Identification of a gamma-irradiated ingredient (garlic powder) in Korean barbeque sauce by thermoluminescence analysis

Thermoluminescence (TL) analysis was applied to identify gamma-irradiated garlic powder in Korean barbeque sauce before and after pasteurization (85 °C, 30 min), when blended in different ratios (1%, 3%, and 5%). The sauce sample with nonirradiated garlic powder gave a background glow curve. However, the sample blended with irradiated ingredient (1 and 10 kGy) showed typical TL glow curves at temperatures of 150 to 200 °C. The identification properties of sauce samples were more influenced by blending ratios than by irradiation doses, showing that 3% and 5% added samples produced glow curves at 150 to 250 °C. After pasteurization of the samples containing the irradiated ingredient, TL glow intensity decreased but did not change its shape or temperature range. As a result, the pasteurization of Barbeque sauces containing irradiated ingredients had reduced TL glow intensity, but the shape and temperature range of glow curve were still able to provide information required for confirming irradiation treatment. PRACTICAL APPLICATION: To monitor the irradiated food in international market, thermoluminescence (TL) analysis is considered most promising identification technique because of its sensitivity and long-term stability. In this study the applicability of TL analysis to detect an irradiated ingredient (garlic powder) added in low quantity to a food matrix (sauce) was investigated. The effect of processing (pasteurization) on TL results was also evaluated.     

Extra-Virgin Olive Oil and Cheap Vegetable Oils: Distinction and Detection of Adulteration as Determined by GC and Chemometrics

Refined oils including corn, sunflower, soybean, and palm oils as well as low-quality olive oil such as refined lampante and pomace olive oils are commonly used for extra-virgin olive oil (EVOO) adulteration. Indeed, K ₂₇₀ could be used as a parameter for the detection of EVOO fraud for each type of the studied refined oils, 10 % olive, 4 % pomace olive, 10 % palm, 5 % corn, and 2 % soybean oils. Moreover, the adulteration could also be detected by the increase of the trans fatty acid contents with 10 % pomace olive, 3 % soybean, 3 % sunflower, 2 % corn, and 10 % palm oils. Actually, stigmasta-3,5-diene content is one of the most effective means of detecting refined oils in EVOO at low levels: 2 % olive, 0.4 % pomace olive, 1 % palm, 0.2 % soybean, 0.5 % sunflower, and 0.1 % corn oils. Finally, the application of linear discriminant analysis could represent an alternative and innovative tool for faster and cheaper evaluation of EVOO adulteration.     

pH Responsive Abelmoschus esculentus Mucilage and Administration of Methotrexate: In-Vitro Antitumor and In-Vivo Toxicity Evaluation

The rapid progression in biomaterial nanotechnology apprehends the potential of non-toxic and potent polysaccharide delivery modules to overcome oral chemotherapeutic challenges. The present study is aimed to design, fabricate and characterize polysaccharide nanoparticles for methotrexate (MTX) delivery. The nanoparticles (NPs) were prepared by Abelmoschus esculentus mucilage (AEM) and chitosan (CS) by the modified coacervation method, followed by ultra-sonification. The NPs showed much better pharmaceutical properties with a spherical shape and smooth surface of 213.4–254.2 nm with PDI ranging between 0.279–0.485 size with entrapment efficiency varying from 42.08 ± 1.2 to 72.23 ± 2.0. The results revealed NPs to possess positive zeta potential and a low polydispersity index (PDI). The in-vitro drug release showed a sustained release of the drug up to 32 h with pH-dependence. Blank AEM -CS NPs showed no in-vivo toxicity for a time duration of 14 days, accompanied by high cytotoxic effects of optimized MTX loaded NPs against MCF-7 and MD-MBA231 cells by MTT assay. In conclusion, the findings advocated the therapeutic potential of AEM/CS NPs as an efficacious tool, offering a new perspective for pH-responsive routing of anticancer drugs with tumor cells as a target.     

Modified guar gum: An alternative source for printing of cotton fabric with reactive dye

The alginate thickener is the thickener frequently used for reactive printing of textile. The thickener responds with reactive pigments and thus does not lead to the fabric composition becoming stiffer. In this study, we prepared oxidised natural guar gum with hydrogen peroxide, sodium hypochlorite and sodium hydroxide. All other polysaccharides comprise reactive hydroxyl units with a stronger reactivity that must be replaced if they are to be used in reactive printing. Guar derivatives were synthesised and verified using Fourier-transform infrared (FTIR) spectroscopy. Natural thickeners, synthetic guar gum derivatives, have been employed in textile printing technique. In comparison to other synthetic thickeners, modified environmental guar gum polymer has been shown to be an ecologically friendly and low-cost thickener. Cotton fabric printed with modified guar thickening with hydrogen peroxide has even stronger colour strength than fabric printed with sodium alginate thickener, which is highly favourable. Penetration properties, colour value, colour strength, colour fastness to washing, light and rubbing was compared with alginate thickener (readily available on the market). Guar gum thickeners showed enhanced features versus sodium alginate for reactive printing. Partially replaced guar gum is an appropriate option due to the colour and physical properties.     

Synthesis and process modeling of mesoporous γ-Al2O3 granules using the biopolymer chitosan via experimental design

In this study, biopolymer chitosan is presented as a template for synthesizing and shaping the mesoporous γ-Al₂O₃ macrospheres. This porous γ-Al₂O₃ granule has a high surface area (310 m²/g), high pore volume (.6148 cm³/g), and pore diameter between 2 and 10 nm. The full factorial design based on a mathematical model was implemented to study the acid concentration, chitosan amount, ammonia concentration, and aging time affecting the responses (Brunauer–Emmett–Teller surface area and pore volume). Predicted responses were found to be in satisfactory agreement with experimental values (R² = .9580 and .9109, respectively). The adequacy of the model was examined by analyzing the residual distribution plots and Pareto graph. X-ray diffraction, scanning electron microscopy (SEM), thermogravimetric analysis, and N₂ adsorption/desorption techniques are employed to characterize the structure of the prepared γ-alumina sample.     

Ultrathin buffer layer at organic/organic interface for managing the recombination profile in organic light‐emitting diodes: Metal versus dielectric buffer

We report on the utilization of an ultrathin buffer layer at the organic/organic (O/O) interface to enhance device efficiency in organic light‐emitting diodes. Two different kinds of buffer layers are examined: metal and dielectric. It is shown that employment of an ultrathin Ag layer with a thickness of 1–2 nm enhances the device performance, while a MgF₂ dielectric buffer cannot affect the device properties considerably. In particular, the turn‐on voltage of the device with an appropriate buffer layer is reduced about 3 V, its current efficiency increases by a factor of more than three, and the power efficiency increases by a factor of more than five in comparison to the control device when a Ag buffer layer is introduced at the O/O interface. By employment of the buffer layer at the interface, an accumulation of current carriers appears within the device that redistribute the recombination profile toward the interior part of the emissive layer. Also, morphological examinations reveal that distinguishable phase segregation occurs in the blend of the hole‐transport layer. In particular, the polymer component remains at the surface and facilitates the hole transport into the successive layers. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43894.     

Corrosion behavior of 2024 aluminum alloy anodized in presence of permanganate and phosphate ions

In this article, the effects of two inorganic corrosion inhibitors, permanganate and phosphate anions, on morphology, composition, thickness, and corrosion resistance of the anodic film formed on 2024 aluminum alloy in sulfuric acid were investigated. Surface morphology of the oxide films were studied by field emission scanning electron microscopy. Electrochemical impedance spectroscopy and potentiodynamic polarization tests were conducted to assess the corrosion resistance of the coatings. These analyses showed that the presence of the mentioned inhibitors changed the coating morphology, especially in the case of phosphate ions. Corrosion results indicated that using inhibitors during the anodizing process increased the corrosion resistance of the anodized samples. The increases were approximately 81% and 97% for 0.05 M of permanganate and phosphate ions, respectively, compared with the anodized coatings in the absence of additives. An increase in the inhibitor concentration results in better corrosion resistance of the aluminum anodic layer.     

Effects of Plant Growth Hormones on Mucor indicus Growth and Chitosan and Ethanol Production

The objective of this study was to investigate the effects of indole-3-acetic acid (IAA) and kinetin (KIN) on Mucor indicus growth, cell wall composition, and ethanol production. A semi-synthetic medium, supplemented with 0–5 mg/L hormones, was used for the cultivations (at 32 °C for 48 h). By addition of 1 mg/L of each hormone, the biomass and ethanol yields were increased and decreased, respectively. At higher levels, however, an inverse trend was observed. The glucosamine fraction of the cell wall, as a representative for chitosan, followed similar but sharper changes, compared to the biomass. The highest level was 221% higher than that obtained without hormones. The sum of glucosamine and N-acetyl glucosamine (chitin and chitosan) was noticeably enhanced in the presence of the hormones. Increase of chitosan was accompanied by a decrease in the phosphate content, with the lowest phosphate (0.01 g/g cell wall) being obtained when the chitosan was at the maximum (0.45 g/g cell wall). In conclusion, IAA and KIN significantly enhanced the M. indicus growth and chitosan production, while at the same time decreasing the ethanol yield to some extent. This study shows that plant growth hormones have a high potential for the improvement of fungal chitosan production by M. indicus.     

Rapid synthesis of thermally stable hydroxyapaptite

We have optimized the wet precipitation synthesis of hydroxyapaptite to obtain thermally stable powder in the short time span of 3 min. Exposure of the reaction mixture to 1000 W microwave for 3 min furnished hydroxyapatite, which was thermally stable at temperatures up to 1200 °C. Powders were analyzed for phase purity using X-ray crystallography; chemical composition was studied using Fourier transform infrared spectroscopy while particle morphology was analyzed using scanning electron microscopy.