Preparation of solid polymer electrolyte composites: investigation of the ion-exchange process

The rate of ion-exchange between an aqueous solution of platinum tetramine and a Nafion^® 117 membrane in H⁺ form is studied. Experimental data are collected using extended X-ray absorption fine structure (EXAFS) spectroscopy in dispersive mode. Results are obtained for various platinum tetramine concentrations in the solution and different hydrodynamic regimes at the membrane-solution interface. A shift from a layer diffusion controlled rate (L) to a membrane diffusion controlled rate (M) is observed when the salt concentration and the stirring of the solution are increased. Time dependent fractional concentration in platinum tetramine inside the membrane are computed for the two limiting cases of diffusion (L and M). Good agreement is found between experimental and simulated data. The role of the rate of ion-exchange on the electrochemical performances of electrode-membrane-electrode composites for water electrolysis applications is discussed.List of symbols A surface of the membrane contacting the solution (1.0 cm²) - A _Pt geometrical area of the platinum RDE (cm²) - C _i concentration of species i in the bulk solution (mol cm^–3) - C _i ^/* concentration of species i in the membrane (mol cm^–3) - C ^– sulfonate concentration in the membrane (mol cm^–3) - C ₀ concentration at the membrane-solution interface (mol cm^–3) - D _i diffusion coefficient of species i in the solution (cm² s^–1) - D _i ^/* diffusion coefficient of species i in the membrane (cm² s^–1) - F Faraday (96 500 C mol^–1) - I _L limiting current of diffusion (A) - K equilibrium constant = at equilibrium = 48 (298 K) - l diffusion layer thickness (cm) - L diameter of the cell (1.2cm) - n number of electron exchanged (2) during the electrooxidation of [Pt(NH₃)₄]²⁺ - N _i fractional concentration of species i in the membrane = z _i C _i ^*/C ^– - Re Reynolds number defined as l/ - Sc Schmidt number defined as /D - t _1/2 time at which 50% of the ion-exchange is achieved - velocity of the solution (cm s^–1) - V volume of the membrane (0.01 cm³) - z _i charge beared by species i - kinematic viscosity of the solution (0.0114 cm² s^–1) assumed to be equal to that of pure water at 298 K - membrane thickness (cm) - rotation speed of the RDE (rad s^–1)     

BiNem® manufacturing process for mass production

Abstract— As the need for high‐resolution ultra‐low‐power bistable displays grows, it is important to rapidly implement the mass‐production manufacturing of BiNem® LCDs. The cost‐effective approach for BiNem® manufacturing is based on using STN manufacturing process technologies since BiNem® and STN displays have a similar internal structure. The key differences between BiNem® and STN displays from a manufacturing point of view will be discussed. We show that industrial STN manufacturing equipment can be used to produce BiNem® LCDs at competitive costs. Reflective e‐book display modules with VGA resolution are produced in the pilot‐production series.     

Inferential Queueing and Speculative Push

Communication latencies within critical sections constitute a major bottleneck in some classes of emerging parallel workloads. In this paper, we argue for the use of two mechanisms to reduce these communication latencies: Inferentially Queued locks (IQLs) and Speculative Push (SP). With IQLs, the processor infers the existence, and limits, of a critical section from the use of synchronization instructions and joins a queue of lock requestors, reducing synchronization delay. The SP mechanism extracts information about program structure by observing IQLs. SP allows the cache controller, responding to a request for a cache line that likely includes a lock variable, to predict the data sets the requestor will modify within the associated critical section. The controller then pushes these lines from its own cache to the target cache, as well as writing them to memory. Overlapping the protected data transfer with that of the lock can substantially reduce the communication latencies within critical sections. By pushing data in exclusive state, the mechanism can collapse a read-modify-write sequences within a critical section into a single local cache access. The write-back to memory allows the receiving cache to ignore the push. Neither mechanism requires any programmer or compiler support nor any instruction set changes. Our experiments demonstrate that IQLs and SP can improve performance of applications employing frequent synchronization.     

Morphological and chemical studies of pathological human and mice brain at the subcellular level: correlation between light, electron, and nanosims microscopies

Neurodegenerative diseases induce morphological and chemical alterations in well-characterized regions of the brain. Understanding their pathological processes requires the use of methods that assess both morphological and chemical alterations in the tissues. In the past, microprobe approaches such as scanning electron microscopy combined with an X-ray spectrometer, Proton induced X-ray emission, secondary ion mass spectrometry (SIMS), and laser microprobe mass analysis have been used for the study of pathological human brain with limited success. At the present, new SIMS instruments have been developed, such as the NanoSIMS-50 ion microprobe, that allow the simultaneous identification of five elements with high sensitivity, at subcellular spatial resolution (about 50-100 nm with the Cs(+) source and about 150-200 nm with O(-) source). Working in scanning mode, 2D distribution of five elements (elemental maps) can be obtained, thus providing their exact colocalization. The analysis can be performed on semithin or ultrathin embedded sections. The possibility of using transmission electron microscopy and SIMS on the same ultrathin sections allows the correlation between structural and analytical observations at subcellular and ultrastructural level to be established. Our observations on pathological brain areas allow us to establish that the NanoSIMS-50 ion microprobe is a highly useful instrument for the imaging of the morphological and chemical alterations that take place in these brain areas. In the human brain our results put forward the subcellular distribution of iron-ferritin-hemosiderin in the hippocampus of Alzheimer disease patients. In the thalamus of transgenic mice, our results have shown the presence of Ca-Fe mineralized amyloid deposits.     

Applying chemical engineering concepts to non-thermal plasma reactors

Process scale-up remains a considerable challenge for environmental applications of non-thermal plasmas.Undersanding the impact of reactor hydrodynamics in the performance of the process is a key step to overcome this challenge.In this work,we apply chemical engineering concepts to analyse the impact that different non-thermal plasma reactor configurations and regimes,such as laminar or plug flow,may have on the reactor performance.We do this in the particular context of the removal of pollutants by non-thermal plasmas,for which a simplified model is available.We generalise this model to different reactor configurations and,under certain hypotheses,we show that a reactor in the laminar regime may have a behaviour significantly different from one in the plug flow regime,often assumed in the non-thermal plasma literature.On the other hand,we show that a packed-bed reactor behaves very similarly to one in the plug flow regime.Beyond those results,the reader will find in this work a quick introduction to chemical reaction engineering concepts.     

A differential inclusion approach for modeling and analysis of dynamical systems under uncertainty

In this paper we deal with the application of differential inclusions to modeling nonlinear dynamical systems under uncertainty in parameters. In this case, differential inclusions seem to be better suited to modeling practical situations under uncertainty and imprecision than formulations by means of fuzzy differential equations. We develop a practical algorithm to approximate the reachable sets of a class of nonlinear differential inclusion, which eludes the computational problems of a previous set-valued version of the Heun’s method. Our algorithm is based on a complete discretization (time and state space) of the differential inclusion and it suits hardware features, handling the memory used by the method in a controlled fashion during all iterations. As a case of study, we formulate a differential inclusion to model an epidemic outbreak of dengue fever under Cuban conditions. The model takes into account interaction of human and mosquito populations as well as vertical transmission in the mosquito population. It is studied from the theoretical point of view to apply the Practical Algorithm. Also, we estimate the temporal evolution of the different human and mosquito populations given by the model in the Dengue 3 epidemic in Havana 2001, through the computation of the reachable sets using the Practical Algorithm.     

Electroseparation of an antibacterial peptide fraction from snow crab by-products hydrolysate by electrodialysis with ultrafiltration membranes

Recently, a snow crab by-products hydrolysate has demonstrated antibacterial properties due to a peptide with a molecular weight of about 800 Da, but only at high concentration. Consequently, peptide hydrolysate has been fractionated to obtain peptides in a more purified form. The aim of this work was to separate a snow crab by-products hydrolysate by electrodialysis with ultrafiltration membranes (EDUF). EDUF, which allows separation of molecules according to their charges and molecular weights, was used to recover and concentrate the active antibacterial fraction. Two different ultrafiltration membranes (20 and 50 kDa) and two electrical field strengths (2 and 14 V/cm) were used as separation parameters. After EDUF separation, the 300-600 Da peptide molecular weight range was the most recovered with an abundance of 94%. Moreover, fractionation at 14 V/cm with ultrafiltration membranes of 50 kDa allowed the recovery of an anionic fraction which showed antibacterial properties on Escherichia coli ATCC 25922 and Listeria innocua HPB 13.     

A cross‐cultural comparison of colour emotion for two‐colour combinations

Psychophysical experiments were conducted in the UK, Taiwan, France, Germany, Spain, Sweden, Argentina, and Iran to assess colour emotion for two‐colour combinations using semantic scales warm/cool, heavy/light, active/passive, and like/dislike. A total of 223 observers participated, each presented with 190 colour pairs as the stimuli, shown individually on a cathode ray tube display. The results show consistent responses across cultures only for warm/cool, heavy/light, and active/passive. The like/dislike scale, however, showed some differences between the observer groups, in particular between the Argentinian responses and those obtained from the other observers. Factor analysis reveals that the Argentinian observers preferred passive colour pairs to active ones more than the other observers. In addition to the cultural difference in like/dislike, the experimental results show some effects of gender, professional background (design vs. nondesign), and age. Female observers were found to prefer colour pairs with high‐lightness or low‐chroma values more than their male counterparts. Observers with a design background liked low‐chroma colour pairs or those containing colours of similar hue more than nondesign observers. Older observers liked colour pairs with high‐lightness or high‐chroma values more than young observers did. Based on the findings, a two‐level theory of colour emotion is proposed, in which warm/cool, heavy/light, and active/passive are identified as the reactive‐level responses and like/dislike the reflective‐level response. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2012     

Bulk and Surface Properties of Liquid Al-Li and Li-Zn Alloys

Physicochemical properties like density, surface tension, and viscosity of liquid binary Al-Li and Li-Zn alloys have been measured using draining crucible method. The experimentally measured surface-tension values have been compared to theoretical results based either on the Butler model or the compound formation model assuming the existence of the most favored A ₁ B ₂ and A ₂ B ₃ clusters. Several models for viscosity calculation have been also applied and discussed in confrontation with measured data. Finally, the clustering effects in the liquid Al-Li and Li-Zn alloys have been examined using two microscopic functions, i.e., the concentration fluctuation function in the long-wavelength limit and the Warren-Cowley short-range order parameter.