Impact of interconnection photovoltaic/wind system with utility on their reliability using a fuzzy scheme

Reliability analysis has been considered as an important step in any system design process. A reliable electrical power system means a system which has sufficient power to feed the load demand during a certain period or, in other words, has small Loss of Load Probability (LOLP). LOLP is defined as an expected fraction of load not met by its power needs from electrical power system during its lifetime. Photovoltaic (PV)/Wind Energy System (WES) Hybrid Electric Power System (PV/WES HEPS) differs considerably from the Utility Grid (UG) in its performance and operating characteristics. With the interconnection of PV/WES as a HEPS into the UG, the fluctuating nature of the energy produced by these systems has a different effect on the overall system reliability than that of the fluctuating nature of energy produced by UG. Therefore, this paper presents a complete study, from reliability point of view, to determine the impact of interconnecting PV/WES HEPS into UG. Four different configurations of PV/WES/UG have been investigated and a comparative study between these four different configurations has been carried out. The overall system is divided into three subsystems, containing the UG, PV and WES. The generation capacity outage table has been built for each configuration of these subsystems. These capacity outage tables of UG, PV/UG, WES/UG and PV/WES/UG are calculated and updated to incorporate their fluctuating energy production. This paper also presents a fuzzy logic technique to calculate and assess the reliability index for each HEPS configuration under study.     

Concentrator silicon solar cells from silicon industry rejects

Two types of silicon (Si) substrates (40 n-type with uniform base doping and 40 n/n⁺ epitaxial wafers) from the silicon industry rejects were chosen as the starting material for low-cost concentrator solar cells. They were divided into four groups, each consisting of 20 substrates: 10 are n/n⁺ and 10 are n substrates, and the solar cells were prepared for different diffusion times (45, 60, 75 and 90 min). The fabricated solar cells on n/n⁺ substrates (prepared with a diffusion time of 75 min) showed better parameters. In order to improve their performances, particularly the fill factor, 20 new solar cells on n/n⁺ substrates were fabricated using the same procedure (the diffusion time was 75 min)—but with four new front contact patterns. Investigation of current–voltage (I–V) characteristics under AM 1.5 showed that the parameters of these 20 new solar cells have improved in comparison to previous solar cells' parameters, and were as follows: open-circuit voltage (V_OC=0.57 V); short circuit current (I_SC=910 mA), and efficiency (η=9.1%). Their fill factor has increased about 33%. The I–V characteristics of these solar cells were also investigated under different concentration ratios (X), and they exhibited the following parameters (under X=100 suns): V_OC=0.62 V and I_SC=36 A.     

4D Printing of Shape Memory Materials for Textiles: Mechanism,Mathematical Modeling,and Challenges

Shape memory materials (SMMs) in 3D printing (3DP) technology garnered much attention due to their ability to respond to external stimuli, which direct this technology toward an emerging area of research, “4D printing (4DP) technology.” In contrast to classical 3D printed objects, the fourth dimension, time, allows printed objects to undergo significant changes in shape, size, or color when subjected to external stimuli. Highly precise and calibrated 4D materials, which can perform together to achieve robust 4D objects, are in great demand in various fields such as military applications, space suits, robotic systems, apparel, healthcare, sports, etc. This review, for the first time, to the best of the authors’ knowledge, focuses on recent advances in SMMs (e.g., polymers, metals, etc.) based wearable smart textiles and fashion goods. This review integrates the basic overview of 3DP technology, fabrication methods, the transition of 3DP to 4DP, the chemistry behind the fundamental working principles of 4D printed objects, materials selection for smart textiles and fashion goods. The central part summarizes the effect of major external stimuli on 4D textile materials followed by the major applications. Lastly, prospects and challenges are discussed, so that future researchers can continue the progress of this technology.     

Design of CMOS VHF/RF Biquadratic Filters

In this paper, a class of CMOS biquadratic filter suitable to work at VHF/RF frequency range is presented. The proposed circuit has a simple structure which is analyzed and designed according to a universal G _m-C biquad filter. Simulation and experimental results show that these filters can work in GHz range and have wide tuning range.     

A novel silicon Schottky diode for NLTL applications

The design and simulation of a novel silicon Schottky diode for nonlinear transmission line (NLTL) applications is discussed in this paper. The Schottky diode was fabricated on a novel silicon-on-silicide-on-insulator (SSOI) substrate for minimized series resistance. Ion implantation technology was used as a low-cost alternative to molecular beam epitaxy to approximate the delta (/spl delta/) doping profile, which results in strong nonlinear CV characteristics. The equivalent circuit model of the Schottky diode under reverse bias conditions was extracted from the S-parameter measurement performed on the diode. The measured CV characteristics show strong nonlinearity, the junction capacitance varies from 182 to 47.5 fF as the reverse bias voltage is varied from 0 to -5 V. A parasitic inductance of 40 pH was measured for the silicon Schottky diode, which is much smaller than a comparable sized GaAs Schottky diode. This small inductance is an advantage for the silicon Schottky diode offering improvement in the silicon NLTL performance.     

Biochemical composition and storage of Jamaican yams (Dioscorea sp)

Dioscorea yam tubers of 11 cultivars from five common species grown in Jamaica were analysed for the following: protein content, total phenolics, vitamin C, total lipids, fatty acid composition and activity of the polyphenol oxidase enzyme. The results show that the yams grown in Jamaica are of good nutritional value with considerable amounts of protein, vitamin C, low lipids with only one cultivar ‘renta yam’ (D alata) possessing high levels of phenolic compounds. The fatty acids present in the total lipid extracts show that yam tubers generally possess high levels of saturated fatty acids mainly palmitic acid. However, the species D alata (cv white yam) and the species D trifida (cv yampie) have high levels of the unsaturated fatty acid, linolenic. All the polyphenol oxidases from the 11 cultivars show activities towards the diphenol substrates, catechol and DL-DOPA (DL-3,4-dihydroxyphenylalanine). However, no oxidation was observed with L-tyrosine, a monophenol substrate. All cultivars studied were found to have different lengths of dormancy which varied with storage conditions. When the harvested tubers were washed, sunned and stored at 20?C in a dark cupboard, it was possible to extend their lengths of dormancy by a further 11 weeks.     

On-Line Error Detection for Bit-Serial Multipliers in GF(2m)

In this paper error detection is applied to four finite field bit-serial multipliers. It is shown that by using parity prediction, on-line error detection can be incorporated into these multipliers with very low hardware overheads. These hardware overheads are generally independent of m and comprise only a handful of gates, so for large values of m these overheads are particularly low. The fault coverage of the presented structures has been investigated by simulation experiment and shown to range between 90% and 94.3%.     

Physical and geochemical properties of crude oils in relation to their source rocks,Alif field,Marib Sub-basin,Yemen

Physical and geochemical properties were performed on three crude oils from Alif-01 well in the Marib sub-basin. The analyzed samples comprise medium specific gravity (37^° API), reflecting mature source rocks. The thermal maturity of the analyzed oils is also indicated from the high content of aliphatic hydrocarbons (HC). The compositions of HC further suggest that analyzed oils belong to paraffinic oils. The n-alkane and isoprenoid distributions reveal that the analyzed oils are derived from marine source rock, containing mixed organic matter, with some terrestrial input and deposited under relatively reducing conditions. The features of the analyzed oils are consistent with the Madbi source rock characteristics in the basin.     

Performance Analysis of Prefix Delegation-Based Route Optimization Schemes: Effects of Increasing the Number of Nodes

Prefix delegation-based schemes have been proposed to solve the route optimization problem in NEtwork MObility where multiple IP-enabled hosts move together as a mobile network. Differences in the route optimization for hosts at the cost of increased signaling will result in performance difference of the schemes depending on parameters, such as speed of the mobile network, its distance from the home network (the network to which mobile network usually belongs), and the number of hosts in the mobile network. Although the effects of the first two parameters on the performance of the schemes have been studied, effects of increasing the number of hosts have not been studied. Therefore, there is a need to evaluate performance when the number of hosts is increased. We perform the evaluation through ns-2 simulation. Results show that the performance superiority achieved by the hosts?? route optimization is only affected by the distance significantly only when the number of hosts is small. The results will help to decide when to use the route optimization for hosts depending on the values of the parameters.