows that the model inaccuracy caused by the maternal age curve is not small but is unlikely to be large enough to influence Down syndrome screening policy decisions.     

Development of novel method for screening microorganisms using symbiotic association between insect (Coptotermes formosanus Shiraki) and intestinal microorganisms

It is becoming increasingly difficult to isolate novel useful microorganisms from the natural environment using conventional screening methods based on pure culture techniques. A novel method for screening microorganisms in symbiotic association with insects was developed. This method involves the following two steps. In the first step, the existence of desired microorganisms that grow well by degrading difficult-to-degrade materials in the gut of insects is detected using the survivability of insects as an indicator. In the second step, the desired microorganisms are selected from the surviving insects. The second step is based on an idea that the guts of insects act as continuous-culture systems whereby microorganisms that cannot degrade diet components are washed out whereas those that can degrade diet components are retained and made to multiply in the gut. Coptotermes formosanus Shiraki was fed with an artificial diet containing phenol as a model of lignin-derived and difficult-to-degrade compound. Each C. formosanus feeding on an artificial diet containing 100 mg/l phenol had different levels of adaptation to the toxicity of phenol. About 20% of C. formosanus fed with an artificial diet containing 100 mg/l phenol died within a few days whereas others survived for more than 10 d. The structure of the intestinal microorganisms of the surviving C. formosanus fed with the 100 mg/l phenol artificial diet gradually changed and was very different from that of the bacterial communities obtained from the enrichment culture of wood-feeding C. formosanus using an artificial medium containing phenol as a sole carbon source. Furthermore, Only three species (as DGGE band) were detected from the gut of wood-feeding C. formosanus, whereas 200 times more phenol-degrading microorganisms were detected in the gut of C. formosanus feeding on a phenol artificial diet. Out of these nine species (as DGGE band) of phenol-degrading microorganisms were isolated. The screening method developed in this study can also be applied to various insects, leading to the isolation of various microorganisms that can degrade difficult-to-degrade compounds.     

Safety evaluation of rechargeable cells with lithium metal anodes and amorphous V2O5 cathodes

Rechargeable cells with lithium metal anodes have a very large theoretical energy density and are a promising cell system. However, rechargeable lithium metal cells are not yet currently commercially available. One of the biggest problems with the cells is the poor safety aspect resulting from the high chemical reactivity of lithium. We have been studying a cell system consisting of an amorphous (a-)V2O5P2O5 (95:5 in molar ratio) cathode, a lithium (Li) metal anode and an organic electrolyte in fabricating an AA-size prototype. In this paper, we report recent progress on our rechargeable lithium metal cell focusing on its safety.     

Coupled simulation of BES-CFD and performance assessment of energy recovery ventilation system for office model

Thermal comfort and indoor air quality as well as the energy efficiency have been recognized as essential parts of sustainable building assessment. This work aims to analyze the energy conservation of the heat recovery ventilator and to investigate the effect of the air supply arrangement. Three types of mixing ventilation are chosen for the analysis of coupling ANSYS/FLUENT (a computational fluid dynamics (CFD) program) with TRNSYS (a building energy simulation (BES) software). The adoption of mutual complementary boundary conditions for CFD and BES provides more accurate and complete information of indoor air distribution and thermal performance in buildings. A typical office-space situated in a middle storey is chosen for the analysis. The office-space is equipped with air-conditioners on the ceiling. A heat recovery ventilation system directly supplies fresh air to the office space. Its thermal performance and indoor air distribution predicted by the coupled method are compared under three types of ventilation system. When the supply and return openings for ventilation are arranged on the ceiling, there is no critical difference between the predictions of the coupled method and BES on the energy consumption of HVAC because PID control is adopted for the supply air temperature of the occupied zone. On the other hand, approximately 21% discrepancy for the heat recovery estimation in the maximum between the simulated results of coupled method and BES-only can be obviously found in the floor air supply ventilation case. The discrepancy emphasizes the necessity of coupling CFD with BES when vertical air temperature gradient exists. Our future target is to estimate the optimum design of heat recovery ventilation system to control CO₂ concentration by adjusting flow rate of fresh air.     

Ketones from carboxylic acids over supported magnesium oxide and related catalysts

Silica-supported alkaline earth oxides revealed excellent activity to convert acetic acid selectively into acetone in a vapor-phase fixed-bed flow system. Acetone was obtained through the cyclic formation of alkaline earth acetate followed by decomposition. Magnesium oxide should be supported on the silica surface without formation of magnesium silicate, which was inactive for the present reaction. Attempted syntheses of benzophenone and acetophenone are also described.     

Effects of hydrophilicity of crosslinker on membrane properties of poly(N-hydroxyethyl-L-glutamine) hydrogels

Summary Poly(N-hydroxyethyl-L-glutamine) (PHEG) hydrogels were prepared by aminolysis of poly( -benzyl L-glutamate) with 2-aminoethanol and hydrophobic or hydrophilic crosslinkers, and the effect of the hydrophobicity of the crosslinkers was evaluated. The swelling properties, tensile properties and enzymatic degradation behavior were studied in phosphate buffered saline (PBS). The swelling ratio and degradation rate of these hydrogels were highly dependent on the hydrophobicity of the crosslinkers, while tensile properties were dependent on the swelling ratio, but not on the hydrophobicity of the crosskinkers.     

Incorporation of Dust Particles into a Growing Film During Silicon Dioxide Deposition from a TEOS/O2 Plasma

The effects of gas flow rate on particle formation and film deposition during the preparation of silica thin film using a TEOS/O₂ plasma were investigated. Particle formation and growth are suppressed with increasing gas flow rates. The film deposition rate increases with increasing gas flow rate, reaches a maximum value, and eventually decreases again. However, the uniformity of the film tends to degrade at high gas flow rates. At a high gas flow rate, some particles trapped in the sheath near the grounded electrode pass through the sheath to reach the substrate and are then embedded in the growing film. A self-consistent sheath model combined with particle force balance based on charge fluctuation was developed to explain these experimental findings qualitatively. The model reveals that charge fluctuation is a key factor for the particle to overcome the potential barrier of the negatively charged particles to pass through the sheath, eventually reaching the substrate. The model further shows that the probability of a particle being deposited on the substrate is higher for increased gas flow rates, which correctly predicts the experimentally observed trend.     

Homogeneous Tritylation of Cellulose in A Sulfur Dioxide – Diethylamine – Dimethyl Sulfoxide Medium

The present investigation was undertaken to see if a practical method could be developed for homogeneous tritylation of cellulose in a non-aqueous solvent of cellulose. Our new procedure of tritylation of cellulose can easily be carried out under homogeneous conditions by dissolving cellulose in a sulfur dioxide(SO₂)-diethylamine (DEA)-dimethyl sulfoxide(DMSO) solvent system, one or the non-aqueous cellulose solvents, followed by addition of trityl chloride and pyridine. This new method can avoid the time consuming pretreatment for the decrystallization of cellulose which has been necessary in the traditional procedure and can lower the reaction temperature. IR spectra of the products indicated the formation of trityl cellulose. Measurements of dielectric properties of the products confirmed that trityl groups were selectively introduced at the primary hydroxyl groups in cellulose. This conclusion was also confirmed by a H-NMR study in which the tritylated products was first acetylated, detritylated and then trideuterioacetylated and H-NMR spectra were taken at each stage and examined comparatively.