Al2O3-ZrO2 Finely Structured Multilayer Architectures from Suspension Plasma Spraying

Suspension plasma spraying (SPS) is an alternative to conventional atmospheric plasma spraying (APS) aiming at manufacturing thinner layers (i.e., 10-100 μm) due to the specific size of the feedstock particles, from a few tens of nanometers to a few micrometers. The staking of lamellae and particles, which present a diameter ranging from 0.1 to 2.0 μm and an average thickness from 20 to 300 nm, permits to manufacture finely structured layers. Moreover, it appears as a versatile process able to manufacture different coating architectures according to the operating parameters (suspension properties, injection configuration, plasma properties, spray distance, torch scan velocity, scanning step, etc.). However, the different parameters controlling the properties of the coating, and their interdependences, are not yet fully identified. Thus, the aim of this paper is, on the one hand, to better understand the influence of operating parameters on the coating manufacturing mechanisms (in particular, the plasma gas mixture effect) and, on the other hand, to produce Al₂O₃-ZrO₂ finely structured layers with large varieties of architectures. For this purpose, a simple theoretical model was used to describe the plasma torch operating conditions at the nozzle exit, based on experimental data (mass enthalpy, arc current intensity, thermophysical properties of plasma forming gases, etc.) and the influences of the spray parameters were determined by mean of the study of sizes and shapes of spray beads. The results enabled then to reach a better understanding of involved phenomena and their interactions on the final coating architectures permitting to manufacture several types of microstructures.     

Emulsifying and Foaming Properties of Protein Concentrates Prepared from Cowpea and Bambara Bean Using Different Drying Methods

Effect of cabinet-drying, vacuum-drying, and freeze-drying methods on the surface hydrophobicity, secondary structure, emulsifying, and foaming properties of protein concentrates prepared from different cultivars of cowpea and Bambara bean was investigated. The vacuum-drying method reduced hydrophobicity, while freeze-dried concentrates presented high hydrophobicity. The concentrates prepared by freeze drying presented more β-sheet (40–43%) and less β-turn (19–24%) structures. Bambara bean protein concentrates prepared by freeze-drying presented higher emulsifying activity (56–59%) compared to those by vacuum-drying and cabinet-drying, while emulsifying activity varied significantly among cultivars of cowpea (46–61%). Protein concentrates prepared by cabinet-drying showed the highest foaming ability.     

The catalysis of the Ruff oxidative degradation of aldonic acids by titanium‐containing zeolites

Ti‐BEA and Ti‐FAU, obtained by post‐synthesis treatment, and TS‐1, obtained by direct hydrothermal synthesis, have been tested as catalysts for the Ruff oxidative degradation of calcium d‐gluconate to d‐arabinose using diluted hydrogen peroxide as oxidant. Only large‐pore zeolites Ti‐BEA and Ti‐FAU were found to be active. It was shown, in particular, that a very rapid leaching of titanium occurred and that the titanium species present in the solution were responsible for the catalytic activity observed. This revised version was published online in August 2006 with corrections to the Cover Date.     

Inactivation of Escherichia coli and Listeria innocua in kiwifruit and pineapple juices by high hydrostatic pressure

Escherichia coli and Listeria innocua in kiwifruit and pineapple juices were exposed to high hydrostatic pressure (HHP) at 300 MPa for 5 min. Both bacteria showed equal resistance to HHP. Using low (0 degrees C) or sub-zero (-10 degrees C) temperatures instead of room temperature (20 degrees C) during pressurization did not change the effectiveness of HHP treatment on both bacteria in studied juices. Pulse pressure treatment (multiple pulses for a total holding time of 5 min at 300 MPa) instead of continuous (single pulse) treatment had no significant (p>0.05) effect on the microbial inactivation in kiwifruit juice; however, in pineapple juice pulse treatment, especially after 5 pulses, increased the inactivation significantly (p<0.05) for both bacteria. Following storage of pressure-treated (350 MPa, 20 degrees C for 60 s x 5 pulses) juices at 4, 20 and 37 degrees C up to 3 weeks, the level of microbial inactivation further increased and no injury recovery of the bacteria were detected. This work has shown that HHP treatment can be used to inactivate E. coli and L. innocua in kiwifruit and pineapple juices at lower pressure values at room temperature than the conditions used in commercial applications (>400 MPa). However, storage period and temperature should carefully be optimized to increase the safety of HHP treated fruit juices.     

Prolonged display or rapid internalization of the IgG-binding protein ZZ anchored to the surface of cells using the diphtheria toxin T domain

We have shown previously that the diphtheria toxin transmembranedomain (T) may function as a membrane anchor for soluble proteinsfused at its C-terminus. Binding to membranes is triggered byacidic pH. Here, we further characterized this anchoring device.Soluble proteins may be fused at the N-terminus of the T domainor at both extremities, without modifying its membrane bindingproperties. This allows one to choose the orientation of theprotein to be attached to the membrane. Maximum binding to thecell surface is reached within 1 h. Anchoring occurs on cellspreviously treated with proteinase K, suggesting that T interactswith the lipid phase of the membrane without the help of cellsurface proteins. Binding does not permeabilize cells or affectcell viability, despite the fact that it permeabilizes liposomesand alters their structure. When attached to L929 fibroblasts,the proteins are not internalized and remain displayed at theirsurface for more than 24 h. When bound to K562 myeloid cells,the molecules are internalized and degraded. Thus, dependingon the cell type, soluble proteins may be anchored to the surfaceof cells by the T domain for an extended time or directed towardsan internalization pathway.     

Study of effect of old corrugated cardboard in properties of polypropylene composites: Study of mechanical properties,thermal behavior,and morphological properties

The investigation of the economical use of lignocellulose waste, which is one of the environmental problems facing nations, is ongoing. In this study, waste cardboard paper fiber reinforcing polypropylene (PP) composites was developed. In order to modify the PP matrix maleated PP (MA‐g‐PP) a 5 wt% and a grafting rate of 1 and 2 wt% was used as a compatibilizer. The effects of fiber and compatibilizer content as well as graft content are evaluated by mechanical, thermal property measurements, and scanning electron microscopy (SEM). The compatibilizer improved all mechanical properties significantly. Thus, the tensile strength of MA‐g‐PP‐containing composites increases compared to PP/cardboard composites paper content increases. However, the tensile modulus of a PP‐based composite increases with an increase in paper fiber with the compatibilizer having little effect. SEM revealed that the addition of MA‐g‐PP generates strong interactions between a PP matrix and paper fibers. However, the addition of the MA‐g‐PP compatibilizing agent gives a significant improvement on the crystallization of the composites, whereas the compatibilized PP/old corrugated cardboard (OCC) composites have higher crystallinity (Xc) than uncompatibilized PP/OCC composites. The MA‐g‐PP also diminished the water absorption in the composites. J. VINYL ADDIT. TECHNOL., 22:231–238, 2016. © 2014 Society of Plastics Engineers     

Densification of 8Y‐Tetragonal‐Stabilized Zirconia Optoceramics with Improved Optical Properties by Y Segregation

8% Yttria‐stabilized zironcia (8YSZ) transparent ceramics have a wide technological applications. Segregation of the Y around the grain boundaries is favored by slow heating rate. The optimized sintering parameters helped in obtaining transparent ceramics of 8YSZ with a high percentage of cubic phase in addition to the presence of tetragonal phase. HRTEM was used to verify the grain growth suppression and to observe the presence of the cubic phase. The presence of cubic phase has suppressed the grain growth, which increased the transparency in the visible and infrared region without the addition of dopants or by utilizing high pressure.     

Dual,Site‐Specific Modification of Antibodies by Using Solid‐Phase Immobilized Microbial Transglutaminase

Microbial transglutaminase (MTG) was stably solid‐phase immobilized on glass microbeads by using a second‐generation dendronized polymer. Immobilized MTG enabled the efficient generation of site‐specifically conjugated proteins, including antibody fragments, as well as whole antibodies through distinct glutamines and, unprecedentedly, also through lysines with various bifunctional substrates with defined stoichiometries. With this method, we generated dual, site‐specifically modified antibodies comprising a fluorescent probe and a metal chelator for radiolabeling—a strategy anticipated to design antibodies for imaging and simultaneous therapy. Furthermore, we provide evidence that immobilized MTG features higher siteselectivity than soluble MTG.     

Modelling of flocculation using a population balance equation

In this paper, a model based on a population balance equation (PBE) is developed. It aims at reproducing experimental floc size distributions obtained at steady state in a jar-test. The objective is to develop a simple model, based on physical phenomena, and that does not contain any adjustable parameters. Floc size distributions obtained using a part of a particle image velocimetry (PIV) device and image analysis are used to develop mathematical expressions for the aggregation and breakage kernels. A critical volume beyond which breakage is of significant importance is identified and related to the hydrodynamics. Hydrodynamic sequencing allows the distribution of the daughter particles resulting from a breakage event to be established. The model is finally successfully validated against experimental results.     

Electroless ultrasonic functionalization of diamond nanoparticles using aryl diazonium salts

We report a novel and very handful strategy for the functionalization of diamond nanoparticles (NDs), based on the ultrasound-assisted grafting of aryl groups from the electroless reduction of diazonium salts. For this study, 4-nitrobenzenediazonium salt was used as a model molecule and the reaction was investigated in neutral and acidic aqueous media. Spectroscopic evidence for the successful attachment of aryl groups to nanodiamonds (NDs) was given by IR and XPS which clearly detect characteristic NO₂ peaks. Moreover, the absence of any peaks from the ⁺N≡N group in the IR spectra is a clear indication of the chemical reduction of the parent diazonium salt at the surface of NDs. This spontaneous chemical modification of NDs by aryl diazonium salts was confined to the surface of the ND particles; indeed, XRD measurements have shown that the crystalline structure of the bulk of the particles was unaffected. It opens up new possibilities towards the control of the surface chemical composition of NDs using simple protocols operated in very soft conditions, i.e. in water at room temperature. It shows conclusively that the chemistry toolbox of experts interested in nanodiamonds should contain aryl diazonium salts, given their versatility in forming active platforms.