Identification of tool parallel axis offset through the analysis of the topography of surfaces machined by peripheral milling

A method for the identification of the tool parallel axis offset (TPAO) that occurs when the end mill is held in the spindle is developed. The method is based on the analysis of the topography of surfaces machined by peripheral milling and considers the cutter grinding errors. As known from the literature, TPAO causes each cutting edge to be at a different radius from the spindle axis and creates transition bands in the topography of milled surfaces, in which roughness grooves generated by different teeth blend together. In this paper, the TPAO, defined by the distance of the tool axis from the spindle axis and by an angle relating the offset direction to the position of cutting edges, is expressed as a function of the width of the roughness grooves at any height of the transition bands. This expression allows the TPAO to be estimated by measuring the groove widths at only two heights and solving a system of two linear equations. In order to obtain the groove widths, a procedure based on digital image processing is developed. Through this procedure, the groove widths are estimated at more than the two necessary heights without high computational cost. This leads to the resolution of an overdetermined system of linear equations that allows the TPAO to be identified with more accuracy. Finally in order to verify the predictions of the proposed method, a series of cutting tests were carried out. A reasonable agreement between the experimental results and the predicted ones was found.     

Effects of club size in the provision of public goods. Network and congestion effects in the case of the French municipalities

The article formalizes and measures the impact of club size on the quality of the public good provided to its members. Under a general framework we describe various functional forms that allow either network or crowding effects. Mechanisms of provision are that of a political process in which both the demand and the supply sides are considered. Estimations use the whole set of French municipalities. The supply model performs better than the demand model in the case of small municipalities, while for large cities the demand model has higher explanatory power. In so far as impact of city size on the quality of club goods is concerned, crowding does appear, but it does so in different patterns. For small towns marginal congestion first decreases then increases with population. Marginal congestion is decreasing for cities of intermediate size. For larger cities no significant effects are observed. Received: 27 June 2000 / Accepted: 20 August 2001 RID="*" ID="*" We have received particularly helpful comments from the editor-in-chief and two anonymous referees. We also thank Danièle Moret-Bailly for her friendly computational assistance.     

pH-metric study of the setting reaction of monocalcium phosphate monohydrate/calcium oxide-based cements

Hydraulic calcium phosphate cements (CPCs) that are used as osseous substitutes, set by an acid–base reaction between an acid calcium phosphate and a basic calcium salt (often a phosphate). In order to gain a better understanding of the setting of the monocalcium phosphate monohydrate–calcium oxide cement that we developed and in the aim to improve its mechanical properties, the setting reaction was studied by pH-metry. The two methods described in the literature were used. In the first, cement samples were prepared then crushed after different storage periods at 37 °C, 100% RH. The powder was then immersed in pure water with stirring and the pH was measured after equilibration. In the second technique, the starting materials were poured into water while stirring and the pH were followed over time. The two methods gave different results. The first procedure provided information concerning the pH of the surrounding liquid following the partial dissolution of the cement components, rather than any information about pH changes during setting. The second method is more appropriate to follow the pH variations during setting. In this second procedure, the effects of different parameters such as crushing time, stirring rate, liquid-to-powder (L/P) ratio and temperature were investigated. These parameters may impact substantially on the shape and position of the pH=f(t) curves. One or three pH jumps were observed during the setting depending on the composition of the liquid phase. The time at which these pH jumps occurred depended on the pH of the liquid phase, the concentration of the buffer, the crushing of starting materials, the L/P ratio and the temperature. Good linear correlations were obtained (i) between the time of the pH jumps and the L/P ratio and the temperature and (ii) between the time of the first pH jump and the compressive strength and the final setting time of the cements prepared with different liquid phases. It may be assumed in view of these correlations that the results obtained in dilute solution may be extrapolated to the conditions of cement sample preparation and that the mechanical properties of the cement are directly related to the phenomena that occur at the first pH jump which corresponds to precipitation of dicalcium phosphate dihydrate.     

Retrieval of the ultraviolet aerosol optical depth during a spring campaign in the Bavarian Alps

A measurement campaign was organized in March 1999 in the Bavarian Alps as part of the European project, Characteristics of the UV Radiation Field in the Alps (CUVRA), to analyze the effect of altitude, aerosols, and snow cover on ground-level UV spectral irradiance. We present the results of simultaneous measurements of aerosol optical depth (AOD) made at various sites on two cloudless days in March 1999. The two days exhibited different aerosol conditions. Results derived from spectral measurements of UV irradiance are compared with data from filter radiometer measurements made at discrete wavelengths extending from the UV to the near IR. The different methods generated values for the AOD that were in good agreement. This result confirms that one can use either method to retrieve the AOD with an uncertainty of approximately 0.03-0.05. On 18 March, high turbidity was observed at low altitude (400-nm AOD approximately 0.5 at 700 m above sea level), and the AOD decreased regularly with altitude; on 24 March, the turbidity was much less (0.11 at 700 m above sea level). On both days very low AODs (0.05-0.09) were measured at 3000 m above sea level. The spectral dependence of the AOD is often parameterized by the angstrom relationship; the alpha parameter is generally difficult or impossible to retrieve from spectral measurements because of the relatively narrow wavelength range (320-400 nm), and only one of the spectro-radiometers used during the campaign permits this retrieval. In most cases, during this field campaign, alpha was found by filter sunphotometers to be 1.1-1.5.     

Systemic classification of concern-based design methods in the context of enterprise architecture

Enterprise Architecture (EA) is a relatively new domain that is rapidly developing. “The primary reason for developing EA is to support business by providing the fundamental technology and process structure for an IT strategy” [TOGAF]. EA models have to model enterprises facets that span from marketing to IT. As a result, EA models tend to become large. Large EA models create a problem for model management. Concern-based design methods (CBDMs) aim to solve this problem by considering EA models as a composition of smaller, manageable parts—concerns. There are dozens of different CBDMs that can be used in the context of EA: from very generic methods to specific methods for business modeling or IT implementations. This variety of methods can cause two problems for those who develop and use innovative CBDMs in the field of Enterprise Architecture (EA). The first problem is to choose specific CBDMs that can be used in a given EA methodology: this is a problem for researchers who develop their own EA methodology. The second problem is to find similar methods (with the same problem domain or with similar frameworks) in order to make a comparative analysis with these methods: this is a problem of researchers who develop their own CBDMs related to a specific problem domain in EA (such as business process modeling or aspect oriented programming). We aim to address both of these problems by means of a definition of generic Requirements for CBDMs based on the system inquiry. We use these requirements to classify twenty CBDMs in the context of EA. We conclude with a short discussion about trends that we have observed in the field of concern-based design and modeling.     

Satellite-derived parameters for biological modelling in coastal waters: Illustration over the eastern continental shelf of the Bay of Biscay

In biological modelling of the coastal phytoplankton dynamics, the light attenuation coefficient is often expressed as a function of the concentrations of chlorophyll and mineral suspended particulate matter (SPM). In order to estimate the relationship between these parameters over the continental shelf of the northern Bay of Biscay, a set of in situ data has been gathered for the period 1998-2003 when SeaWiFS imagery is available. These data comprise surface measurements of the concentrations of total SPM, chlorophyll, and irradiance profiles from which is derived the attenuation coefficient of the photosynthetically available radiation, K_PAR. The performance of the IFREMER look-up table used to retrieve the chlorophyll concentration from the SeaWiFS radiance is evaluated on this new set of data. The quality of the estimated chlorophyll concentration is assessed from a comparison of the variograms of the in situ and satellite-derived chlorophyll concentrations. Once the chlorophyll concentration is determined, the non living SPM, which is defined as the SPM not related to the dead or alive endogenous phytoplankton, is estimated from the radiance at 555 nm by inverting a semi-analytic model. This method provides realistic estimations of concentrations of chlorophyll and SPM over the continental shelf all over the year. Finally, a relationship, based on non living SPM and chlorophyll, is proposed to estimate K_PAR on the continental shelf of the Bay of Biscay. The same formula is applied to non living SPM and chlorophyll concentrations, observed in situ or derived from SeaWiFS radiance.     

Practical L2 disturbance attenuation for nonlinear systems

In this work, a notion of generalized L₂-gain for nonlinear systems, where the gain is considered as a function of the state instead of a (global) constant, is presented. This new notion seems to be adequate to characterize the gain properties of several nonlinear systems which do not possess a uniform L₂-gain property (i.e. the L₂-gain depends on the operating point). Moreover, a notion of practical L₂-gain attenuation, which extends the standard definition and parallels (mutatae mutandis) the concepts of practical stability, is also proposed.